Electric Switch Kit for Versa-Pak® Unloader

Part No. 999-00953
The Switch Kit provides for easy operation and installation of cab controls. The kit includes switch/light, switch bracket, wire, fuse, and connectors.

Solenoid Drain Hose Kit

Part No. 999-00946
Simplify installation of the Unloader with this hose kit. The kit consists of one 3/8" hose assembly and fittings.

Solenoid for Versa-Pak® Unloaded

Part No. 999-00948
Use this Solenoid to convert the Versa-Pak® Kit to a functional Unloader Value. You will also need the proper orifice.



 

Electric/Air Shift Kit for Dry Valve

Part No. 999-00954
The Switch Kit provides for easy operation and installation. The kit includes electric/air solenoid, switch/light, bracket, wire, connectors, pressure protection valve, tubing, and fittings.

Excess Flow Hose Kit

Part No. 999-00945
Excess flow is returned to the Dry Valve for easy installation and also assists in the reduction of cavitation at high RPM. The kit consists of one 3/4" hose assembly and fittings.

Conversion Kit for Versa-Pak® Flow Control

Part No. 999-00955
The Kit provides for easy conversion of Versa-Pak® valve Kit to the Flow Control Function. Kit includes solenoid port plug and T1 port plug. You will also need the proper orifice.

Manual Shift Kit for Dry Valves

Part No. 999-00958
The Toggle Valve Kit provides for easy in dash control. Kit includes air valve, pressure protection valve, light, tubing, and fittings.

 

CH Series Gear Pumps

CH Series pumps are available in three sizes: 3.84, 5.12, and 6.40 cubic inches. They are pad mounted with dual 1 1/8" keyed shafts. All CH Series pumps come with a 1 1/2" NPT inlet port. The CH384-15 and CH512-20 each have 3/4" ODT discharge ports and the CH640 has a 1" ODT discharge port.

P3000 and P5000 Series Roller Bearing Pumps

Built tough to withstand the rough service commonly associated with the refuse industry. Typical applications include: recycle vehicles, compactors, roll-offs, automated side loaders, and all PTO driven pump applications. P3000’s and P5000’s are available in a wide variety of configurations including Dry Valve and Unloader Applications.

Port Adaptor Kit

Part No. 514-00952  1 1/2"
Part No. 514-00951  2"
Quickly and easily converts Pump without "counterbored" inlet port to fit applications where counterboring is necessary.

Orifice Plug

Part No. 999-0949-(XX)
Last two digits represent GPM. Insert Versa-Pak® Valve Kit to deliver proper flow to regulated port. See installation manual for proper sizing.