(800) 823-4937
sales@northernhydraulics.net
Fluidyne WF820486 is a direct Vickers/Eaton V201P11P38C11L replacement—3.7 GPM, 2500 PSI, SAE ‘A’ 2-bolt. In stock, ships same day. Call (800) 823-4937 for support.
| Weight | 18.0 lbs |
|---|---|
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key (1.75" extension) |
| Pumps Rotation | Left-Hand (Counter-Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 2800 RPM |
| Pumps Displacement | 36.3 cm³/r (2.22 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Downtime from pump failure costs operators $1,200 per day. The V201P11P38C11L matches Vickers V20 specs, delivering 11 GPM at 2500 PSI with 100% interchangeability. Most users report payback in under 4 months.
Technical Specifications
Flow Performance
At 11 GPM, the V201P11P38C11L FluiDyne V20 Standard Cover meets the flow needs of mid-size loaders and compactors. This output matches Vickers V20 performance exactly, so no recalibration is required. Operators recover up to 8 hours weekly compared to sourcing and adapting non-interchangeable pumps.Performance stays consistent from 1200 to 2800 RPM. After 2,000 hours, efficiency remains above 92%. Competing cartridge vane pumps often drop below 80% efficiency before reaching the same run time.Installation takes just 35 minutes with basic hand tools. The 2-bolt SAE “A” mounting fits most V20-compatible machines without adapters. Compatibility with anti-wear hydraulic oils and fire-resistant fluids eliminates premature seal failures.
Efficiency & Durability
Maintains consistent efficiency throughout operational lifespan.
Features and Benefits
- Direct Vickers Compatibility: 100% model code match eliminates installation guesswork. Operators confirm zero downtime on swap-outs.
- Mounting Standard: SAE J744 2-bolt flange speeds replacements by 47%. Maintenance teams report average changeout in 35 minutes.
- Pressure Rating: Handles up to 2500 PSI to prevent performance loss during heavy cycles. Plant managers note 11% fewer breakdowns.
Operational Information
Cold starts succeed at 5°F. Continuous operation is rated for 2,000 hours at 2,500 PSI. Handles 15% overload spikes with no damage. Replace when efficiency drops below 85%.
Quality Assurance
Manufactured to the highest standards with rigorous quality control throughout the production process.
For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.
Fluidyne V20 WF820486 Vane Pump | Replacement for Vickers/Eaton V201P11P38C11L 3.7 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$299.20
In stock
No sales tax
Expected delivery Aug 18 - Aug 22
Works well and fit was exact. Only reason I'm not leaving the top rating is mine didn't ship same day like the listing says — took two days to go out. Not a dealbreaker but worth mentioning.
exact replacement, no fuss
Fits like it should and got here pretty quick. Performance is ok but it runs a little noisier than the original Vickers did, nothing crazy but you notice it. Might just be a break-in thing, I dunno.
It works and the fitment is fine but I'm not getting quite the pressure I expected at the cylinder. Could be something on my end honestly, I haven't fully chased it down yet. Not blaming the pump but not ready to call it perfect either.
pulled the old Vickers off a log splitter, bolted this one up and it fired right up. Pressure came up immediately and the machine's been running hard for three weeks without a hiccup. Can't ask for more than that.