Home » Hydraulics Shop » Hydraulic Pumps » Pumps with Integral Valves » Fluidyne V101 V101P3P1D20R – 3 GPM (0.60 in³/r) 2500 PSI SAE ‘A’ 2-Bolt Flange, 3/4″ Keyed Shaft – Direct Vickers V10 Replacement

Fluidyne V101 V101P3P1D20R - 3 GPM (0.60 in³/r) 2500 PSI SAE 'A' 2-Bolt Flange, 3/4" Keyed Shaft - Direct Vickers V10 Replacement

Equipment downtime drains $1,250 per day from fleet budgets. The V101P3P1D20R matches every Vickers V10 spec—100% interchangeability proven in over 4,500 field installations. Typical ROI is under 45 days with same-day shipping on all in-stock units.

Technical Specifications

Flow Performance

At 3 GPM, the V101P3P1D20R delivers precise flow for small loaders and industrial presses. This matches Vickers V10 demands exactly. Operators save up to 6 hours weekly by avoiding rework or custom fittings.

Efficiency & Durability

Performance stays consistent from 1,200 to 4,000 RPM. After 2,000 hours, efficiency remains at 92%. Competing pumps often drop to 80% or less in similar duty cycles.

Installation

Installation takes just 35 minutes using standard shop tools. The 2-bolt SAE “A” flange fits existing V10, Vickers, and Rexroth mounts with zero adapters. Compatibility with ISO 32-68 hydraulic fluids prevents costly seal damage.

Features and Benefits

Interchangeable Design: 100% matches Vickers V10—no modifications, no downtime. Operators report 100% first-time fitment.
Pressure Rating: 2,500 PSI max handles 98% of mobile and industrial jobs. Fleet managers see 35% fewer failures.
Port Orientation: 90° outlet rotation simplifies hose routing. Installers reduce leak points by 28% per system.

Operational Information

Cold starts succeed at 15°F. Continuous operation rated for 2,000 hours at 2,500 PSI. Handles 15% overload spikes without permanent damage. Replace when efficiency drops below 85%.

Quality Assurance

Manufactured to the highest standards with rigorous quality control throughout the production process.

For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.

Specifications

Weight	12.0 lbs
Pump Mounting Flange	2-Bolt Flange (SAE "A" size)
Manufacturer	Fluidyne Fluid Power
Pumps Drive Shaft	3/4" Straight Shaft with Key (1.75" extension)
Pumps Rotation	Right-Hand (Clockwise)
Pumps Max Pressure	2500 psi
Pumps Rated Speed	1200 RPM
Pumps Max Speed	4000 RPM
Pumps Displacement	9.8 cm³/r (0.60 in³/r)
Pumps Ports In	G1" BSPP Straight Thread
Pumps Ports Out	G1/2" BSPP Straight Thread

Purchasing Information

Availability & Delivery

Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.

For current availability on V101P3P1D20R or other single stage vane pumps, call (800) 823-4937.

Warranty & Protection

12-month warranty covers manufacturing defects (see all Vickers replacement pumps for coverage details)
30-day return window for unopened units
Free technical verification before ordering
Each pump pressure tested before shipment

Ordering Options

Order online for immediate processing. Phone orders welcome at (800) 823-4937.

Net 30 terms available for approved accounts.

Volume pricing available on orders of 4 or more units. Explore our full range of vane pumps for additional options.

Support & Documentation

Installation guide included with every shipment (see technical specs for single stage vane pumps specifications)
Technical drawings and specifications available
Cross-reference guides for common brands
Phone support: Monday-Friday, 7 AM – 5 PM MST

Questions? Call our specialists: (800) 823-4937

Product Selection Guide

These four FluiDyne V10 (V101) single vane pump models are all direct Vickers V10 replacements, sharing identical displacement (0.60 in³/r), max pressure (2500 PSI), and mounting (SAE ‘A’ 2-bolt flange). Their key differences are in shaft type, rotation direction, and port orientation—critical for matching your pump to the drive system, piping layout, and rotation needs of your application.

Model Number	Flow Rate	Max Pressure	Displacement	Mounting
V101P3P1D20R (Current)	Contact us	3/4″ Straight Shaft with Key (1.75″ extension)	9.8 cm³/r (0.60 in³/r)	1/2″ NPT Thread
V101B3B0C20R024 – FluiDyne V10 Pump (9.8 cm³/r (0.60 in³/r))	Contact us	Shaft code 0	9.8 cm³/r (0.60 in³/r)	1/2″ NPT Thread
V101B2B1C20R – FluiDyne V10 Pump (6.6 cm³/r (0.40 in³/r), Keyed Shaft)	Contact us	9-Tooth Splined Shaft	9.8 cm³/r (0.60 in³/r)	1/2″ NPT Thread
V101P3P11A20R	Contact us	9-Tooth Splined Shaft	9.8 cm³/r (0.60 in³/r)	1/2″ NPT Thread
V101P3P11B20R	Contact us	9-Tooth Splined Shaft	9.8 cm³/r (0.60 in³/r)	1/2″ NPT Thread

Key Differences

Shaft Type

Difference: V101P3P1D20R uses a 3/4″ straight keyed shaft; the other three (V101P3P11A20L, V101P3P11A20R, V101P3P11B20R) have 9-tooth splined shafts.

Selection Guide: Choose straight keyed for standard couplings or lower torque applications (see all pumps with integral valves for advanced configurations). or lower torque; choose splined for high-torque or when your drive uses splined connections.

Rotation Direction

Difference: V101P3P1D20R and V101P3P11A20R/B20R are right-hand (clockwise); V101P3P11A20L is left-hand (counter-clockwise).

Selection Guide: Match rotation to your motor/engine—right-hand for standard clockwise, left-hand for counter-clockwise drives.

Port Position

Difference: V101P3P1D20R: 90° clockwise from inlet; V101P3P11A20L & V101P3P11A20R: 180° opposite from inlet; V101P3P11B20R: 90° counter-clockwise from inlet.

Selection Guide: Choose port orientation that best fits your plumbing: 90° for side exits in tight spaces, 180° for straight-through connections.

Quick Selection Guide

If you need: Standard keyed shaft, right-hand rotation, and 90° port position (clockwise from inlet)

Choose: V101P3P1D20R

Because: Ideal for standard direct replacements where a keyed shaft and right-hand rotation are required, with porting to match existing 90° lines.

If you need: Splined shaft for high-torque, right-hand rotation, and 180° port position

Choose: V101P3P11A20R

Because: Perfect for high-torque drives with a need for straight-through porting.

If you need: Splined shaft, left-hand rotation, and 180° port position

Choose: V101P3P11A20L

Because: Best for applications requiring counter-clockwise rotation and straight-through plumbing.

If you need: Splined shaft, right-hand rotation, 90° port position (counter-clockwise from inlet)

Choose: V101P3P11B20R

Because: Best for right-hand rotation and side exit porting to the left.

Compatibility: All models are 100% interchangeable with Vickers V10, use SAE ‘A’ mounting, and have 1″ NPT inlet/1/2″ NPT outlet for easy drop-in replacement. For the full range, visit our Vickers replacement pumps page.

For help with pump selection, cross-referencing, or troubleshooting, call Northern Hydraulics at (800) 823-4937, Mon-Fri, 7 AM – 5 PM MST. Same-day shipping available on in-stock items; volume pricing starts at 4 units. All pumps include a 12-month manufacturer warranty.

Compatibility & Applications

Direct Replacement Information

The Fluidyne V101P3P1D20R is a direct replacement for the Vickers V101P3P1D20R pump, offering 100% interchangeability for systems requiring 9.8 cm³/r (0.60 in³/r) displacement and up to 2500 PSI (172 bar) operating pressure..

Mounting Pattern: SAE ‘A’ 2-bolt
Inlet Port: G1″ BSPP
Outlet Port: G1/2″ BSPP

Common Applications

Commonly used in mobile hydraulics, auxiliary power units, and compact equipment (see additional application case studies here).

mobile hydraulics
auxiliary power units
compact equipment

Important: Verify pump model V101P3P1D20R matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.

SKU: V101P3P1D20R

4.6

5 reviews

Fluidyne V101 V101P3P1D20R – 3 GPM (0.60 in³/r) 2500 PSI SAE ‘A’ 2-Bolt Flange, 3/4″ Keyed Shaft – Direct Vickers V10 Replacement

Name: Fluidyne V101 V101P3P1D20R - 3 GPM (0.60 in³/r) 2500 PSI SAE 'A' 2-Bolt Flange, 3/4" Keyed Shaft - Direct Vickers V10 Replacement
Brand: Fluidyne Fluid Power
SKU: V101P3P1D20R
Price: 261.8 USD
Availability: InStock
Rating: 4.60 (5 reviews)

$261.80

In stock

No sales tax

Expected delivery Jun 15 - Jun 19

1+ $ 261.80/piece

4+ $ 248.71/piece -5%

8+ $ 235.62/piece -10%

Brand: Fluidyne Fluid Power·More Fluidyne Fluid Power Hydraulic Pumps →

Looking for help or a discount?

Call (800) 823-4937

Reviews (5)

Rating & Reviews ( 5 4.6

dale w

Rated 5 out of 5

2 months ago

Ordered this to get a skid steer attachment back up and running. Shipped fast, fit perfect on the SAE A mount, keyed shaft lined up no problem — honestly couldn't ask for more at this price point.
Miller Farms

Rated 5 out of 5

6 months ago

works great
Terry B.

Rated 4 out of 5

2 years ago

replaced an old vickers on our log splitter and this thing dropped right in without any fuss. been running it hard for a few weeks now and zero leaks, good pressure. would buy again.
R.K.

Rated 5 out of 5

2 years ago

been through two of the name brand ones over the years and this fluidyne has been sitting in our shop press running daily for going on three months without a hiccup. build quality feels right, seals look good, pressure is where it needs to be
Frank O.

Rated 4 out of 5

2 years ago

pump itself is exactly what I needed and performs well, no complaints there. took a couple extra days to arrive though which held up the job a bit. would still order from here again.

4.6/5

Rated 4.6 out of 5