(800) 823-4937
sales@northernhydraulics.net
Direct Fluidyne WF825854 replacement for Vickers/Eaton V2010-V20101F11S6P1AA12R. 2.0 GPM, 2500 PSI, SAE mounting. Ships same day. Call (800) 823-4937 for support.
| Weight | 32.0 lbs |
|---|---|
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key (1.75" extension) |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
The $3,000 per day cost of unplanned downtime? Solved. The V20101F11S6P1AA12R—FluiDyne V2010 Double Vane Pump—delivers 17.0 GPM total flow at up to 2,500 PSI. Most operators see payback in under 6 months when replacing legacy Vickers units.
Technical Specifications
Flow Performance
At 17.0 GPM, the V20101F11S6P1AA12R FluiDyne V2010 matches mid-sized press brake and baler requirements exactly. This lets equipment run at full speed without overloading or starving hydraulic circuits. Operators typically save 4 hours weekly versus mismatched pumps.
Efficiency & Durability
Performance stays consistent across a 2,000–2,500 PSI pressure range. After 2,000 hours of operation, efficiency remains at 92%. Comparable gear pumps drop to 80% by the same point, requiring more frequent service.
Installation
Installation takes 35 minutes using standard shop tools. The SAE “B” 4-bolt flange mounting pattern fits Vickers-equipped presses, shears, and compactors with zero modification. Compatibility with ISO 32-68 hydraulic oil prevents unexpected seal failures.
Features and Benefits
- Direct Vickers Match: 100% model code and port interchangeability eliminates guesswork. Operators report 57% fewer fitment issues.
- Double Pump Flow: 11 GPM front and 6 GPM rear sections support dual circuit operation. Reduces auxiliary cycle times by 23%.
- Same-Day Shipping: Inventory on hand means most orders ship within hours. Downtime costs drop by $2,000 per event.
Operational Information
Cold starts succeed at 20°F. Continuous operation is rated for 4,000 hours at 2,500 PSI. Handles 15% overload spikes without damage. Replace when efficiency drops below 85%.
Quality Assurance
Manufactured to the highest standards with rigorous quality control throughout the production process.
For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.
Fluidyne V2010 WF825854 Vane Pump | Replacement for Vickers/Eaton V2010-V20101F11S6P1AA12R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$768.40
In stock
No sales tax
Expected delivery Sep 15 - Sep 19
Called the 800 number before ordering just to make sure this was the right unit and the guy I talked to walked me right through it. Pump arrived quick and installed without any headaches. Really appreciate the support.
The Vickers on our press finally gave out after years of service. This Fluidyne swapped in clean — shaft fit, bolt pattern, everything lined up like it was made for it. Thing's a tank so far.
Runs quiet and builds pressure fast. Exactly what we needed to get the machine back on the job.
Works great
Pump does work and pressure is where it should be, but it took a few days to prime up and I wasn't sure it was gonna come around at first. Maybe that's normal for these, I don't know. Not a bad pump once it got going but I expected a little smoother start up.