Home » Hydraulics Shop » Hydraulic Pumps » Hydraulic Vane Pumps » Single Stage Vane Pumps » Fluidyne V20 WF8202727 Vane Pump | Replacement for Vickers/Eaton V201P13P62A11L 4.3 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Fluidyne V20 WF8202727 Vane Pump | Replacement for Vickers/Eaton V201P13P62A11L 4.3 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft

Fluidyne V20 WF8202727 Vane Pump | Replacement for Vickers/Eaton V201P13P62A11L 4.3 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft - Image 2

Specifications

Weight	18 lbs
Pump Mounting Flange	2-Bolt Flange (SAE "A" size)
Manufacturer	Fluidyne Fluid Power
Pumps Drive Shaft	3/4" Straight Shaft with Key (1.75" extension)
Pumps Rotation	Left-Hand (Counter-Clockwise)
Pumps Max Pressure	2500 psi
Pumps Rated Speed	1200 RPM
Pumps Max Speed	2600 RPM
Pumps Displacement	42.6 cm³/r (2.60 in³/r)
Pumps Ports In	G1" BSPP Straight Thread
Pumps Ports Out	G1/2" BSPP Straight Thread

Product Selection Guide

These FluiDyne V20 Series single stage vane pump models vary primarily by flow rate, displacement, shaft type, port orientation, and rotation direction. All are direct Vickers replacement pumps, SAE J744 compliant, and 100% interchangeable for straightforward drop-in installation. Key selection factors include required flow, system rotation, port alignment, and shaft compatibility with your drive coupling.

?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.

Model Number	Flow Rate	Max Pressure	Displacement	Mounting
WF8202727 (Current)	13.5 GPM	2500 PSI	42.6 cm³/r (2.60 in³/r)	2-Bolt Flange (SAE “A” size)
WF8202700	13.5 GPM	2500 PSI	42.6 cm³/r (2.60 in³/r)	2-Bolt Flange (SAE “A” size)
WF8202721	9.4 GPM	2500 PSI	29.7 cm³/r (1.81 in³/r)	2-Bolt Flange (SAE “A” size)
WF8202701	5.7 GPM	2500 PSI	18.0 cm³/r (1.10 in³/r)	2-Bolt Flange (SAE “A” size)
WF820274	11.5 GPM	2500 PSI	36.3 cm³/r (2.22 in³/r)	2-Bolt Flange (SAE “A” size)

Key Differences

Flow Rate & Displacement

Difference: WF8202701 delivers the lowest flow (5.7 GPM at 1.10 in³/rev), WF8202721 is moderate (9.4 GPM at 1.81 in³/rev), WF820274 offers 11.5 GPM (2.22 in³/rev), and WF8202727/WF8202700 deliver the highest (13.5 GPM at 2.60 in³/rev); see also V201P13P39C11R – FluiDyne V20 Pump for similar high-flow applications.

Selection Guide: Select the lowest displacement (WF8202701) for precise low-flow circuits, and the highest (WF8202727 or WF8202700) for systems demanding up to 13.5 GPM at 1200 RPM.

Rotation Direction

Difference: WF8202727, WF8202721, WF8202701, and WF820274 are Left-Hand (Counter-Clockwise); WF8202700 is Right-Hand (Clockwise).

Selection Guide: Choose rotation to match your prime mover—right-hand for standard engine drive, left-hand for reverse rotation setups.

Shaft Type & Extension

Difference: Shafts include 9- or 11-tooth splined (WF8202727, WF8202721, WF820274) and 3/4″ straight keyed (WF8202700, WF8202701, others), with extensions from 1.25″ to 2.66″.

Selection Guide: Splined shafts suit high-torque, vibration-resistant applications; straight keyed shafts offer broad coupling compatibility. For specialized needs, view our pumps with integral valves. Check extension length for alignment.

Port Position

Difference: Port positions vary: ‘Opposite from inlet’ (180°) in WF8202727, WF8202721, WF8202701; ‘Inline with inlet’ (0°) in WF8202700, WF820274.

Selection Guide: Choose port position to best fit your plumbing—’inline’ for straight runs, ‘opposite’ for layouts needing a 180° turn. For further guidance on application fit, consult our V201P13P3A11R – FluiDyne V20 Pump application guide.

Port Size/Thread Type

Difference: NPT thread (WF8202727, WF8202700, WF8202721, WF8202701); WF820274 uses straight thread (SAE O-ring). All provide G1″/G1/2″ BSPP straight thread options.

Selection Guide: Match port threading to your existing system to avoid adapters—choose BSPP for metric/fine-thread plumbing.

Maximum Speed

Difference: WF8202701 supports the highest max speed (3000 RPM); others range from 2400 to 2800 RPM.

Selection Guide: Select WF8202701 if your application requires higher pump speeds.

Quick Selection Guide

If you need: Highest flow at 1200 RPM (13.5 GPM) with left-hand (CCW) rotation and splined shaft

Choose: WF8202727

Because: Ideal for high-capacity, counter-clockwise driven systems needing robust spline coupling.

If you need: Highest flow at 1200 RPM (13.5 GPM) with right-hand (CW) rotation and straight keyed shaft

Choose: WF8202700

Because: Best fit for standard clockwise drive setups with keyed shaft compatibility.

If you need: Moderate flow (11.5 GPM) with left-hand rotation and inline ports

Choose: WF820274

Because: Optimal for systems requiring 11 GPM and straight-through porting, with a splined shaft for durability.

If you need: Lower flow, higher pressure, or faster speed (up to 3000 RPM)

Choose: WF8202701

Because: Suited for smaller actuators, pilot circuits, or high-speed drives.

If you need: Mid-range flow (9.4 GPM) with left-hand rotation

Choose: WF8202721

Because: Balances moderate flow/pressure for general industrial circuits.

Compatibility: All models feature SAE ‘A’ 2-bolt flange mounting and G1″/G1/2″ BSPP straight thread ports for direct replacement of Vickers V20 series pumps. 100% interchangeability ensures seamless swap-in for most systems.

For application-specific guidance, call (800) 823-4937 Monday-Friday, 7 AM – 5 PM MST or explore our full range of hydraulic pumps for additional options. Volume pricing starts at 4 units; all pumps include a 12-month manufacturer warranty and same-day shipping on in-stock items.

Compatibility & Applications

Direct Replacement Information

Fluidyne WF8202727 provides exact replacement for Vickers WF8202727 applications in systems requiring 42.6 cm³/r (2.60 in³/r) displacement and 2500 PSI max pressure. All mounting and port dimensions are fully compatible, ensuring 100% interchangeability..

Mounting Pattern: SAE ‘A’ 2-bolt
Inlet Port: G1″ BSPP
Outlet Port: G1/2″ BSPP

Common Applications

Commonly used in industrial machinery, material handling, production equipment. See our extensive range of single stage vane pumps for similar applications.

industrial machinery
material handling
production equipment

Important: Verify pump model WF8202727 matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.

Purchasing Information

Availability & Delivery

Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.

For current availability on WF8202727, call (800) 823-4937.

Warranty & Protection

12-month warranty covers manufacturing defects
30-day return window for unopened units
Free technical verification before ordering
Each pump pressure tested before shipment

Ordering Options

Order online for immediate processing. Phone orders welcome at (800) 823-4937.

Net 30 terms available for approved accounts.

Volume pricing available on orders of 4 or more units.

Support & Documentation

Installation guide included with every shipment
Technical drawings and specifications available (see all Vickers replacement pumps for full documentation)
Cross-reference guides for common brands
Phone support: Monday-Friday, 7 AM – 5 PM MST

Questions? Call our specialists: (800) 823-4937

SKU: WF8202727

Fluidyne V20 WF8202727 Vane Pump | Replacement for Vickers/Eaton V201P13P62A11L 4.3 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Name: Fluidyne V20 WF8202727 Vane Pump | Replacement for Vickers/Eaton V201P13P62A11L 4.3 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft
Brand: Northern Hydraulics Inc.
SKU: WF8202727
Price: 299.2 USD
Availability: InStock