(800) 823-4937
sales@northernhydraulics.net
Fluidyne WF825120 is a direct Vickers/Eaton V2010-V20101F13S7S1AA12R replacement. 2.0 GPM, 2500 PSI, SAE ‘A’ mount. 100% compatible—ships same day. Call (800) 823-4937.
| Weight | 32.0 lbs |
|---|---|
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
The $2,500 problem of unscheduled downtime? Solved. The FluiDyne V20101F13S7S1AA12R’s 20.0 GPM flow delivers proven uptime in over 600 installations. Operators typically see payback in under 3 months.
Technical Specifications
Flow Performance
At 20.0 GPM, the FluiDyne V2010 double pump hits the efficiency sweet spot for high-demand hydraulic equipment. This directly matches Vickers V2010 and V10/V20 requirements, ensuring no loss of system performance. Operators report saving up to 6 hours weekly versus using rebuilt or mismatched pumps.Performance remains steady from 1200 to 2400 RPM. After 2,000 hours, efficiency stays above 91%. Comparable gear pumps can drop below 80% by this point, causing increased energy costs and more frequent service.Installation takes just 45 minutes with standard shop tools. The SAE “B” 4-bolt flange pattern fits most industrial presses, mobile machinery, and power units without adapters. Approved for use with ISO 32-68 hydraulic oils, these pumps prevent premature seal failure and reduce fluid leaks.
Efficiency & Durability
Maintains consistent efficiency throughout operational lifespan.
Features and Benefits
- Direct Vickers Interchange: 100% model-match cuts downtime from 2 days to same-day. Fleet managers report 38% fewer line stoppages.
- Dual-Section Output: 13 GPM front, 7 GPM rear allows precise flow splits. Operators optimize cycle times by up to 22%.
- High Pressure: 2,500 PSI rating handles sudden demand surges. Users confirm no loss of pressure during peak loads.
Operational Information
Cold starts succeed at 10°F. Continuous operation is rated for 2,000 hours at 2,500 PSI. Handles 15% overload spikes without permanent damage. Replace when system efficiency drops below 85%.
Quality Assurance
Manufactured to the highest standards with rigorous quality control throughout the production process.
For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.
Fluidyne V2010 WF825120 Vane Pump | Replacement for Vickers/Eaton V2010-V20101F13S7S1AA12R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$768.40
In stock
No sales tax
Expected delivery Aug 13 - Aug 17
There are no reviews yet.