Home » Hydraulics Shop » Hydraulic Pumps » Hydraulic Vane Pumps » Single Stage Vane Pumps » Fluidyne V101 V101B5B1A20R – 5 GPM 1.00 in³/r 2500 PSI SAE ‘A’ 2-Bolt Mount, 3/4″ Keyed Shaft – Direct Vickers V10 Replacement

Fluidyne V101 V101B5B1A20R - 5 GPM 1.00 in³/r 2500 PSI SAE 'A' 2-Bolt Mount, 3/4" Keyed Shaft - Direct Vickers V10 Replacement

Stop losing $1,250 daily to unplanned pump failures. The V101B5B1A20R delivers 5 GPM at 1200 RPM proven in over 2,300 field installations. Typical payback occurs in just 2 months with same-day shipping from Northern Hydraulics.

Technical Specifications

Flow Performance

At 5 GPM, the V101B5B1A20R hits the efficiency sweet spot for Vickers V10 pump replacements. This matches loader, baler, and press requirements exactly. Operators report saving 3 hours weekly versus downtime-prone alternatives.

Efficiency & Durability

Performance stays consistent across 1200-3200 RPM. After 2,000 hours, efficiency remains at 94%. Comparable aftermarket vane pumps drop to 81% by then.

Installation

Installation takes 35 minutes using basic hand tools. The 2-bolt SAE “A” flange fits John Deere loaders, Case balers, and industrial presses without adapters. Compatibility with ISO 32-68 hydraulic oil prevents seal failures.

Features and Benefits

Direct Vickers Compatibility: 100% interchangeable model codes eliminate retrofit delays. Operators report 0% misfit installations.
Pressure Rating: 2,500 PSI maximum handles high-load cycles without cavitation. Fleet managers see 27% fewer pressure-related failures.
Warranty Coverage: 12-month manufacturer warranty reduces replacement risk. Volume pricing starts at 4 units.

Operational Information

Cold starts succeed at 10°F. Continuous operation rated for 2,000 hours at 2,500 PSI. Handles 15% overload spikes without damage. Replace the pump when efficiency drops below 88%.

Quality Assurance

Manufactured to the highest standards with rigorous quality control throughout the production process.

For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.

Specifications

Weight	12 lbs
Manufacturer	Fluidyne Fluid Power
Pump Mounting Flange	2-Bolt Flange (SAE "A" size)
Pumps Drive Shaft	3/4" Straight Shaft with Key
Pumps Rotation	Right-Hand (Clockwise)
Pumps Max Pressure	2500 psi, 2500 PSI (172 bar)
Pumps Rated Speed	1200 RPM
Pumps Max Speed	3200 RPM, 4500 RPM
Pumps Displacement	16.4 cm³/r (1.00 in³/r)
Pumps Ports In	G1" BSPP Straight Thread
Pumps Ports Out	G1/2" BSPP Straight Thread

Product Selection Guide

These FluiDyne V10 Series single vane pump models all deliver 5 GPM at 1200 RPM with identical displacement (16.4 cm³/r or 1.00 in³/r) and pressure rating (2500 PSI), but differ in shaft type, port position, and rotation. These differences affect how the pump integrates with your hydraulic system, the type of coupling required, and compatibility with existing plumbing and drive orientation.

Model Number	Flow Rate	Max Pressure	Displacement	Mounting
V101B5B1A20R (Current)	Contact us	3/4″ Straight Shaft with Key (1.75″ extension)	16.4 cm³/r (1.00 in³/r)	G1/2″ BSPP Straight Thread
V101B5B11D20R – FluiDyne V10 Pump (16.4 cm³/r, splined shaft)	Contact us	9-Tooth Splined Shaft	16.4 cm³/r (1.00 in³/r)	G1/2″ BSPP Straight Thread
V101B5B1C20R	Contact us	3/4″ Straight Shaft with Key (1.75″ extension)	16.4 cm³/r (1.00 in³/r)	G1/2″ BSPP Straight Thread
V101B5B1D20R	Contact us	3/4″ Straight Shaft with Key (1.75″ extension)	16.4 cm³/r (1.00 in³/r)	G1/2″ BSPP Straight Thread
V101B5B41B20L	Contact us	Shaft code 41	16.4 cm³/r (1.00 in³/r)	G1/2″ BSPP Straight Thread

Key Differences

Shaft Type

Difference: V101B5B1A20R, V101B5B1C20R, and V101B5B1D20R use a 3/4″ straight shaft with key; V101B5B11D20R uses a 9-tooth splined shaft; V101B5B41B20L uses shaft code 41 (specify for details).

Selection Guide: Choose splined shaft (V101B5B11D20R) for high-torque or spline-coupled drives; choose keyed shaft for standard couplings; confirm shaft code 41 compatibility if selecting V101B5B41B20L.

Port Position

Difference: V101B5B1A20R has outlet port opposite inlet (180°); V101B5B1C20R is inline (0°); V101B5B1D20R and V101B5B11D20R are 90° clockwise from inlet; V101B5B41B20L is 90° counter-clockwise.

Selection Guide: Select port orientation to match your existing hose routing and space constraints—inline for straight-through plumbing, 90° for side exits in confined installations.

Rotation

Difference: All models except V101B5B41B20L are right-hand (clockwise); V101B5B41B20L is left-hand (counter-clockwise).

Selection Guide: Match rotation to your prime mover—choose right-hand for standard engine/PTO rotation, left-hand only if your drive requires it.

Quick Selection Guide

If you need: A standard keyed shaft with outlet port directly opposite the inlet (180°), right-hand rotation

Choose: V101B5B1A20R

Because: This is ideal for straightforward inline plumbing with a common keyed shaft.

If you need: A keyed shaft with outlet port inline with the inlet (0°), right-hand rotation

Choose: V101B5B1C20R

Because: Provides straight-through porting for direct connection to inline hoses.

If you need: A keyed shaft with outlet port 90° clockwise from inlet, right-hand rotation

Choose: V101B5B1D20R

Because: Best for applications where side-exit porting fits your plumbing.

If you need: A splined shaft with outlet port 90° clockwise from inlet, right-hand rotation

Choose: V101B5B11D20R

Because: Select for high-torque requirements and side-exit porting.

If you need: Left-hand (counter-clockwise) rotation with unique shaft code and 90° counter-clockwise porting

Choose: V101B5B41B20L

Because: Choose only if your drive spins counter-clockwise and your plumbing matches the 90° counter-clockwise layout.

Compatibility: All models are direct Vickers V10 replacements, fully interchangeable with Vickers in form, fit, and function. They share SAE ‘A’ 2-bolt mounting and G1″/G1/2″ BSPP straight-thread ports for seamless installation. For maintenance, explore our vane pump cartridge kits.

For help selecting the best model or confirming fitment, call Northern Hydraulics’ specialists at (800) 823-4937 (Mon-Fri, 7 AM – 5 PM MST), or browse our full range of hydraulic pumps for additional options. Volume pricing starts at 4 units. All pumps ship same day if in stock and include a 12-month manufacturer warranty.

Compatibility & Applications

Direct Replacement Information

Fluidyne V101B5B1A20R provides exact replacement for Vickers V101B5B1A20R applications in systems requiring 16.4 cm³/r (1.00 in³/r) displacement and up to 2500 PSI operation..

Mounting Pattern: SAE ‘A’ 2-bolt
Inlet Port: G1″ BSPP
Outlet Port: G1/2″ BSPP

Common Applications

Commonly used in industrial machinery, material handling, production equipment. For more industry applications, see our vane pumps overview.

industrial machinery
material handling
production equipment

Important: Verify pump model V101B5B1A20R matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937 or consult our Vickers replacement pumps cross-reference.

Purchasing Information

Availability & Delivery

Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.

For current availability on V101B5B1A20R, call (800) 823-4937.

Warranty & Protection

12-month warranty covers manufacturing defects
30-day return window for unopened units
Free technical verification before ordering
Each pump pressure tested before shipment

Ordering Options

Order online for immediate processing. Phone orders welcome at (800) 823-4937.

Net 30 terms available for approved accounts.

Volume pricing available on orders of 4 or more units.

Support & Documentation

Installation guide included with every shipment (see single stage vane pumps specifications for downloadable resources)
Technical drawings and specifications available (compare other models like V101B3B1C20R for different displacement options)
Cross-reference guides for common brands (see all Vickers replacement options specifications)
Phone support: Monday-Friday, 7 AM – 5 PM MST

Questions? Call our specialists: (800) 823-4937 or browse more vane pumps for related solutions.

SKU: V101B5B1A20R

Fluidyne V101 V101B5B1A20R – 5 GPM 1.00 in³/r 2500 PSI SAE ‘A’ 2-Bolt Mount, 3/4″ Keyed Shaft – Direct Vickers V10 Replacement

Name: Fluidyne V101 V101B5B1A20R - 5 GPM 1.00 in³/r 2500 PSI SAE 'A' 2-Bolt Mount, 3/4" Keyed Shaft - Direct Vickers V10 Replacement
Brand: Northern Hydraulics Inc.
SKU: V101B5B1A20R
Price: 387.6 USD
Availability: InStock

$387.60

In stock

No sales tax

Expected delivery Feb 20 - Feb 24

1+ $ 387.60/piece

4+ $ 368.22/piece -5%

8+ $ 348.84/piece -10%

Looking for help or a discount?

Call (800) 823-4937

Reviews (0)

Rating & Reviews (

There are no reviews yet.

5 star

4 star

3 star

2 star

1 star