Home » Hydraulics Shop » Hydraulic Pumps » Hydraulic Vane Pumps » Single Stage Vane Pumps » Fluidyne V20 WF820223 Vane Pump | Replacement for Vickers/Eaton V201P8P1B11R 2.7 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Fluidyne V20 WF820223 Vane Pump | Replacement for Vickers/Eaton V201P8P1B11R 2.7 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft

Fluidyne V20 WF820223 Vane Pump | Replacement for Vickers/Eaton V201P8P1B11R 2.7 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft - Image 2

Specifications

Weight	18 lbs
Pump Mounting Flange	2-Bolt Flange (SAE "A" size)
Manufacturer	Fluidyne Fluid Power
Pumps Drive Shaft	3/4" Straight Shaft with Key (1.75" extension)
Pumps Rotation	Right-Hand (Clockwise)
Pumps Max Pressure	2500 psi
Pumps Rated Speed	1200 RPM
Pumps Max Speed	3200 RPM
Pumps Displacement	26.6 cm³/r (1.62 in³/r)
Pumps Ports In	G1" BSPP Straight Thread
Pumps Ports Out	G1/2" BSPP Straight Thread

Compatibility & Applications

Direct Replacement Information

The WF820223 from Fluidyne replaces Vickers WF820223 units in hydraulic systems requiring a displacement of 26.6 cm³/r (1.62 in³/r), supporting pressures up to 2500 PSI. Explore our full range of hydraulic pumps for other direct replacement options. This direct replacement ensures 100% interchangeability, following SAE J744 mounting standards and matching Vickers replacement pumps V20 series specifications..

Mounting Pattern: SAE ‘A’ 2-bolt
Inlet Port: G1″ BSPP
Outlet Port: G1/2″ BSPP

Common Applications

Commonly used in agricultural equipment, construction machinery, and utility vehicles, these single stage vane pumps applications deliver proven reliability.

agricultural equipment
construction machinery
utility vehicles

Important: Verify pump model WF820223 matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.

Product Selection Guide

These FluiDyne V20 Series hydraulic vane pumps are all direct Vickers replacements, sharing the same SAE ‘A’ 2-bolt flange mounting, similar shaft sizing, and right-hand rotation. The key differences lie in their flow rates, displacement, pressure ratings, maximum speeds, port positions, and shaft configurations—each impacting their suitability for various hydraulic system demands.

?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.

Model Number	Flow Rate	Max Pressure	Displacement	Mounting
WF820223 (Current)	8.4 GPM	2500 PSI	26.6 cm³/r (1.62 in³/r)	2-Bolt Flange (SAE “A” size)
V201P13P39C11R – FluiDyne V20 Pump	13.5 GPM	2500 PSI	42.6 cm³/r (2.60 in³/r)	2-Bolt Flange (SAE “A” size)
V201P13P3A11R – FluiDyne V20 Pump	13.5 GPM	2500 PSI	42.6 cm³/r (2.60 in³/r)	2-Bolt Flange (SAE “A” size)
WF8202267	6.2 GPM	2500 PSI	19.5 cm³/r (1.19 in³/r)	2-Bolt Flange (SAE “A” size)
V201P8P10D11R – FluiDyne V20 Pump	8.4 GPM	2500 PSI	26.6 cm³/r (1.62 in³/r)	2-Bolt Flange (SAE “A” size)

Key Differences

Flow Rate & Displacement

Difference: Flow rates at 1200 RPM range from 6.2 GPM (WF8202267) to 13.5 GPM (WF820229, WF8202297), with corresponding displacements from 19.5 cm³/r (1.19 in³/r) up to 42.6 cm³/r (2.60 in³/r).

Selection Guide: Select higher-flow models (WF820229, WF8202297) for systems with larger actuators or higher demand; choose lower-flow (WF8202267) for precision or lower volume needs.

Maximum Pressure Rating

Difference: WF8202297 lists a max pressure of 2200 PSI, while the others are rated up to 2500 PSI.

Selection Guide: For applications requiring full 2500 PSI operation, avoid WF8202297 and select WF820223, WF820229, WF8202267, or WF820228 (see pumps with integral valves for more options).

Maximum Speed

Difference: WF8202267 is rated to 3000 RPM, WF820223 and WF820228 to 2800 RPM, others to 2400 RPM.

Selection Guide: If your system requires higher pump speeds, choose WF8202267 or WF820223/WF820228.

Port Position

Difference: WF820223: 90° counter-clockwise from inlet; WF8202297: inline (0°); WF820229 and WF8202267: opposite from inlet (180°); WF820228: opposite from inlet (180°).

Selection Guide: Choose port orientation to match piping layout—inline (WF8202297) for direct runs, 90° (WF820223) or 180° (WF820229, WF8202267, WF820228) for space or routing needs.

Shaft Configuration

Difference: WF820223 and WF820228 have a 3/4″ straight shaft with key (2.66″ extension); others have 1.75″ extension or special shaft codes.

Selection Guide: Match shaft length and type to your coupling or drive requirements; use special shaft codes only if specified by your equipment.

Quick Selection Guide

If you need: Highest flow rate at 1200 RPM (13.5 GPM)

Choose: WF820229 or WF8202297

Because: Both models offer 13.5 GPM, ideal for high-demand systems.

If you need: Lower flow and precise control

Choose: WF8202267

Because: At 6.2 GPM and 1.19 in³/r displacement, best for small actuators or low-flow circuits.

If you need: Standard 8 GPM with 90° port position

Choose: WF820223

Because: Optimized for installations needing a 90° port from the inlet.

If you need: Standard 8 GPM with 180° port position

Choose: WF820228

Because: Same flow as WF820223 but with ports opposite the inlet for alternative piping layouts.

If you need: Operation at up to 3000 RPM

Choose: WF8202267

Because: Rated for the highest speed among these models.

Compatibility: All models are 100% interchangeable with Vickers V20 Series vane pumps, feature SAE ‘A’ 2-bolt flange mounting, and G1″/G1/2″ BSPP straight thread ports for simplified installation and retrofitting.

For detailed selection or cross-referencing help, see our Vickers replacement pumps resource page or contact Northern Hydraulics at (800) 823-4937, Mon-Fri, 7 AM – 5 PM MST. Volume pricing starts at 4 units. All pumps ship same-day when in stock and include a 12-month manufacturer warranty. Browse our single stage vane pumps for additional options.

Purchasing Information

Availability & Delivery

Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.

For current availability on WF820223, call (800) 823-4937.

Warranty & Protection

12-month warranty covers manufacturing defects
30-day return window for unopened units
Free technical verification before ordering
Each pump pressure tested before shipment

Ordering Options

Order online for immediate processing. Phone orders welcome at (800) 823-4937.

Net 30 terms available for approved accounts.

Volume pricing available on orders of 4 or more units.

Support & Documentation

Installation guide included with every shipment
Technical drawings and specifications available
Cross-reference guides for common brands
Phone support: Monday-Friday, 7 AM – 5 PM MST

Questions? Call our specialists: (800) 823-4937

SKU: WF820223

Fluidyne V20 WF820223 Vane Pump | Replacement for Vickers/Eaton V201P8P1B11R 2.7 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Name: Fluidyne V20 WF820223 Vane Pump | Replacement for Vickers/Eaton V201P8P1B11R 2.7 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft
Brand: Northern Hydraulics Inc.
SKU: WF820223
Price: 299.2 USD
Availability: InStock