(800) 823-4937
sales@northernhydraulics.net
Fluidyne WF825589—direct replacement for Vickers/Eaton V2010-V20101F7S3R11CC12L. 2.0 GPM, 2500 PSI, 3/4″ keyed shaft. 100% compatible. In stock, ships today.
| Weight | 32.0 lbs |
|---|---|
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Left-Hand (Counter-Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
The $2,500 weekly cost of hydraulic downtime? Solved. The FluiDyne V20101F7S3R11CC12L’s 10.0 GPM total flow and direct Vickers compatibility keep machines running. Payback in under 3 months is typical for field operators.
Technical Specifications
Flow Performance
At 10.0 GPM, the V20101F7S3R11CC12L hits the efficiency sweet spot for loaders and industrial presses. This matches Vickers V2010 double pump requirements exactly. Operators save 5 hours weekly versus waiting for machine-specific replacements.
Efficiency & Durability
Performance stays consistent across 2,500 PSI system pressures. After 2,000 hours, efficiency remains at 96%. Comparable aftermarket pumps can drop to 87% by the same point, increasing energy costs and heat.
Installation
Installation takes 40 minutes using standard tools. The SAE “B” 4-bolt flange pattern fits Vickers-equipped presses, balers, and power units without adapters. Anti-wear hydraulic oil compatibility prevents seal failure and extends service intervals.
Features and Benefits
- Direct Vickers Interchangeability: 100% matching mount, port, and shaft specs eliminate downtime for retrofits. Maintenance teams report 92% first-fit success.
- Pressure Rating: 2,500 PSI supports high-force cycles. Machine operators see 30% longer intervals between pump replacements.
- Same-Day Shipping: In-stock units ship same day from Northern Hydraulics. This reduces average unplanned downtime by 2 days per incident.
Operational Information
Cold starts succeed at 0°F. Continuous operation is rated for 2,000 hours at 2,500 PSI. Handles 15% overload spikes without damage. Replace when efficiency drops below 90%.
Quality Assurance
Manufactured to the highest standards with rigorous quality control throughout the production process.
For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.
Fluidyne V2010 WF825589 Vane Pump | Replacement for Vickers/Eaton V2010-V20101F7S3R11CC12L 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$768.40
In stock
No sales tax
Expected delivery Sep 09 - Sep 13
Pump arrived and looked fine but started leaking around the housing after about a week of use. Wasn't running it hard either. Had to pull it back off and deal with the mess — expected better quality for the price, honestly.
fit perfect
Installed it last week and it's working fine. Took maybe 20 minutes to swap out. Only reason I'm not giving it full marks is I'd like to see how it holds up over a longer season before I'm fully sold on it.
Ordered this to replace a Vickers unit that finally gave out on a customer's machine. Fit was exact and the price was a lot better than going through the OEM dealer. Will order again.
Had to wait an extra day past the estimated ship date but once it arrived the thing bolted right up and runs quiet. No issues with performance so far, builds pressure like it should.