Home » Hydraulics Shop » Hydraulic Pumps » Hydraulic Vane Pumps » Single Stage Vane Pumps » Fluidyne V101 V101P3P27A20R – 3 GPM (0.60 in³/r) 2500 PSI SAE ‘A’ 2-Bolt Mount, Shaft Code 27, Vickers V10 Direct Replacement Pump

Fluidyne V101 V101P3P27A20R - 3 GPM (0.60 in³/r) 2500 PSI SAE 'A' 2-Bolt Mount, Shaft Code 27, Vickers V10 Direct Replacement Pump

Stop losing $2,340 daily to unexpected hydraulic pump failures. The V101P3P27A20R matches Vickers V10 performance in over 7,200 installations. Typical 3-month ROI means downtime pays for the pump fast.

Technical Specifications

Flow Performance

At 3 GPM, the V101P3P27A20R hits the efficiency sweet spot for mid-size loaders and presses. This matches most OEM Vickers V10 requirements exactly. Operators save over 4 hours weekly versus retrofitting off-brand pumps.

Efficiency & Durability

Performance stays consistent between 1200-4000 RPM. After 2,000 operating hours, efficiency holds at 92%. Comparable generic vane pumps drop to 84% by 2,000 hours, increasing energy costs.

Installation

Installation takes 35 minutes using standard shop tools. The 2-bolt SAE “A” flange fits most tractors, presses, and compactors with no adapters. Standard hydraulic oil, water-in-oil emulsions, and fire-resistant fluids are fully supported, so seal failures are rare.

Features and Benefits

Direct Vickers Compatibility: 100% model-for-model interchange eliminates fitment risk. Operators see 0% misalignment issues.
Pressure Rating: Handles up to 2,500 PSI without pressure drops. Maintenance teams report 18% fewer leaks.
Fast Shipping: Same-day shipment on in-stock items slashes downtime by 1-2 days per incident.

Operational Information

Cold starts succeed at 10°F. Continuous operation rated for 2,000 hours at 2,500 PSI. Handles 15% overload spikes without damage. Replace when efficiency drops below 88%.

Quality Assurance

Manufactured to the highest standards with rigorous quality control throughout the production process.

For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.

Specifications

Weight	12 lbs
Pump Mounting Flange	2-Bolt Flange (SAE "A" size)
Manufacturer	Fluidyne Fluid Power
Pumps Drive Shaft	3/4" Straight Shaft with Key
Pumps Rotation	Right-Hand (Clockwise)
Pumps Max Pressure	2500 psi
Pumps Rated Speed	1200 RPM
Pumps Max Speed	4000 RPM
Pumps Displacement	9.8 cm³/r (0.60 in³/r)
Pumps Ports In	G1" BSPP Straight Thread
Pumps Ports Out	G1/2" BSPP Straight Thread

Compatibility & Applications

Direct Replacement Information

This Fluidyne unit serves as a direct replacement for Vickers V101P3P27A20R, part of our complete line of single stage vane pumps built for reliability. in systems requiring 9.8 cm³/r (0.60 in³/r) displacement and up to 2500 PSI hydraulic pressure..

Mounting Pattern: SAE ‘A’ 2-bolt
Inlet Port: G1″ BSPP
Outlet Port: G1/2″ BSPP

Common Applications

Commonly used in marine applications, stationary power units or similar equipment, such as the V101B2B1C20R – FluiDyne V10 Pump applications for smaller displacement needs., test stands.

marine applications
test stands

Important: Verify pump model V101P3P27A20R matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.

For real-world performance examples, see our case studies of Vickers replacement pump installations in mobile and industrial equipment.

Product Selection Guide

These FluiDyne V101 single vane pump models are all direct Vickers V10 replacements with identical displacement (0.60 in³/r), pressure (2500 PSI), and mounting (SAE ‘A’ 2-bolt flange). For technical guides and full specifications, visit our single stage vane pump resources. The primary differences are shaft type, rotation direction, and port position—each affecting installation compatibility, drive coupling, and piping layout.

Model Number	Flow Rate	Max Pressure	Displacement	Mounting
V101P3P27A20R (Current)	Contact us	Shaft code 27	9.8 cm³/r (0.60 in³/r)	1/2″ NPT Thread
V101P3P0C20L024	Contact us	Shaft code 0	9.8 cm³/r (0.60 in³/r)	1/2″ NPT Thread
V101P3P11A20L	Contact us	9-Tooth Splined Shaft	9.8 cm³/r (0.60 in³/r)	1/2″ NPT Thread
V101P3P11A20R	Contact us	9-Tooth Splined Shaft	9.8 cm³/r (0.60 in³/r)	1/2″ NPT Thread
V101P3P11B20R	Contact us	9-Tooth Splined Shaft	9.8 cm³/r (0.60 in³/r)	1/2″ NPT Thread

Key Differences

Shaft Type

Difference: V101P3P3P27A20R uses a straight keyed shaft (shaft code 27), while V101P3P11A20L, V101P3P11A20R, and V101P3P11B20R use a 9-tooth splined shaft.

Selection Guide: Choose a straight keyed shaft for standard couplings or if replacing a keyed Vickers pump; select a splined shaft for high-torque or splined-coupling applications.

Rotation Direction

Difference: V101P3P3P27A20R and V101P3P11A20R/B20R are right-hand (clockwise); V101P3P0C20L024 and V101P3P11A20L are left-hand (counter-clockwise).

Selection Guide: Match the pump rotation to your prime mover or existing system—incorrect rotation will prevent operation or damage the pump.

Port Position

Difference: V101P3P3P27A20R, V101P3P11A20R, and V101P3P11A20L have ports opposite each other (180°); V101P3P0C20L024 has inline ports (0°); V101P3P11B20R has ports at 90° counter-clockwise from inlet.

Selection Guide: Choose port orientation to match your system piping. 180° ports are best for straightforward, opposite-line plumbing; 0° (inline) for parallel runs; 90° for compact or corner installations.

Quick Selection Guide

If you need: Standard keyed shaft, right-hand (CW) rotation, opposite (180°) ports

Choose: V101P3P3P27A20R

Because: Ideal for most Vickers V10 direct replacements with typical shaft and port configuration.

If you need: Splined shaft, right-hand (CW) rotation, opposite (180°) ports

Choose: V101P3P11A20R

Because: For high-torque drives or when a splined shaft is required, with standard port layout. For other configurations, see options like V101B3B0C20R024 – FluiDyne V10 Pump.

If you need: Splined shaft, right-hand (CW) rotation, 90° port position

Choose: V101P3P11B20R

Because: For right-hand systems where space or plumbing requires a 90° port orientation.

If you need: Splined shaft, left-hand (CCW) rotation, opposite (180°) ports

Choose: V101P3P11A20L

Because: For left-hand drive systems with splined couplings and standard port arrangement.

If you need: Keyed shaft, left-hand (CCW) rotation, inline (0°) ports

Choose: V101P3P0C20L024

Because: For left-hand drive systems with parallel port requirements.

Compatibility: All models are 100% interchangeable with Vickers V10, featuring SAE ‘A’ mounting and standard NPT ports for straightforward replacement. For advanced systems, explore our pumps with integral valves for enhanced control. Same-day shipping is available for in-stock items. Volume pricing starts at 4 units, and each pump includes a 12-month manufacturer warranty.

For help selecting the best model for your application or for Vickers cross-reference, call Northern Hydraulics’ hydraulic specialists at (800) 823-4937 (800) 823-4937, Mon-Fri, 7 AM – 5 PM MST.

Purchasing Information

Availability & Delivery

Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.

For current availability on V101P3P27A20R, call (800) 823-4937.

Warranty & Protection

12-month warranty covers manufacturing defects
30-day return window for unopened units
Free technical verification before ordering
Each pump pressure tested before shipment

Ordering Options

Order online for immediate processing. Phone orders welcome at (800) 823-4937.

Net 30 terms available for approved accounts.

Volume pricing available on orders of 4 or more units.

Support & Documentation

Installation guide included with every shipment
Technical drawings and specifications available in our vane pump documentation library
Cross-reference guides for common brands
Phone support: Monday-Friday, 7 AM – 5 PM MST

Questions? Call our specialists: (800) 823-4937

SKU: V101P3P27A20R

Fluidyne V101 V101P3P27A20R – 3 GPM (0.60 in³/r) 2500 PSI SAE ‘A’ 2-Bolt Mount, Shaft Code 27, Vickers V10 Direct Replacement Pump

Name: Fluidyne V101 V101P3P27A20R - 3 GPM (0.60 in³/r) 2500 PSI SAE 'A' 2-Bolt Mount, Shaft Code 27, Vickers V10 Direct Replacement Pump
Brand: Northern Hydraulics Inc.
SKU: V101P3P27A20R
Price: 447.1 USD
Availability: InStock