|
Filter Products - spin on elements |
A series of spin-on filters are accessorized with a selection of adapters/heads
for a variety of applications. Indicators, gage ports and by-pass valves are
available to customize each application.
Hydraulic fluids are efficiently filtered through return line applications.
Maximum working pressure 100 PSI/Burst 300 PSI. Used for:
|
Industrial in-plant equipment |
Marine hydraulic systems |
| Off
Highway |
Ground Transportation |
Mobile Equipment |
20 GPM P/N 70134 - 10 Micron P/N 70135 - 25 Micron
The 20 Series Spin-on Standard Length has 1"-12 UNF threads.
Overall Dimensions: diameter of 3.7" (94mm) with a length of 5.25" (133mm).
Interchangeable with:
- Fleetguard HF6500 Series
- Parker 12 AT Series
- PTI F4E-030 Series
- Zinga AE Series
50 GPM P/N 70157 - 10 Micron P/N 70158 - 25 Micron
The 40 Series Spin-on Standard Length has 1-1/2"16 UNF threads.
Overall Dimensions: diameter of 5.06" (129mm) with a length of 7" (178mm)
Interchangeable with:
- LHA SPE-50 Series
- Pall HC7500 Series
- Pall HC9500 Series
- Parker 50AT Series
- PTI F4E-050 Series
- PTI F4S-050 Series
- Zinga SE Series
80 GPM P/N 70171 - 10 Micron P/N 70172 - 25 Micron
The 40 Series Spin-on Extended Length has 1-1/2"16 UNF threads.
Overall Dimensions: diameter of 5.06" (129mm) with a length of 11" (279mm).
Interchangeable with:
- Fleetguard 6700 Series
- Pall HC'7500-8H Series
- Pall HC9500-8H Series
- PTI F4E-070 Series
- Zinga LE Series
|
filter products - accessories |
|
20 GPM 3/4" NPT
P/N 50184 -
All gage ports / 3 PSI by-pass
P/N 50186 -
All gage ports / 25 PSI by-pass
The 20 Series Single adapter accepts the 20 series standard and
extended length filters. The adapter is made of die cast aluminum with
standard 3/4" NPT Ports.
50 GPM 1" NPT
P/N 50113 -
All gage ports / 3 PSI by-pass
P/N 50116 -
All gage ports / 25 PSI by-pass
The 40-A Series single adapter accepts the 40 series standard and
extended length filters. The adapter is made of die cast aluminum with 1"
NPT Ports.
80 GPM 1-1/4" NPT
P/N 50143 -
All gage ports / 25 PSI by-pass
The 40-B Series single adapter accepts the 40 series standard and
extended length filters. The adapter is made of die cast aluminum with
standard 1-1/4" NPT Ports.
90 GPM 1-1/2" NPT
P/N SP100 -
Gage ports / 25 PSI by-pass
P/N SP 80 -
Gage ports / 25 PSI by-pass
SP 100 is a double filter with end to end assembly. Uses 40 series
filter elements. SP 80 is a double filter (pictured) with side by side
filters. Uses 40 series elements.
Gages are available for all filter heads. (1/8" NPT thread)
P/N BT1215P is 30 PSI, 1-1/2" dial
P/N HSP1SP is 100 PSI, 1-1/2" dial |
|
