Home » Hydraulics Shop » Hydraulic Pumps » Hydraulic Vane Pumps » Single Stage Vane Pumps » Fluidyne V10 V101B5B1C20R – 5 GPM (1.00 in³/r), 2500 PSI, SAE ‘A’ 2-Bolt Flange, 3/4″ Straight Key Shaft – Direct Vickers V10 Replacement

Fluidyne V10 V101B5B1C20R – 5 GPM (1.00 in³/r), 2500 PSI, SAE 'A' 2-Bolt Flange, 3/4" Straight Key Shaft – Direct Vickers V10 Replacement

Stop losing $1,500 daily to unplanned hydraulic pump downtime. The V101B5B1C20R delivers 5 GPM at 2,500 PSI, proven in over 900 field installations. Typical ROI is achieved in under 3 months with direct Vickers compatibility.

Technical Specifications

Flow Performance

At 5 GPM, the V101B5B1C20R matches the flow needs of compact loaders and small presses. This output meets Vickers V10 pump requirements exactly. Operators report saving up to 7 hours weekly compared to patchwork repairs or inferior substitutes.

Performance stays consistent from 1,200 to 3,200 RPM. After 2,000 hours, efficiency remains at 94%. Comparable aftermarket vane pumps drop to 86% by that interval, increasing costs and downtime.

Installation requires just 35 minutes with standard wrenches. The 2-bolt SAE “A” mounting fits dozens of machines, including Bobcat loaders, Case tractors, and industrial presses. Compatible with ISO 32-68 hydraulic oil, water-in-oil emulsions, and phosphate ester fluids, seal life is maximized.

Efficiency & Durability

Maintains consistent efficiency throughout operational lifespan.

Features and Benefits

100% Vickers Compatibility: Identical mounting and port locations eliminate retrofitting. Fleet managers report 0% install errors.
Rated Pressure: 2,500 PSI capacity prevents heat buildup and premature wear. Operators note 19% lower maintenance costs.
Warranty Coverage: 12-month manufacturer warranty reduces financial risk for multi-unit buyers.

Operational Information

Cold starts succeed at 10°F. Continuous operation is rated for 2,000 hours at 2,500 PSI. Handles 15% overload spikes without damage. Replace when efficiency drops below 90%.

Quality Assurance

Manufactured to the highest standards with rigorous quality control throughout the production process.

For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.

Specifications

Weight	12 lbs
Manufacturer	Fluidyne Fluid Power
Pump Mounting Flange	2-Bolt Flange (SAE "A" size)
Pumps Drive Shaft	3/4" Straight Shaft with Key
Pumps Rotation	Right-Hand (Clockwise)
Pumps Max Pressure	2500 psi
Pumps Rated Speed	1200 RPM
Pumps Max Speed	3200 RPM
Pumps Displacement	16.4 cm³/r (1.00 in³/r)
Pumps Ports In	G1" BSPP Straight Thread
Pumps Ports Out	G1/2" BSPP Straight Thread

Purchasing Information

Availability & Delivery

Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.

For current availability on V101B5B1C20R, call (800) 823-4937.

Warranty & Protection

12-month warranty covers manufacturing defects
30-day return window for unopened units
Free technical verification before ordering
Each pump pressure tested before shipment

Ordering Options

Order online for immediate processing. For a complete overview of our Vickers-compatible pump options, see our compatibility listings. Phone orders welcome at (800) 823-4937.

Net 30 terms available for approved accounts.

Volume pricing available on orders of 4 or more units.

Support & Documentation

Installation guide included with every shipment—see our comprehensive single stage vane pump technical guides specifications for additional support.
Technical drawings and specifications available
Cross-reference guides for common brands
Phone support: Monday-Friday, 7 AM – 5 PM MST

Questions? Call our specialists: (800) 823-4937

Compatibility & Applications

Direct Replacement Information

This Fluidyne unit serves as a direct replacement for Vickers V101B5B1C20R in systems requiring 16.4 cm³/r (1.00 in³/r) displacement and 2500 PSI maximum pressure. For the full range of Vickers replacement pumps, see our compatibility selection..

Mounting Pattern: SAE ‘A’ 2-bolt
Inlet Port: G1″ BSPP
Outlet Port: G1/2″ BSPP

Common Applications

Commonly used in marine applications, stationary power units, and test stands with lower displacement requirements.

marine applications
stationary power units
test stands

Important: Verify pump model V101B5B1C20R matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.

Product Selection Guide

These FluiDyne V10 (V101) single vane pumps—part of our broader hydraulic pump family— all deliver the same displacement (16.4 cm³/r or 1.00 in³/r), max pressure (2500 PSI), and use the same SAE ‘A’ 2-bolt flange with G1″/G1/2″ BSPP ports. The key differences are in shaft type, port orientation, and rotation direction—features critical for matching existing system layouts, coupling types, and flow direction requirements in compact hydraulic applications.

Model Number	Flow Rate	Max Pressure	Displacement	Mounting
V101B5B1C20R (Current)	Contact us	3/4″ Straight Shaft with Key (1.75″ extension)	16.4 cm³/r (1.00 in³/r)	G1/2″ BSPP Straight Thread
V101B5B11D20R	Contact us	9-Tooth Splined Shaft	16.4 cm³/r (1.00 in³/r)	G1/2″ BSPP Straight Thread
V101B5B1A20R	Contact us	3/4″ Straight Shaft with Key (1.75″ extension)	16.4 cm³/r (1.00 in³/r)	G1/2″ BSPP Straight Thread
V101B5B1D20R	Contact us	3/4″ Straight Shaft with Key (1.75″ extension)	16.4 cm³/r (1.00 in³/r)	G1/2″ BSPP Straight Thread
V101B5B41B20L	Contact us	Shaft code 41	16.4 cm³/r (1.00 in³/r)	G1/2″ BSPP Straight Thread

Key Differences

Shaft Type

Difference: V101B5B1C20R, V101B5B1A20R, and V101B5B1D20R use a 3/4″ straight shaft with key; V101B5B11D20R applications uses a 9-tooth splined shaft; V101B5B41B20L uses shaft code 41 (verify for your application).

Selection Guide: Choose keyed shafts for standard couplings; select splined (V101B5B11D20R) for higher torque or when matching splined drive couplers.

Port Position

Difference: V101B5B1C20R: Inline with inlet (0°); V101B5B1A20R: Opposite from inlet (180°); V101B5B1D20R & V101B5B11D20R: 90° clockwise from inlet; V101B5B41B20L: 90° counter-clockwise from inlet.

Selection Guide: Select port orientation based on available space and hose routing—inline for straight-through connections, 90° for side ports in confined spaces, 180° for opposite-facing lines.

Rotation Direction

Difference: All but V101B5B41B20L are right-hand (clockwise); V101B5B41B20L is left-hand (counter-clockwise).

Selection Guide: Match pump rotation to your drive direction—choose right-hand for standard clockwise shafts, left-hand for counter-clockwise power sources.

Quick Selection Guide

If you need: A direct Vickers V10 replacement with straight shaft and inline (0°) ports for right-hand rotation

Choose: V101B5B1C20R

Because: It offers easy drop-in fit for standard applications needing inline connections.

If you need: Splined shaft for high-torque or splined drive, 90° port orientation, right-hand rotation

Choose: V101B5B11D20R

Because: Splined shaft handles higher torque and matches splined couplings. Maintenance and replacement parts are also available in our vane pump cartridge kits section.

If you need: Straight shaft with key, 180° (opposite) port orientation, right-hand rotation

Choose: V101B5B1A20R

Because: Provides opposite-facing ports for specific manifold or plumbing requirements.

If you need: Right-hand rotation, straight shaft with key, 90° port orientation

Choose: V101B5B1D20R

Because: Matches side port connections with standard keyed drive.

If you need: Left-hand (counter-clockwise) rotation, unique shaft (code 41), 90° CCW port orientation

Choose: V101B5B41B20L

Because: For systems requiring CCW drive and specific port/shaft configuration.

Compatibility: All models are 100% interchangeable with Vickers V10 pumps, use SAE J744 ‘A’ mount, and G1″/G1/2″ BSPP ports for easy system replacement or upgrade. Explore our full range of single stage vane pumps applications for additional configurations.

For application-specific guidance or cross-referencing your existing Vickers model, contact our hydraulic specialists at (800) 823-4937. If you require a lower displacement option, consider the V101B2B1C20R (0.40 in³/r, 6.6 cm³/r) for compact equipment needs. Same-day shipping available on in-stock items. Volume pricing from 4 units. All pumps include a 12-month manufacturer warranty.

SKU: V101B5B1C20R

Fluidyne V10 V101B5B1C20R – 5 GPM (1.00 in³/r), 2500 PSI, SAE ‘A’ 2-Bolt Flange, 3/4″ Straight Key Shaft – Direct Vickers V10 Replacement

Name: Fluidyne V10 V101B5B1C20R – 5 GPM (1.00 in³/r), 2500 PSI, SAE 'A' 2-Bolt Flange, 3/4" Straight Key Shaft – Direct Vickers V10 Replacement
Brand: Northern Hydraulics Inc.
SKU: V101B5B1C20R
Price: 387.6 USD
Availability: InStock