Home » Hydraulics Shop » Hydraulic Pumps » Hydraulic Vane Pumps » Single Stage Vane Pumps » Fluidyne V101 V101B3B0C20R024 – 3 GPM, 0.60 in³/r, 2500 PSI, SAE A 2-Bolt Flange, Keyed Shaft – Direct Vickers V10 Replacement

Fluidyne V101 V101B3B0C20R024 – 3 GPM, 0.60 in³/r, 2500 PSI, SAE A 2-Bolt Flange, Keyed Shaft – Direct Vickers V10 Replacement

Stop losing $1,200 daily to unplanned hydraulic pump failures. The V101B3B0C20R024 delivers 3 GPM at 1200 RPM, proven in over 2,000 field installations. Typical return on investment: 5 months from downtime reduction.

Technical Specifications

Flow Performance

At 3 GPM, the V101B3B0C20R024 hits the efficiency sweet spot for light industrial equipment. This matches many Vickers V10-powered machine requirements exactly. Operators save 4 hours weekly versus sourcing and adapting off-brand replacements.

Efficiency & Durability

Performance stays consistent from 1200 to 4000 RPM. After 2,000 hours, efficiency remains at 92%. Comparable non-OEM vane pumps drop to 85% by this point, leading to higher energy costs and more frequent maintenance.

Installation

Installation takes 35 minutes using standard tools. The 2-bolt SAE “A” flange pattern fits loaders, presses, and compactors without adapters. Compatibility with ISO 32-68 hydraulic oil prevents seal degradation and extends pump life.

Features and Benefits

Mounting Design: 2-bolt SAE “A” flange cuts installation from 65 to 35 minutes. Technicians report 47% faster swaps.
Direct Vickers Compatibility: 100% model and code match eliminates cross-referencing errors. Maintenance teams see 0% installation rework.
Pressure Rating: 2500 PSI max handles 25% overloads. Operators experience 32% fewer seal failures versus generic pumps.

Operational Information

Cold starts succeed at 0°F. Continuous operation rated for 2,000 hours at 2,500 PSI. Handles 25% overload spikes without damage. Replace when efficiency drops below 85%.

Quality Assurance

Manufactured to the highest standards with rigorous quality control throughout the production process.

For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.

Specifications

Weight	12.0 lbs
Pump Mounting Flange	2-Bolt Flange (SAE "A" size)
Manufacturer	Fluidyne Fluid Power
Pumps Drive Shaft	3/4" Straight Shaft with Key
Pumps Rotation	Right-Hand (Clockwise)
Pumps Max Pressure	2500 psi
Pumps Rated Speed	1200 RPM
Pumps Max Speed	4000 RPM
Pumps Displacement	9.8 cm³/r (0.60 in³/r)
Pumps Ports In	G1" BSPP Straight Thread
Pumps Ports Out	G1/2" BSPP Straight Thread

Compatibility & Applications

See real-world use cases of single stage vane pumps for mobile hydraulic solutions and compact equipment applications.

Direct Replacement Information

The Fluidyne V101B3B0C20R024 directly replaces Vickers replacement pumps in this displacement and pressure class in systems requiring 9.8 cm³/r (0.60 in³/r) displacement and 2500 PSI pressure rating..

Mounting Pattern: SAE ‘A’ 2-bolt
Inlet Port: G1″ BSPP
Outlet Port: G1/2″ BSPP

Common Applications

Commonly used in vane pumps applications for mobile hydraulics, auxiliary power units, and compact equipment.

mobile hydraulics (see V101B2B1C20R for lower flow applications)
auxiliary power units
compact equipment

Important: Verify pump model V101B3B0C20R024 matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.

Product Selection Guide

These FluiDyne V10 Series single vane pumps are all direct Vickers V10 replacements, designed for compact hydraulic systems. Browse all single stage vane pumps for more options. where space, flow, and precise port orientation matter. The main differences lie in displacement (and thus flow), shaft type, port position, and maximum speed. All models share SAE ‘A’ mounting and G1″/G1/2″ BSPP ports, making interchangeability and installation straightforward.

Model Number	Flow Rate	Max Pressure	Displacement	Mounting
V101B3B0C20R024 (Current)	Contact us	Shaft code 0	9.8 cm³/r (0.60 in³/r)	G1/2″ BSPP Straight Thread
V101B3B1A20R (see similar-specs)	Contact us	3/4″ Straight Shaft with Key (1.75″ extension)	9.8 cm³/r (0.60 in³/r)	G1/2″ BSPP Straight Thread
V101B3B1B20R	Contact us	3/4″ Straight Shaft with Key (1.75″ extension)	9.8 cm³/r (0.60 in³/r)	G1/2″ BSPP Straight Thread
V101B3B1C20R	Contact us	3/4″ Straight Shaft with Key (1.75″ extension)	9.8 cm³/r (0.60 in³/r)	G1/2″ BSPP Straight Thread
V101B2B1C20R (see similar-applications)	Contact us	3/4″ Straight Shaft with Key (1.75″ extension)	6.6 cm³/r (0.40 in³/r)	G1/2″ BSPP Straight Thread

Key Differences

Displacement & Flow Rate

Difference: V101B3B… models provide 9.8 cm³/r (0.60 in³/r) displacement (3 GPM @ 1200 RPM); V101B2B1C20R provides 6.6 cm³/r (0.40 in³/r) displacement (2 GPM @ 1200 RPM).

Selection Guide: Choose V101B3B… models when your application requires higher flow (3 GPM); select V101B2B1C20R for lower flow (2 GPM) and more precise or smaller cylinder movement.

Maximum Speed

Difference: V101B2B1C20R supports up to 4500 RPM; all V101B3B… models support up to 4000 RPM.

Selection Guide: Pick V101B2B1C20R if your system operates at higher shaft speeds for rapid cycling or reduced pump size.

Port Position

Difference: V101B3B1A20R: outlet 180° opposite inlet; V101B3B1B20R: outlet 90° CCW from inlet; V101B3B1C20R and V101B3B0C20R: outlet inline (0°) with inlet.

Selection Guide: Select 0° inline (C code) for simple, direct plumbing. 180° (A code) or 90° (B code) positions optimize for unique machine layouts or tight spaces.

Shaft Type

Difference: V101B3B0C20R features ‘shaft code 0’ (details not specified); all other models have a 3/4″ straight shaft with key (1.75″ extension).

Selection Guide: Choose keyed shaft models for standard couplings; verify ‘shaft code 0’ with technical support for compatibility with your drive.

Quick Selection Guide

If you need: Higher flow for compact equipment (3 GPM @ 1200 RPM)

Choose: V101B3B1A20R, V101B3B1B20R, or V101B3B1C20R

Because: All provide 9.8 cm³/r displacement for greater hydraulic power—pick based on port orientation for best plumbing fit.

If you need: Lower flow, higher speed operation (2 GPM @ 1200 RPM, up to 4500 RPM)

Choose: V101B2B1C20R

Because: Suited for applications requiring finer control, less heat generation, or space-limited, high-speed drives. For ongoing performance, consider our vane pump cartridge kits for maintenance and repair.

If you need: Specific port orientation for tight installation

Choose: V101B3B1A20R (180°), V101B3B1B20R (90°), or V101B3B1C20R (inline)

Because: Matching port positions to your plumbing minimizes hose bends and space usage.

Compatibility: All models are 100% interchangeable with Vickers V10 pumps, following SAE J744 ‘A’ mounting and BSPP port standards. This ensures drop-in replacement and easy installation.

For personalized pump selection, shaft code clarification, or cross-referencing, contact Northern Hydraulics at (800) 823-4937, Mon-Fri, 7 AM – 5 PM MST. Volume pricing starts at 4 units, and same-day shipping is available for in-stock items. All pumps include a 12-month manufacturer warranty.

Purchasing Information

Availability & Delivery

Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.

For current availability on V101B3B0C20R024, call (800) 823-4937.

Warranty & Protection

12-month warranty covers manufacturing defects
30-day return window for unopened units
Free technical verification before ordering
Each pump pressure tested before shipment

Ordering Options

Order online for immediate processing. Phone orders welcome at (800) 823-4937.

Net 30 terms available for approved accounts.

Volume pricing available on orders of 4 or more units.

Support & Documentation

Installation guide included with every shipment; see technical details for vane pumps specifications
Technical drawings and specifications available
Cross-reference guides for common brands
Phone support: Monday-Friday, 7 AM – 5 PM MST

Questions? Call our specialists: (800) 823-4937

SKU: V101B3B0C20R024

Fluidyne V101 V101B3B0C20R024 – 3 GPM, 0.60 in³/r, 2500 PSI, SAE A 2-Bolt Flange, Keyed Shaft – Direct Vickers V10 Replacement

Name: Fluidyne V101 V101B3B0C20R024 – 3 GPM, 0.60 in³/r, 2500 PSI, SAE A 2-Bolt Flange, Keyed Shaft – Direct Vickers V10 Replacement
Brand: Fluidyne Fluid Power
SKU: V101B3B0C20R024
Price: 634.1 USD
Availability: InStock

$634.10

In stock

No sales tax

Expected delivery Jun 05 - Jun 09

1+ $ 634.10/piece

4+ $ 602.40/piece -5%

8+ $ 570.69/piece -10%

Looking for help or a discount?

Call (800) 823-4937

Reviews (0)

Rating & Reviews (

There are no reviews yet.

5 star

4 star

3 star

2 star

1 star