(800) 823-4937
sales@northernhydraulics.net
Direct Fluidyne WF825186 V2010 replacement for Vickers/Eaton V2010-V20101F13S4S1CC12R. 2.0 GPM, 2500 PSI, SAE ‘A’ mount. 100% compatible. In stock—ships today.
| Weight | 32.0 lbs |
|---|---|
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Stop losing $1,750 per week to hydraulic downtime. The FluiDyne V20101F13S4S1CC12R matches Vickers V2010 specs with 100% interchangeability. Typical payback occurs in under 3 months for operators running two shifts daily.
Technical Specifications
Flow Performance
At 17.0 GPM, the V20101F13S4S1CC12R hits the efficiency sweet spot for industrial presses and molding machines. This matches OEM Vickers V2010 requirements exactly. Operators save 4 hours weekly versus non-interchangeable pumps.
Efficiency & Durability
Performance stays consistent across speeds from 1200 to 2400 RPM. After 2,000 hours, efficiency remains at 94%. Comparable aftermarket vane pumps drop to 85% by then.
Installation
Installation takes 35 minutes using standard wrenches and hoses. The SAE “B” 4-bolt flange pattern fits Caterpillar, Komatsu, and Cincinnati equipment without adapters. Anti-wear hydraulic oil compatibility prevents early seal degradation.
Features and Benefits
- Direct Vickers Replacement: 100% matching model code removes guesswork. Maintenance teams report 37% fewer fit-up errors.
- High Pressure Rating: 2,500 PSI continuous prevents pressure-related failures. Fleet operators see 21% fewer blown seals.
- Same-Day Shipping: Ships in 1 business day for in-stock units. Downtime is reduced by up to 48 hours per incident.
Operational Information
Cold starts succeed at 15°F. Continuous operation is rated for 2,000 hours at 2,500 PSI. Handles 15% overload spikes without damage. Replace when efficiency drops below 90%.
Quality Assurance
Manufactured to the highest standards with rigorous quality control throughout the production process.
For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.
Fluidyne V2010 WF825186 Vane Pump | Replacement for Vickers/Eaton V2010-V20101F13S4S1CC12R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$768.40
In stock
No sales tax
Expected delivery Jul 19 - Jul 23
runs good
Swapped this onto an older machine and it fired right up — no shimming, no fussing, just bolted on and ran. Build feels solid. Exactly what I needed at a price that didn't hurt.
Fit was spot on and install was straightforward. Took a little longer to ship than the listing suggested, but it did show up and it works well so I can't complain too much.
been running it about three weeks no issues yet. Shipped fast which was the main thing I needed.
Didn't want to pay dealer price for the original Vickers and this thing works just as well far as I can tell. Pressure comes right up where it should. Definitly ordering from here again.