Home » Hydraulics Shop » Hydraulic Pumps » Hydraulic Vane Pumps » Single Stage Vane Pumps » Fluidyne V20 WF8201139 Vane Pump | Replacement for Vickers/Eaton V201P5P62C11R 1.8 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Fluidyne V20 WF8201139 Vane Pump | Replacement for Vickers/Eaton V201P5P62C11R 1.8 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft

Fluidyne V20 WF8201139 Vane Pump | Replacement for Vickers/Eaton V201P5P62C11R 1.8 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft - Image 2

Specifications

Weight	18 lbs
Pump Mounting Flange	2-Bolt Flange (SAE "A" size)
Manufacturer	Fluidyne Fluid Power
Pumps Drive Shaft	3/4" Straight Shaft with Key
Pumps Rotation	Right-Hand (Clockwise)
Pumps Max Pressure	2500 psi
Pumps Rated Speed	1200 RPM
Pumps Max Speed	3400 RPM
Pumps Displacement	18.0 cm³/r (1.10 in³/r)
Pumps Ports In	G1" BSPP Straight Thread
Pumps Ports Out	G1/2" BSPP Straight Thread

Product Selection Guide

These FluiDyne V20 Series hydraulic vane pumps all offer direct Vickers interchangeability and are built to SAE J744 standards, but differ in flow rate, displacement, max speed, port orientation, shaft type, rotation, and inlet/outlet sizing. Choosing the right model depends on system flow demand, piping layout, available mounting space, and drive direction. For a broader selection, see our hydraulic pumps catalog.

?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.

Model Number	Flow Rate	Max Pressure	Displacement	Mounting
WF8201139 (Current)	5.7 GPM	2500 PSI	18.0 cm³/r (1.10 in³/r)	2-Bolt Flange (SAE “A” size)
WF8201138	13.5 GPM	2500 PSI	42.6 cm³/r (2.60 in³/r)	2-Bolt Flange (SAE “A” size)
WF8201144	8.4 GPM	2500 PSI	26.6 cm³/r (1.62 in³/r)	2-Bolt Flange (SAE “A” size)
WF8201179	9.4 GPM	2500 PSI	29.7 cm³/r (1.81 in³/r)	2-Bolt Flange (SAE “A” size)
WF8201171	8.4 GPM	2500 PSI	26.6 cm³/r (1.62 in³/r)	2-Bolt Flange (SAE “A” size)

Key Differences

Flow Rate & Displacement

Difference: WF8201138 offers the highest flow (13.5 GPM, 2.60 in³/r); WF8201139 is lowest (5.7 GPM, 1.10 in³/r); WF8201144, WF8201171 (8.4 GPM, 1.62 in³/r), WF8201179 (9.4 GPM, 1.81 in³/r)

Selection Guide: Select higher displacement/flow models for systems with large actuators or multiple functions; use lower flow models for compact or lower-demand systems

Max Speed

Difference: WF8201139/1138 rated for 1200 RPM, WF8201144/1171/1179 up to 2800 RPM

Selection Guide: Choose WF8201144, WF8201171, or WF8201179 for high-speed drive applications

Rotation

Difference: WF8201179 is Left-Hand (Counter-Clockwise); other models are Right-Hand (Clockwise)

Selection Guide: Choose WF8201179 when your prime mover requires counter-clockwise pump rotation

Port Orientation

Difference: WF8201139/1138 have ports inline with inlet (0°); others are opposite (180°)

Selection Guide: Inline (0°) orientation suits straight-through piping; 180° is preferred if piping must exit on opposite sides

Shaft Type and Extension

Difference: WF8201139 has 9-tooth splined shaft; others use 3/4″ straight keyed shaft, with extension lengths varying (1.75″ or 2.66″). For a similar 18.0 cm³/r (1.10 in³/r) option, see V201P5P18C11R – FluiDyne V20 Pump.

Selection Guide: Select the splined shaft for higher-torque or splined coupler drives; straight shaft for standard keyed coupling

Inlet/Outlet Thread Size

Difference: WF8201139/1138/1144: 1-1/4″ NPT inlet; WF8201171: 1″ NPT inlet; WF8201179: 1-1/4″ NPT inlet. Outlet is typically 3/4″ NPT except WF8201179 (1-1/16″-12 straight)

Selection Guide: Match inlet/outlet size to your system piping to minimize flow restriction

Quick Selection Guide

If you need: Highest flow for large or multi-cylinder systems (over 9 GPM)

Choose: WF8201138

Because: Delivers 13.5 GPM at 1200 RPM, highest in this group

If you need: Compact flow and lower displacement for controlled motion or low-demand circuits

Choose: WF8201139

Because: Provides 5.7 GPM at 1.10 in³/r, minimizing heat and energy use

If you need: Medium flow with high drive speed (up to 2800 RPM)

Choose: WF8201144, WF8201171, or WF8201179

Because: Rated for 8.4–9.4 GPM and higher RPM, ideal for faster driven systems

If you need: Left-Hand (CCW) rotation for reverse drive applications

Choose: WF8201179

Because: Specifically designed for counter-clockwise rotation

If you need: Inline ports for straightforward plumbing

Choose: WF8201139 or WF8201138

Because: Feature 0° port orientation for simple pipe routing

If you need: Splined shaft for high-torque or splined coupling

Choose: WF8201139

Because: Only model in this group with 9-tooth splined shaft

Compatibility: All models meet SAE J744 mounting and are 100% Vickers interchangeable. G1″/G1/2″ BSPP straight thread ports and 2-bolt SAE ‘A’ flanges are consistent for easy replacement and integration.

Northern Hydraulics’ specialists can assist with model selection, Vickers cross-referencing, and troubleshooting at (800) 823-4937 (Mon-Fri, 7 AM – 5 PM MST). Volume pricing starts at 4 units. All pumps include a 12-month manufacturer warranty and same-day shipping on in-stock items.

Compatibility & Applications

Direct Replacement Information

The WF8201139 from Fluidyne directly replaces Vickers WF8201139 units, offering 18.0 cm³/r (1.10 in³/r) displacement and compatibility with systems up to 2500 PSI. This model is part of the V20 series, ensuring 100% interchangeability and easy installation in existing setups..

Mounting Pattern: SAE ‘A’ 2-bolt
Inlet Port: G1″ BSPP
Outlet Port: G1/2″ BSPP

Common Applications

Commonly used in agricultural equipment, construction machinery, utility vehicles. Learn more about vane pump applications in our resource center. For systems requiring integrated control, explore our pumps with integral valves applications.

agricultural equipment
construction machinery
utility vehicles

Important: Verify pump model WF8201139 matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.

Purchasing Information

Availability & Delivery

Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.

For current availability on WF8201139, call (800) 823-4937.

Warranty & Protection

12-month warranty covers manufacturing defects
30-day return window for unopened units
Free technical verification before ordering
Each pump pressure tested before shipment

Ordering Options

Order online for immediate processing. For single stage vane pumps, online ordering ensures fast turnaround. Phone orders welcome at (800) 823-4937.

Net 30 terms available for approved accounts. For account setup or questions about hydraulic pump compatibility, call our team.

Volume pricing available on orders of 4 or more units.

Support & Documentation

Installation guide included with every shipment
Technical drawings and specifications available
Cross-reference guides for common brands
Phone support: Monday-Friday, 7 AM – 5 PM MST

Questions? Call our specialists: (800) 823-4937

SKU: WF8201139

Fluidyne V20 WF8201139 Vane Pump | Replacement for Vickers/Eaton V201P5P62C11R 1.8 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Name: Fluidyne V20 WF8201139 Vane Pump | Replacement for Vickers/Eaton V201P5P62C11R 1.8 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft
Brand: Northern Hydraulics Inc.
SKU: WF8201139
Price: 299.2 USD
Availability: InStock