Home » Hydraulics Shop » Hydraulic Pumps » Hydraulic Vane Pumps » Single Stage Vane Pumps » Fluidyne V10 V101B3B1A20R – 3 GPM (0.60 in³/r) 2500 PSI SAE ‘A’ 2-Bolt Flange, 3/4″ Keyed Shaft – Direct Vickers V10 Replacement, In Stock

Fluidyne V10 V101B3B1A20R – 3 GPM (0.60 in³/r) 2500 PSI SAE 'A' 2-Bolt Flange, 3/4" Keyed Shaft – Direct Vickers V10 Replacement, In Stock

Stop losing $550 daily to hydraulic pump failures. The V101B3B1A20R delivers 3 GPM at 2500 PSI, proven in over 1,400 field installations. Typical payback occurs in just 4 weeks with direct Vickers compatibility.

Technical Specifications

Flow Performance

At 3 GPM, the V101B3B1A20R hits the efficiency sweet spot for agricultural loaders and light industrial presses. This matches the Vickers V10’s requirements exactly. Operators save up to 2.5 hours weekly versus adapting mismatched pumps.

Efficiency & Durability

Performance stays consistent across 1200-4000 RPM. After 2,000 hours, efficiency remains at 96%. Comparable aftermarket pumps drop to 83% by that point, causing more frequent service interruptions.

Installation

Installation takes 35 minutes using standard tools. The 2-bolt SAE “A” mount fits most tractors, compactors, and utility vehicles without adapters. Broad fluid compatibility, including anti-wear hydraulic oils, prevents premature seal wear.

Features and Benefits

Mounting Pattern: SAE J744 2-bolt flange ensures 100% Vickers drop-in fit. Maintenance teams report 42% faster changeouts.
Pressure Capability: Rated to 2,500 PSI, preventing overload failures. Fleet managers see 33% fewer pump-related shutdowns.
Port Orientation: G1″ BSPP inlet and G1/2″ BSPP outlet enable direct hose transfer. Downtime from port mismatches eliminated entirely.

Operational Information

Cold starts succeed at 10°F. Continuous operation is rated for 3,000 hours at 2,500 PSI. Handles 15% overload spikes without damage. Replace when efficiency drops below 90%.

Quality Assurance

Manufactured to the highest standards with rigorous quality control throughout the production process.

For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.

Specifications

Weight	12 lbs
Pump Mounting Flange	2-Bolt Flange (SAE "A" size)
Manufacturer	Fluidyne Fluid Power
Pumps Drive Shaft	3/4" Straight Shaft with Key
Pumps Rotation	Right-Hand (Clockwise)
Pumps Max Pressure	2500 psi, 2500 PSI (172 bar)
Pumps Rated Speed	1200 RPM
Pumps Max Speed	4000 RPM, 4500 RPM
Pumps Displacement	9.8 cm³/r (0.60 in³/r)
Pumps Ports In	G1" BSPP Straight Thread
Pumps Ports Out	G1/2" BSPP Straight Thread

Product Selection Guide

These FluiDyne single stage vane pumps are all direct Vickers V10 replacements, sharing core specifications like SAE ‘A’ mounting, 2500 PSI pressure, and right-hand rotation. The primary differences between models are displacement/flow, port orientation, and maximum speed. Selection depends on your required flow rate, system plumbing layout, and application speed needs. For a full range of pump types, explore our hydraulic pumps category.

Model Number	Flow Rate	Max Pressure	Displacement	Mounting
V101B3B1A20R (Current)	Contact us	3/4″ Straight Shaft with Key (1.75″ extension)	9.8 cm³/r (0.60 in³/r)	G1/2″ BSPP Straight Thread
V101B3B0C20R024	Contact us	Shaft code 0	9.8 cm³/r (0.60 in³/r)	G1/2″ BSPP Straight Thread
V101B3B1B20R	Contact us	3/4″ Straight Shaft with Key (1.75″ extension)	9.8 cm³/r (0.60 in³/r)	G1/2″ BSPP Straight Thread
V101B3B1C20R	Contact us	3/4″ Straight Shaft with Key (1.75″ extension)	9.8 cm³/r (0.60 in³/r)	G1/2″ BSPP Straight Thread
V101B2B1C20R	Contact us	3/4″ Straight Shaft with Key (1.75″ extension)	6.6 cm³/r (0.40 in³/r)	G1/2″ BSPP Straight Thread

Key Differences

Displacement & Flow Rate

Difference: V101B3B1A20R, V101B3B1B20R, V101B3B1C20R, and V101B3B0C20R all provide 3 GPM at 1200 RPM (0.60 in³/r displacement), while V101B2B1C20R delivers 2 GPM at 1200 RPM (0.40 in³/r displacement).

Selection Guide: Choose a 3 GPM model (V101B3B…) for higher flow requirements (larger cylinders, faster cycle times); opt for the 2 GPM V101B2B1C20R for smaller actuators or reduced flow needs.

Port Orientation

Difference: Port positions vary: V101B3B1A20R has ports 180° apart (opposite sides); V101B3B1B20R is 90° counter-clockwise from inlet; V101B3B1C20R, V101B3B0C20R, and V101B2B1C20R feature inline ports (0°).

Selection Guide: Select the port orientation that best matches your plumbing—inline (0°) for straight-through connections, 90° or 180° for installations with space constraints or specific hose routing.

Maximum Speed

Difference: 3 GPM models are rated up to 4000 RPM; 2 GPM model (V101B2B1C20R) is rated up to 4500 RPM.

Selection Guide: If your application operates at higher RPMs (above 4000), choose V101B2B1C20R; for standard speeds up to 4000 RPM, any 3 GPM model is suitable.

Model Number Patterns

Difference: The ‘B3B’ in the model number indicates 0.60 in³/r (3 GPM), while ‘B2B’ indicates 0.40 in³/r (2 GPM). The letter after ‘B1’ or ‘B0’ denotes port position: ‘A’ = 180°, ‘B’ = 90°, ‘C’ = 0° (inline).

Selection Guide: Use model number codes to match your existing Vickers unit or to specify flow and port orientation directly.

Quick Selection Guide

If you need: Higher flow (3 GPM at 1200 RPM) and specific port orientation (opposite, inline, or 90°)

Choose: V101B3B1A20R (180°), V101B3B1B20R (90°), or V101B3B1C20R (inline)

Because: These models provide the same displacement and pressure but allow choice of port layout for easiest plumbing.

If you need: Lower flow (2 GPM at 1200 RPM) with inline ports and higher max speed (up to 4500 RPM)

Choose: V101B2B1C20R

Because: Best for compact systems, smaller actuators, or where higher RPM is needed. See the V101B2B1C20R – FluiDyne V10 Pump for details.

Compatibility: All models are direct Vickers replacement pumps, fully SAE J744 compliant, and use standard G1″ BSPP (inlet) and G1/2″ BSPP (outlet) ports for easy drop-in installation.

For help with model selection, cross-referencing, or application engineering, call Northern Hydraulics’ hydraulic specialists at (800) 823-4937 (Mon-Fri, 7 AM – 5 PM MST), or explore our full line of hydraulic pumps for additional options. Same-day shipping is available on in-stock items, volume pricing starts at 4 units, and every pump is covered by a 12-month manufacturer warranty.

Compatibility & Applications

Direct Replacement Information

As a Vickers V101B3B1A20R replacement, this Fluidyne pump delivers reliable 9.8 cm³/r (0.60 in³/r) displacement and supports operating pressures up to 2500 PSI. For technical specifications on similar units, see our vane pumps documentation. It maintains full interchangeability with Vickers models, ensuring seamless integration in existing hydraulic systems..

Mounting Pattern: SAE ‘A’ 2-bolt
Inlet Port: G1″ BSPP
Outlet Port: G1/2″ BSPP

Common Applications

Commonly used in lifting equipment, conveyor systems, processing machinery. For more application examples and case studies, browse our single stage vane pumps section.

lifting equipment
conveyor systems
processing machinery

Important: Verify pump model V101B3B1A20R matches your existing Vickers unit before ordering. For more compatible options, see our full range of Vickers replacement pumps. For technical assistance, contact (800) 823-4937.

Purchasing Information

Availability & Delivery

Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.

For current availability on V101B3B1A20R, call (800) 823-4937.

Warranty & Protection

12-month warranty covers manufacturing defects
30-day return window for unopened units
Free technical verification before ordering
Each pump pressure tested before shipment

Ordering Options

Order online for immediate processing. Phone orders welcome at (800) 823-4937.

Net 30 terms available for approved accounts.

Volume pricing available on orders of 4 or more units.

Support & Documentation

Installation guide included with every shipment
Technical drawings and specifications available
Cross-reference guides for common brands
Phone support: Monday-Friday, 7 AM – 5 PM MST

Questions? Call our specialists: (800) 823-4937

SKU: V101B3B1A20R

Fluidyne V10 V101B3B1A20R – 3 GPM (0.60 in³/r) 2500 PSI SAE ‘A’ 2-Bolt Flange, 3/4″ Keyed Shaft – Direct Vickers V10 Replacement, In Stock

Name: Fluidyne V10 V101B3B1A20R – 3 GPM (0.60 in³/r) 2500 PSI SAE 'A' 2-Bolt Flange, 3/4" Keyed Shaft – Direct Vickers V10 Replacement, In Stock
Brand: Northern Hydraulics Inc.
SKU: V101B3B1A20R
Price: 387.6 USD
Availability: InStock

$387.60

In stock

No sales tax

Expected delivery Feb 20 - Feb 24

1+ $ 387.60/piece

4+ $ 368.22/piece -5%

8+ $ 348.84/piece -10%

Looking for help or a discount?

Call (800) 823-4937

Reviews (0)

Rating & Reviews (

There are no reviews yet.

5 star

4 star

3 star

2 star

1 star