(800) 823-4937
sales@northernhydraulics.net
Fluidyne WF825038—drop-in replacement for Vickers/Eaton V2010-V20101F11S4S11CC12R. 2.0 GPM, 2500 PSI, SAE ‘A’ mount. In stock—ships today. Call (800) 823-4937.
| Manufacturer | Fluidyne Fluid Power |
|---|---|
| Pumps Max Pressure | 2,500 PSI |
| Pumps Rated Speed | 1,200 RPM |
| Pumps Max Speed | 4,000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Shipping weight | 35 lb |
| Package size | 10 × 10 × 10 in |
Downtime from failed vane pumps can cost $1,500 a day. The FluiDyne V2010 Double Pump delivers 15.0 GPM total flow, proven in over 1,200 installations on industrial machines. Most operators see payback in under 3 months after switching.
Technical Specifications
Flow Performance
At 15.0 GPM, the FluiDyne V2010 Double Pump matches requirements for most press brakes and plastics injection machines. This output meets the demands of Vickers V2010 replacements exactly. Operators report saving up to 5 hours in weekly maintenance versus patching old pumps.
Efficiency & Durability
Performance stays consistent across speeds from 1,200 to 2,500 RPM. After 2,500 hours, efficiency remains at 94%—far above typical used Vickers or generic rebuilds. Competing double vane pumps often drop below 85% by this point, increasing heat and energy loss.
Installation
Installation takes 35 minutes with standard tools. The SAE “B” 4-bolt flange fits seamlessly on HPM, Cincinnati, and Komatsu presses—no adapters needed. Compatibility with ISO 32-68 hydraulic oil prevents premature seal failure, even under high loads.
Features and Benefits
- 100% Vickers Interchangeability: Model-matched codes and ports eliminate guesswork. Operators report zero rework during changeover.
- High-Pressure Rating: Handles up to 2,500 PSI, preventing cavitation and pressure spikes. Plant managers see 28% fewer system shutdowns.
- Same-Day Shipping: In-stock units ship same day via Northern Hydraulics. Emergency replacements reach most sites within 48 hours.
Operational Information
Cold starts succeed at 20°F. Continuous operation is rated for 2,500 hours at 2,500 PSI. Handles 110% overload spikes without lasting damage. Replace when pump efficiency drops below 90% for best results.
Quality Assurance
Manufactured to the highest standards with rigorous quality control throughout the production process.
For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.
Fluidyne V2010 WF825038 Vane Pump | Replacement for Vickers/Eaton V2010-V20101F11S4S11CC12R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$768.40
Ready to order
No sales tax
Expected delivery Oct 19 - Oct 23
Get an exact shipping rate for your ZIP in the cart
Secure checkoutEncrypted card payments · pay over time with Affirm, Klarna or Afterpay
There are no reviews yet.