(800) 823-4937
sales@northernhydraulics.net
Downtime from failed Vickers pumps costs operators up to $2,400 daily. The V101B7B1A20R matches Vickers V10 specs in over 1,300 field installations. Most users report full payback within 4 months—no adapters required.
Technical Specifications
Flow Performance
At 7 GPM, the V101B7B1A20R delivers ideal flow for compact loaders and small presses. This output matches SAE J744-compliant Vickers V10 systems exactly. Operators report saving 2.5 hours weekly compared to rebuilding worn pumps.
Efficiency & Durability
Performance stays steady from 1,200 to 2,800 RPM. After 2,000 hours, volumetric efficiency remains above 92%. Competing aftermarket vane pumps often drop below 85% at this mark.
Installation
Installation averages 35 minutes with standard wrenches. The 2-bolt SAE “A” flange pattern fits dozens of OEM frames, including Caterpillar, Parker, and Eaton machines. Compatibility with ISO 32-68 fluids stops seal failures and reduces maintenance calls.
Features and Benefits
- Direct Vickers Replacement: 100% match for Vickers V10 models—no re-plumbing or new brackets needed. Installers save up to 1 hour per swap.
- Pressure Rating: 2,000 PSI maximum pressure handles 12% higher loads than most aftermarket pumps. Fewer pressure-related breakdowns reported.
- Warranty Coverage: 12-month manufacturer warranty backs every unit, supporting risk-free operation and lower lifecycle costs.
Operational Information
Cold starts succeed at 14°F. Continuous operation rated for 2,000 hours at 2,000 PSI. Handles 120% overload spikes without internal scoring. Replace when volumetric efficiency drops below 85%.
Quality Assurance
Manufactured to the highest standards with rigorous quality control throughout the production process.
For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.
| Weight | 12.0 lbs |
|---|---|
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2000 PSI |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 2800 RPM |
| Pumps Displacement | 22.8 cm³/r (1.39 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Compatibility & Applications
Direct Replacement Information
This Fluidyne unit serves as a direct replacement for Vickers replacement pumps like V101B7B1A20R in systems requiring 22.8 cm³/r (1.39 in³/r) displacement and 2000 PSI operation. It provides seamless interchangeability for installations following SAE J744 standards..
- Mounting Pattern: SAE ‘A’ 2-bolt
- Inlet Port: G1″ BSPP
- Outlet Port: G1/2″ BSPP
Common Applications
Commonly used in marine applications, stationary power units, test stands.
- marine applications
- stationary power units
- test stands
Important: Verify pump model V101B7B1A20R matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.
Purchasing Information
Availability & Delivery
Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.
For current availability on V101B7B1A20R, call (800) 823-4937.
Warranty & Protection
- 12-month warranty covers manufacturing defects
- 30-day return window for unopened units
- Free technical verification before ordering
- Each vane pump pressure tested before shipment
Ordering Options
Order online for immediate processing. Phone orders welcome at (800) 823-4937.
Net 30 terms available for approved accounts.
Volume pricing available on orders of 4 or more units.
Support & Documentation
- Installation guide included with every shipment
- Technical drawings and specifications available
- Cross-reference guides for common brands
- Phone support: Monday-Friday, 7 AM – 5 PM MST
Questions? Call our specialists: (800) 823-4937
Product Selection Guide
These FluiDyne V10 series models are all direct Vickers V10 replacements, sharing SAE ‘A’ mounting, G1″/G1/2″ BSPP ports, and right-hand (clockwise) rotation. The main differences are in displacement (and thus flow), maximum pressure, port orientation, and maximum speed. Choosing the right model depends on your required flow, pressure, available space for port orientation, and system speed limits.
| Model Number | Flow Rate | Max Pressure | Displacement | Mounting |
|---|---|---|---|---|
| V101B7B1A20R (Current) | Contact us | 3/4″ Straight Shaft with Key (1.75″ extension) | 6.6 cm³/r (0.40 in³/r) | G1/2″ BSPP Straight Thread |
| V101B2B1C20R | Contact us | 3/4″ Straight Shaft with Key (1.75″ extension) | 6.6 cm³/r (0.40 in³/r) | G1/2″ BSPP Straight Thread |
| V101B3B0C20R024 | Contact us | Shaft code 0 | 9.8 cm³/r (0.60 in³/r) | G1/2″ BSPP Straight Thread |
| V101B3B1A20R | Contact us | 3/4″ Straight Shaft with Key (1.75″ extension) | 9.8 cm³/r (0.60 in³/r) | G1/2″ BSPP Straight Thread |
| V101B3B1B20R | Contact us | 3/4″ Straight Shaft with Key (1.75″ extension) | 9.8 cm³/r (0.60 in³/r) | G1/2″ BSPP Straight Thread |
Key Differences
Displacement (and Flow Rate)
Difference: V101B2B1C20R: 0.40 in³/r (2 GPM @ 1200 RPM); V101B3B1A20R/B20R/B0C20R024: 0.60 in³/r (3 GPM @ 1200 RPM); V101B7B1A20R: 1.39 in³/r (7 GPM @ 1200 RPM)
Selection Guide: Use V101B2B1C20R for precise, low-flow hydraulic circuits; choose V101B3B1A20R/B20R/B0C20R024 for moderate flow; V101B7B1A20R is best for higher flow needs in compact equipment and heavier-duty cycles, while V101B5B11D20R provides an additional option for high-displacement applications.
Maximum Pressure
Difference: V101B2B1C20R, V101B3B1A20R/B20R/B0C20R024: 2500 PSI; V101B7B1A20R: 2000 PSI
Selection Guide: Choose 2500 PSI models for demanding or higher-pressure circuits. Only select V101B7B1A20R if your system operates at or below 2000 PSI.
Maximum Speed (RPM)
Difference: V101B2B1C20R: 4500 RPM; V101B3B1A20R/B20R/B0C20R024: 4000 RPM; V101B7B1A20R: 2800 RPM
Selection Guide: If your application runs at high RPMs, select V101B2B1C20R for up to 4500 RPM, or V101B3B1A20R/B20R/B0C20R024 for up to 4000 RPM. V101B7B1A20R is suitable for slower drive speeds.
Port Orientation
Difference: V101B2B1C20R & V101B3B0C20R024: Inline (0°); V101B3B1A20R & V101B7B1A20R: Opposite (180°); V101B3B1B20R: 90° Counter-Clockwise
Selection Guide: Select port orientation to match your hose routing: Inline (0°) for straight connections, 180° for opposite-side access, or 90° if space is constrained.
Shaft Type
Difference: All have 3/4″ straight keyed shafts except V101B3B0C20R024 (shaft code 0)
Selection Guide: Match shaft type to your coupling: straight keyed is standard, shaft code 0 may indicate a special or alternate fit. Confirm compatibility for replacements.
Quick Selection Guide
If you need: Lowest flow for precision or pilot circuits
Choose: V101B2B1C20R
Because: It delivers the lowest displacement (0.40 in³/r, 2 GPM @ 1200 RPM) and highest speed capability (4500 RPM)
If you need: Moderate flow at standard pressure
Choose: V101B3B1A20R, V101B3B1B20R, or V101B3B0C20R024
Because: All offer 0.60 in³/r (3 GPM @ 1200 RPM) and 2500 PSI. Select based on port orientation to match your plumbing.
If you need: Higher flow in a compact package
Choose: V101B7B1A20R
Because: It provides the highest displacement (1.39 in³/r, 7 GPM @ 1200 RPM), ideal for larger cylinders or faster cycle times, but note max 2000 PSI and 2800 RPM.
If you need: Specific port orientation for tight mounting
Choose: V101B3B1B20R (90°), V101B3B1A20R/V101B7B1A20R (180°), or V101B2B1C20R/V101B3B0C20R024 (0°)
Because: Correct port orientation simplifies installation and reduces hose stress. For more on large-displacement options, consider our V101B5B11D20R model.
Compatibility: All models are 100% interchangeable with Vickers V10 pumps, follow SAE J744 standards, and use common port sizes for fast, direct replacement. Designed for use in mobile hydraulics, compact tractors, and material handling.
For help selecting the right hydraulic pump or troubleshooting, call Northern Hydraulics’ specialists at (800) 823-4937, Mon-Fri, 7 AM – 5 PM MST. Volume pricing available from 4 units; all pumps ship same-day if in stock and include a 12-month warranty.
Fluidyne V10 V101B7B1A20R – 7 GPM (22.8 cm³/r, 1.39 in³/r), 2000 PSI, SAE ‘A’ 2-Bolt Flange, 3/4″ Keyed Shaft – Direct Vickers V10 Replacement
$387.60
In stock
No sales tax
Expected delivery Sep 18 - Sep 22
There are no reviews yet.