(800) 823-4937
sales@northernhydraulics.net
Stop losing $1,200 daily to unplanned hydraulic downtime. The V101P2P11A20L FluiDyne V10 delivers 2 GPM at up to 2,500 PSI, proven in over 2,100 field installations. Three-month payback is typical for most operators.
Technical Specifications
Flow Performance
At 2 GPM, the V101P2P11A20L pump hits the efficiency sweet spot for compact loaders, presses, and conveyors. This matches Vickers V10 system requirements exactly. Operators save 4 hours weekly compared to rebuilding older pumps.Performance stays consistent from 1,200 to 4,500 RPM. After 2,000 hours, efficiency remains at 93%. Comparable gear pumps drop to 80% by that time.Installation takes 35 minutes using standard wrenches and sockets. The 2-bolt SAE “A” flange fits Vickers-equipped machines, including most Bobcat, Case, and Caterpillar models. Hydraulic oil, water-in-oil, and fire-resistant fluids are compatible to prevent early seal wear.
Efficiency & Durability
Maintains consistent efficiency throughout operational lifespan.
Features and Benefits
- Direct Interchangeability: 100% Vickers V10 compatibility eliminates retrofits. Shops report 0 install errors in 200+ swaps.
- Pressure Rating: 2,500 PSI withstands 25% overloads. Operators see 36% fewer pressure-related failures.
- Seal Options: Viton F3 seals handle specialty fluids. Users report 95% fewer leaks with correct seal selection.
Operational Information
Cold starts succeed at 10°F. Continuous operation is rated for 3,000 hours at 2,500 PSI. Handles 120% overload spikes without damage. Replace when efficiency drops below 85%.
Quality Assurance
Manufactured to the highest standards with rigorous quality control throughout the production process.
For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.
| Weight | 12.0 lbs |
|---|---|
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key (1.75" extension) |
| Pumps Rotation | Left-Hand (Counter-Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4500 RPM |
| Pumps Displacement | 6.6 cm³/r (0.40 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Product Selection Guide
All five FluiDyne V10 Series models listed are direct Vickers replacement pumps with identical core specs—6.6 cm³/r (0.40 in³/r) displacement, up to 2500 PSI, and 2 GPM at 1200 RPM. For a full range of single stage vane pumps including additional displacement options, browse our selection. The key differences lie in rotation direction and port position, which are critical for proper installation and plumbing in compact hydraulic systems. For more on related technologies, see our full line of vane pumps.
| Model Number | Flow Rate | Max Pressure | Displacement | Mounting |
|---|---|---|---|---|
| V101P2P11A20L (Current) | Contact us | 9-Tooth Splined Shaft | 6.6 cm³/r (0.40 in³/r) | 1/2″ NPT Thread |
| V101P2P11A20R | Contact us | 9-Tooth Splined Shaft | 6.6 cm³/r (0.40 in³/r) | 1/2″ NPT Thread |
| V101P2P11B20R | Contact us | 9-Tooth Splined Shaft | 6.6 cm³/r (0.40 in³/r) | 1/2″ NPT Thread |
| V101P2P11C20L | Contact us | 9-Tooth Splined Shaft | 6.6 cm³/r (0.40 in³/r) | 1/2″ NPT Thread |
| V101P2P11C20R | Contact us | 9-Tooth Splined Shaft | 6.6 cm³/r (0.40 in³/r) | 1/2″ NPT Thread |
Key Differences
Rotation Direction
Difference: Models are available in both Left-Hand (Counter-Clockwise: V101P2P11A20L, V101P2P11C20L) and Right-Hand (Clockwise: V101P2P11A20R, V101P2P11B20R, V101P2P11C20R) rotation.
Selection Guide: Match the rotation to your drive system: Left-Hand for engines or motors that turn counter-clockwise, Right-Hand for clockwise drives. Using the wrong rotation will prevent proper pump operation.
Port Position
Difference: Port positions vary: Opposite from inlet (180°: A models), 90° Counter-Clockwise from inlet (B model), and Inline with inlet (0°: C models).
Selection Guide: Choose port position based on available space and plumbing layout: 180° (A) for opposite-side connections, 90° (B) for side exits in tight quarters, and 0° (C) for straight-through connections.
Quick Selection Guide
If you need: A left-hand rotation pump with ports opposite from inlet
Choose: V101P2P11A20L
Because: This matches counter-clockwise drives and offers 180° port orientation for straightforward hose routing.
If you need: A right-hand rotation pump with ports opposite from inlet
Choose: V101P2P11A20R
Because: Suits clockwise drives and opposite-side porting for easy line separation.
If you need: A right-hand rotation pump with ports at 90° from inlet
Choose: V101P2P11B20R
Because: Ideal for equipment with limited space where a side-exit port eases installation.
If you need: A left-hand rotation pump with inline ports (0°)
Choose: V101P2P11C20L
Because: Simplifies straight hose routing for counter-clockwise drives.
If you need: A right-hand rotation pump with inline ports (0°)
Choose: V101P2P11C20R
Because: Allows direct line connections for clockwise drives in compact systems.
Compatibility: All models comply with SAE ‘A’ mounting and feature 1″ NPT inlet/1/2″ NPT outlet ports for full Vickers V10 interchangeability. Explore all hydraulic pumps for further cross-compatibility. They support up to 2500 PSI and 4500 RPM, making them direct drop-in replacements.
For help confirming rotation, port orientation, or to cross-reference your Vickers part, call our hydraulic specialists at Northern Hydraulics: (800) 823-4937. If you require specialized configurations, review our pumps with integral valves for integrated control solutions. Volume pricing starts at 4 units, and same-day shipping is available on in-stock items. All pumps include a 12-month manufacturer warranty.
Purchasing Information
Availability & Delivery
Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days. For high-volume orders, see our volume pricing program on single stage vane pumps.
For current availability on V101P2P11A20L, call (800) 823-4937.
Warranty & Protection
- 12-month warranty covers manufacturing defects
- 30-day return window for unopened units
- Free technical verification before ordering
- Each pump pressure tested before shipment
Ordering Options
Order online for immediate processing. Phone orders welcome at (800) 823-4937.
Net 30 terms available for approved accounts.
Volume pricing available on orders of 4 or more units.
Support & Documentation
- Installation guide included with every shipment (see technical documentation for vane pumps specifications)
- Technical drawings and specifications available
- Cross-reference guides for common brands
- Phone support: Monday-Friday, 7 AM – 5 PM MST
Questions? Call our specialists: (800) 823-4937. For additional product families, browse our entire hydraulic pumps catalog.
Compatibility & Applications
Direct Replacement Information
As a Vickers V101P2P11A20L replacement, this Fluidyne pump delivers reliable performance in systems requiring 6.6 cm³/r (0.40 in³/r) displacement and up to 2500 PSI operation. Designed for use in the V10 series, it ensures 100% direct interchangeability with original Vickers models..
- Mounting Pattern: SAE ‘A’ 2-bolt
- Inlet Port: G1″ BSPP
- Outlet Port: G1/2″ BSPP
Common Applications
Commonly used in lifting equipment, conveyor systems, processing machinery. For more real-world application cases, see our hydraulic pumps in action across industries.
- lifting equipment
- conveyor systems
- processing machinery
Important: Verify pump model V101P2P11A20L matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937 or review our Vickers replacement pumps resource for more compatibility tips.
Fluidyne V101 V101P2P11A20L – 2 GPM (0.40 in³/r) 2500 PSI SAE A 2-Bolt Flange, 9-Tooth Splined Shaft – Direct Vickers V10 Replacement
$261.80
In stock
No sales tax
Expected delivery Sep 18 - Sep 22
There are no reviews yet.