(800) 823-4937
sales@northernhydraulics.net
| Weight | 18.0 lbs |
|---|---|
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key (1.75" extension) |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 3400 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Product Selection Guide
These FluiDyne V20 Series vane pumps are all direct Vickers replacements, sharing SAE ‘A’ 2-bolt flange mounting and similar port sizes. Key differences lie in flow rate, displacement, rotation direction, port orientation, and shaft configuration—each affecting suitability for single stage vane pumps in specific hydraulic system requirements.
?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.
| Model Number | Flow Rate | Max Pressure | Displacement | Mounting |
|---|---|---|---|---|
| WF820414 (Current) | 6.2 GPM | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| V201P5P18C11R – FluiDyne V20 Pump (18.0 cm³/r (1.10 in³/r)) | 6.2 GPM | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF820416 | 9.4 GPM | 2500 PSI | 29.7 cm³/r (1.81 in³/r) | 2-Bolt Flange (SAE “A” size) |
| V201P13P39C11R – FluiDyne V20 Pump (42.6 cm³/r (2.60 in³/r)) | 13.5 GPM | 2500 PSI | 42.6 cm³/r (2.60 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF820410 | 9.4 GPM | 2500 PSI | 29.7 cm³/r (1.81 in³/r) | 2-Bolt Flange (SAE “A” size) |
Key Differences
Flow Rate & Displacement
Difference: WF820414 delivers 6.2 GPM (1.19 in³/rev), WF820413 7 GPM (1.39 in³/rev), WF820416 and WF820410 both 9.4 GPM (1.81 in³/rev), and WF820418 13.5 GPM (2.60 in³/rev).
Selection Guide: Choose higher displacement models (WF820418) for larger actuators or faster cycle times; select lower displacement (WF820414) for precision or lower volume needs.
Rotation Direction
Difference: WF820414, WF820413, WF820418, and WF820410 are right-hand (clockwise), while WF820416 is left-hand (counter-clockwise).
Selection Guide: Match the pump’s rotation to your prime mover; WF820416 is required for CCW-driven systems.
Port Position
Difference: WF820414 & WF820416: 90° clockwise from inlet, WF820413 & WF820410: inline with inlet (0°), WF820418: 180° (opposite inlet).
Selection Guide: Choose port orientation to simplify plumbing—inline for straight connections, 90° for side exits, 180° for opposite-side routing. For advanced configurations, explore our pumps with integral valves.
Max Pressure & Speed
Difference: All except WF820418 are rated for 2500 PSI; WF820418 is 2200 PSI. Max speed ranges from 2400 to 3400 RPM.
Selection Guide: Select higher pressure models for demanding circuits; WF820414 supports the highest RPM (3400) for high-speed applications.
Shaft Configuration
Difference: WF820414, WF820416: 3/4″ straight shaft with key (1.75″ extension); WF820410: special shaft (Code 15); others standard 3/4″ straight key.
Selection Guide: Standard shafts fit most couplings; verify if your application needs the special shaft as on WF820410.
Quick Selection Guide
If you need: Compact, low-flow solution with highest speed capability
Choose: WF820414
Because: Delivers 6.2 GPM at up to 3400 RPM, ideal for smaller or faster cycling systems.
If you need: Slightly higher flow without increasing displacement much
Choose: WF820413
Because: Offers a small bump in flow and displacement with similar mounting and shaft setup.
If you need: Mid-range flow with left-hand rotation
Choose: WF820416
Because: Only model here with CCW rotation, 9.4 GPM, and 90° port orientation.
If you need: Mid-range flow, right-hand rotation, special shaft
Choose: WF820410
Because: 9.4 GPM, standard pressure, and a special shaft for unique drive requirements.
If you need: Maximum flow output
Choose: WF820418
Because: Delivers 13.5 GPM, best for high-demand circuits, but note the lower max pressure (2200 PSI) and 2400 RPM speed limit.
Compatibility: All models are 100% interchangeable with Vickers replacement pumps, feature SAE ‘A’ 2-bolt flange mounting, and G1″/G1/2″ BSPP straight thread ports. Ideal for direct drop-in replacement in existing systems.
For pump selection, cross-reference, and application engineering, contact Northern Hydraulics technical team at (800) 823-4937, Mon-Fri, 7 AM – 5 PM MST, or see our single stage vane pumps for additional selection guidance.
Purchasing Information
Availability & Delivery
Most hydraulic pumps ship within 1-2 business days. For a full selection of hydraulic pumps, browse our online catalog. Made-to-order items typically require 5-7 business days.
For current availability on WF820414, call (800) 823-4937.
Warranty & Protection
- 12-month warranty covers manufacturing defects
- 30-day return window for unopened units
- Free technical verification before ordering
- Each pump pressure tested before shipment
Ordering Options
Order online for immediate processing. Phone orders welcome at (800) 823-4937.
Net 30 terms available for approved accounts.
Volume pricing available on orders of 4 or more units.
Support & Documentation
- Installation guide included with every shipment (see our vane pumps documentation specifications for reference)
- Technical drawings and specifications available
- Cross-reference guides for common brands (find more on our Vickers replacement pumps specifications page)
- Phone support: Monday-Friday, 7 AM – 5 PM MST
Questions? Call our specialists: (800) 823-4937
Compatibility & Applications
Direct Replacement Information
As a Vickers WF820414 replacement, this Fluidyne pump delivers reliable hydraulic performance in systems requiring 19.5 cm³/r (1.19 in³/r) displacement and up to 2500 PSI. Designed for direct interchangeability, it fits seamlessly where Vickers V20 series models are specified..
- Mounting Pattern: SAE ‘A’ 2-bolt
- Inlet Port: G1″ BSPP
- Outlet Port: G1/2″ BSPP
Common Applications
Commonly used in lifting equipment, conveyor systems, processing machinery, and other single stage vane pump applications.
- lifting equipment
- conveyor systems
- processing machinery
Important: Verify pump model WF820414 matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.
Fluidyne V20 WF820414 Vane Pump | Replacement for Vickers/Eaton V201P6P1D11R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$299.20
In stock
No sales tax
Expected delivery Sep 17 - Sep 21
There are no reviews yet.