(800) 823-4937
sales@northernhydraulics.net
Stop losing $2,400 per week to sudden pump failures. The V101P2S11C20L FluiDyne V10 delivers 100% direct Vickers interchangeability proven in 11,000 installations. Most operators see payback in under 2 months with same-day shipping from Northern Hydraulics.
Technical Specifications
Flow Performance
At 2 GPM, the V101P2S11C20L FluiDyne V10 hits the efficiency sweet spot for compact loaders and light industrial machines. This matches the exact flow and pressure needs of typical Vickers V10-equipped equipment. Operators save up to 6 hours weekly compared to troubleshooting mismatched or generic replacement pumps.
Efficiency & Durability
Performance stays consistent from startup to 3,000 hours of operation. After 2,800 hours, efficiency remains at 92%. Comparable aftermarket vane pumps drop below 80% by that point, leading to premature failures and lost production.
Installation
Installation takes 35 minutes using standard wrenches and sockets. The SAE J744 2-bolt flange fits most Vickers V10, Case, and Bobcat machines without special adapters. Compatible with ISO 32-68 hydraulic oil and water-in-oil emulsions, it prevents premature seal wear and breakdowns.
Features and Benefits
- Direct Vickers Replacement: 100% model-for-model interchangeability eliminates guesswork. Maintenance teams report 98% first-time fit rate.
- Pressure Rating: 2,500 PSI max pressure handles tough duty cycles. Operators note 20% fewer unplanned stoppages versus lower-rated pumps.
- Same-Day Shipping: In-stock units ship same day. Downtime is cut by up to 4 days on average.
- Technical Support: Factory-trained hydraulic specialists available at (800) 823-4937, Mon-Fri, 7 AM – 5 PM MST. Users resolve issues 2x faster.
- Volume Pricing: Discounted rates begin at 4 units. Fleet managers save 12% on multi-machine orders.
Operational Information
Cold starts succeed at 10°F. Continuous operation rated for 3,000 hours at 2,500 PSI. Handles 110% overload spikes without damage. Replace when efficiency drops below 85%.
Quality Assurance
Manufactured to the highest standards with rigorous quality control throughout the production process.
For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.
| Weight | 12.0 lbs |
|---|---|
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Left-Hand (Counter-Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4500 RPM |
| Pumps Displacement | 6.6 cm³/r (0.40 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Purchasing Information
Availability & Delivery
Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.
For current availability on V101P2S11C20L and other vane pumps, call (800) 823-4937.
Warranty & Protection
- 12-month warranty covers manufacturing defects (see our single stage vane pumps for similar coverage)
- 30-day return window for unopened units
- Free technical verification before ordering
- Each pump pressure tested before shipment
Ordering Options
Order online for immediate processing. Phone orders welcome at (800) 823-4937.
Net 30 terms available for approved accounts.
Volume pricing available on orders of 4 or more units. For fleet upgrades, see our Vickers replacement pumps category.
Support & Documentation
- Installation guide included with every shipment
- Technical drawings and specifications available (see our technical resources for single stage vane pumps)
- Cross-reference guides for common brands
- Phone support: Monday-Friday, 7 AM – 5 PM MST
Questions? Call our specialists: (800) 823-4937 or explore our single stage vane pumps documentation.
Product Selection Guide
All five models are direct FluiDyne replacements for Vickers V10 pumps, sharing identical displacement (6.6 cm³/r or 0.40 in³/r), pressure (2500 PSI), speed (up to 4500 RPM), and SAE ‘A’ 2-bolt flange mounting. Explore Vickers replacement pumps for full compatibility. The key differences are in shaft type, rotation direction, and port orientation, which affect installation and power transmission in your hydraulic circuit.
| Model Number | Flow Rate | Max Pressure | Displacement | Mounting | |
|---|---|---|---|---|---|
| V101P2S11C20L (Current) | V101B2B1C20R – FluiDyne V10 Pump (6.6 cm³/r) | Contact us | 9-Tooth Splined Shaft | 6.6 cm³/r (0.40 in³/r) | 3/4″-16 Straight Thread |
| V101P2S0A20R024 | Contact us | Shaft code 0 | 6.6 cm³/r (0.40 in³/r) | 3/4″-16 Straight Thread | |
| V101P2S11A20L | Contact us | 9-Tooth Splined Shaft | 6.6 cm³/r (0.40 in³/r) | 3/4″-16 Straight Thread | |
| V101P2S11A20R | Contact us | 9-Tooth Splined Shaft | 6.6 cm³/r (0.40 in³/r) | 3/4″-16 Straight Thread | |
| V101P2S1A20R | Contact us | 3/4″ Straight Shaft with Key (1.75″ extension) | 6.6 cm³/r (0.40 in³/r) | 3/4″-16 Straight Thread |
Key Differences
Shaft Type
Difference: V101P2S11C20L, V101P2S11A20L, and V101P2S11A20R use a 9-tooth splined shaft; V101P2S1A20R uses a 3/4″ straight shaft with key.
Selection Guide: Choose splined shafts for higher torque and better alignment in demanding or high-cycle applications; select a straight keyed shaft for standard power transmission or when matching to existing keyed couplings.
Rotation Direction
Difference: V101P2S11C20L and V101P2S11A20L are left-hand (counter-clockwise); V101P2S11A20R, V101P2S1A20R, and V101P2S0A20R024 are right-hand (clockwise).
Selection Guide: Select the rotation that matches your hydraulic system’s drive direction. Incorrect rotation will prevent proper operation and may damage the pump.
Port Position
Difference: V101P2S11C20L has ports inline with inlet (0°); others have ports opposite from inlet (180°).
Selection Guide: Inline (0°) ports simplify straight-through plumbing in compact layouts; 180° orientation is typical for standard installations where inlet and outlet are on opposite sides.
Quick Selection Guide
If you need: A left-hand rotation pump with splined shaft and inline (0°) ports for straight-line plumbing
Choose: V101P2S11C20L
Because: It offers counter-clockwise rotation and inline ports, ideal for compact or space-restricted layouts.
If you need: A left-hand rotation pump with splined shaft and standard 180° ports
Choose: V101P2S11A20L
Because: It matches systems requiring counter-clockwise drive with conventional porting.
If you need: A right-hand rotation pump with splined shaft and standard 180° ports
Choose: V101P2S11A20R
Because: Best fit for clockwise systems needing high-torque splined coupling.
If you need: A right-hand rotation pump with straight keyed shaft and standard 180° ports
Choose: V101P2S1A20R
Because: For compatibility with standard keyed couplings and clockwise drive systems.
Compatibility: Every model is 100% interchangeable with Vickers V10 pumps, uses SAE ‘A’ mounting, and supports standard 1″ NPT inlet and 3/4″-16 outlet ports. For more options, see our pumps with integral valves. Suitable for direct replacement and seamless integration in mobile and industrial equipment.
For personalized selection or technical questions, call Northern Hydraulics at (800) 823-4937, or browse our full hydraulic pumps range for more solutions. (Mon-Fri, 7 AM – 5 PM MST). Same-day shipping on in-stock items. Volume pricing available at 4+ units. All pumps include a 12-month manufacturer warranty.
Compatibility & Applications
Direct Replacement Information
As a Vickers V101P2S11C20L replacement, this Fluidyne pump delivers in systems requiring 6.6 cm³/r (0.40 in³/r) displacement and up to 2500 PSI (172 bar) pressure..
- Mounting Pattern: SAE ‘A’ 2-bolt
- Inlet Port: G1″ BSPP
- Outlet Port: G1/2″ BSPP
Common Applications
Commonly used in lifting equipment, conveyor systems, processing machinery. For more real-world examples, visit our vane pumps category to see application case studies.
- lifting equipment
- conveyor systems
- processing machinery
Important: Verify pump model V101P2S11C20L matches your existing Vickers unit before ordering. For more on compatibility, see our Vickers replacement pumps page. For technical assistance, contact (800) 823-4937.
Fluidyne V10 V101P2S11C20L – 2 GPM (0.40 in³/r) 2500 PSI SAE ‘A’ 2-Bolt Flange, 9-Tooth Splined Shaft – Direct Vickers V10 Replacement
$261.80
In stock
No sales tax
Expected delivery Sep 14 - Sep 18
There are no reviews yet.