(800) 823-4937
sales@northernhydraulics.net
Stop losing $1,200 daily to unplanned hydraulic failures. The V101P3P38C20R—proven in over 8,500 installations—delivers 3 GPM at 2,500 PSI with zero fitment risk. Typical payback in 3 months.
Technical Specifications
Flow Performance
At 3 GPM, the V101P3P38C20R hits the efficiency sweet spot for compact construction and agricultural equipment. This matches Vickers V10 pump requirements exactly. Operators save up to 5 hours weekly versus rebuilding worn alternatives.Performance stays consistent from 1,200 to 4,000 RPM. After 2,000 hours, efficiency remains at 96%. Comparable gear pumps drop to 85% by then.Installation takes just 40 minutes using standard shop tools. The SAE J744 2-bolt flange fits loaders, presses, and skids without adapters. ISO 32-68 fluid compatibility prevents seal degradation and extends service life.
Efficiency & Durability
Maintains consistent efficiency throughout operational lifespan.
Features and Benefits
- Direct Vickers Interchangeability: 100% match to V10 models eliminates costly downtime. Fleet managers report 27% fewer installation errors.
- Pressure Rating: 2,500 PSI max handles 20% higher loads than typical gear pumps. Operators see fewer system stalls.
- Same-Day Shipping: Orders before 3 PM ship same day, cutting average wait by 48 hours. Contact (800) 823-4937 for technical support.
Operational Information
Cold starts succeed at 10°F. Continuous operation rated for 2,000 hours at 2,500 PSI. Handles 110% overload spikes without damage. Replace when efficiency drops below 90%.
Quality Assurance
Manufactured to the highest standards with rigorous quality control throughout the production process.
For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.
| Weight | 12.0 lbs |
|---|---|
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4000 RPM |
| Pumps Displacement | 9.8 cm³/r (0.60 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Product Selection Guide
These five FluiDyne V10 Series hydraulic vane pumps are all direct replacements for Vickers replacement pumps, offering identical displacement (0.60 in³/r), max pressure (2500 PSI), and mounting (SAE ‘A’ 2-bolt flange). The key differences between models lie in rotation direction, shaft type, and port orientation—critical factors for matching your system’s plumbing and drive requirements.
| Model Number | Flow Rate | Max Pressure | Displacement | Mounting |
|---|---|---|---|---|
| V101P3P38C20R (Current) | Contact us | 11-Tooth Splined Shaft | 9.8 cm³/r (0.60 in³/r) | 1/2″ NPT Thread |
| V101P3P0C20L024 | Contact us | Shaft code 0 | 9.8 cm³/r (0.60 in³/r) | 1/2″ NPT Thread |
| V101P3P11A20L | Contact us | 9-Tooth Splined Shaft | 9.8 cm³/r (0.60 in³/r) | 1/2″ NPT Thread |
| V101P3P11A20R | Contact us | 9-Tooth Splined Shaft | 9.8 cm³/r (0.60 in³/r) | 1/2″ NPT Thread |
| V101P3P11B20R | Contact us | 9-Tooth Splined Shaft | 9.8 cm³/r (0.60 in³/r) | 1/2″ NPT Thread |
Key Differences
Rotation Direction
Difference: V101P3P38C20R and V101P3P11A20R/B20R are right-hand (clockwise); V101P3P0C20L024 and V101P3P11A20L are left-hand (counter-clockwise)
Selection Guide: Match pump rotation to your drive source—right-hand for standard clockwise drives, left-hand for counter-clockwise systems
Shaft Type
Difference: V101P3P38C20R features an 11-tooth splined shaft; V101P3P0C20L024 uses shaft code 0; V101P3P11A20L/A20R/B20R have 9-tooth splined shafts
Selection Guide: Choose the shaft that matches your coupling and torque requirements—splined shafts are best for higher torque and positive drive engagement
Port Position
Difference: V101P3P38C20R and V101P3P0C20L024 have inline ports (0°); V101P3P11A20L/A20R have ports 180° from inlet; V101P3P11B20R has ports 90° counter-clockwise from inlet
Selection Guide: Select port orientation to simplify plumbing: inline (0°) for straight-through lines, 180° for opposite-side connections, 90° for perpendicular hoses in tight spaces
Quick Selection Guide
If you need: Clockwise (right-hand) rotation with high-torque splined shaft and inline ports
Choose: V101P3P38C20R
Because: Ideal for standard clockwise drives needing robust 11-tooth splined coupling and straightforward plumbing
If you need: Counter-clockwise (left-hand) rotation with inline ports
Choose: V101P3P0C20L024
Because: Suited for reverse drives, maintaining simple inline plumbing
If you need: Counter-clockwise rotation with 180° port orientation
Choose: V101P3P11A20L
Because: Perfect when hoses must exit from opposite sides and the drive spins left
If you need: Clockwise rotation with 180° or 90° port orientation
Choose: V101P3P11A20R (180°) or V101P3P11B20R (90°)
Because: Choose 180° for opposite hose exits, or 90° for side-facing connections in tight spaces; both support 9-tooth splined shafts for good torque capacity
Compatibility: All models are 100% interchangeable with Vickers V10 pumps and share SAE ‘A’ mounting, as found in our comprehensive hydraulic pumps selection, 1″ NPT inlets, and 1/2″ NPT outlets for seamless swap-in.
For expert selection help or cross-referencing Vickers models, call Northern Hydraulics at (800) 823-4937 (800) 823-4937, Mon-Fri, 7 AM – 5 PM MST. Same-day shipping is available on in-stock items, and all pumps carry a 12-month warranty. Volume pricing starts at 4 units.
Purchasing Information
Availability & Delivery
Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.
For current availability on V101P3P38C20R, call (800) 823-4937.
Warranty & Protection
- 12-month warranty covers manufacturing defects
- 30-day return window for unopened units
- Free technical verification before ordering
- Each pump pressure tested before shipment
Ordering Options
Order online for immediate processing. Phone orders welcome at (800) 823-4937. (800) 823-4937.
Net 30 terms available for approved accounts.
Volume pricing available on orders of 4 or more units.
Support & Documentation
- Installation guide included with every shipment (see our vane pumps documentation specifications for technical resources)
- Technical drawings and specifications available (explore related pumps with integral valves if your system requires advanced features)
- Cross-reference guides for common brands
- Phone support: Monday-Friday, 7 AM – 5 PM MST
Questions? Call our specialists: (800) 823-4937
Compatibility & Applications
Direct Replacement Information
The V101P3P38C20R from Fluidyne replaces Vickers V101P3P38C20R units in systems requiring 9.8 cm³/r (0.60 in³/r) displacement and up to 2500 PSI operating pressure. This direct replacement ensures full interchangeability with Vickers models and supports SAE J744 mounting standards..
- Mounting Pattern: SAE ‘A’ 2-bolt
- Inlet Port: G1″ BSPP
- Outlet Port: G1/2″ BSPP
Common Applications
Commonly used in agricultural equipment, construction machinery, utility vehicles. For more details on applications, see our V101B2B1C20R – FluiDyne V10 Pump for smaller displacement needs.
- agricultural equipment
- construction machinery
- utility vehicles
Important: Verify pump model V101P3P38C20R matches your existing Vickers unit before ordering. For users needing similar displacement with alternate mounting, review V101B3B0C20R024 – FluiDyne V10 Pump. For technical assistance, contact (800) 823-4937. (800) 823-4937.
Fluidyne V10 V101P3P38C20R – 3 GPM, 0.60 in³/r, 2500 PSI, SAE ‘A’ 2-Bolt Flange, 11-Tooth Splined Shaft – Direct Vickers V10 Replacement
$261.80
In stock
No sales tax
Expected delivery Aug 14 - Aug 18
There are no reviews yet.