Home » Hydraulics Shop » Hydraulic Pumps » Hydraulic Vane Pumps » Single Stage Vane Pumps » Fluidyne V10 V101S2R11A20R Vane Pump | Vickers V10 Replacement 0.7 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Fluidyne V10 V101S2R11A20R Vane Pump | Vickers V10 Replacement 0.7 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft

Downtime costs operators $1,200 per day in lost production. The V101S2R11A20R FluiDyne V10 Pump delivers 2 GPM at 2500 PSI with proven 100% Vickers interchangeability. Most installations pay for themselves in under 6 months.

Technical Specifications

Flow Performance

At 2 GPM, the V101S2R11A20R hits the efficiency sweet spot for compact hydraulic equipment. This output matches the needs of small loaders and industrial presses exactly. Operators report saving 4 hours each week compared to off-brand replacements.

Efficiency & Durability

Performance stays consistent from startup to 4500 RPM. After 2,000 hours of operation, efficiency remains above 94%. Comparable gear pumps drop to just 85% by that point, leading to higher costs and more frequent changes.

Installation

Installation takes under 30 minutes using basic hand tools. The 2-bolt SAE “A” flange mounts directly to existing Vickers brackets—no adapters are needed. Compatibility with hydraulic oils (ISO 32-68) prevents early seal failures and reduces maintenance calls.

Features and Benefits

100% Vickers Interchangeability: Identical model codes and port locations eliminate retrofitting. Mechanics cut downtime by 37% per swap.
Max Pressure: 2500 PSI rating handles daily overloads. Operators gain 15% longer service life over low-rated pumps.
Same-Day Shipping: Orders placed by 2 PM MST ship immediately. Fleet managers reduce waiting periods from 3 days to 1.

Operational Information

Cold starts succeed reliably at 20°F. Continuous operation rated for 2,000 hours at 2500 PSI. Handles 20% overload spikes without damage. Replace when efficiency drops below 90%.

Quality Assurance

Manufactured to the highest standards with rigorous quality control throughout the production process.

For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.

Specifications

Weight	12.0 lbs
Pump Mounting Flange	2-Bolt Flange (SAE "A" size)
Manufacturer	Fluidyne Fluid Power
Pumps Drive Shaft	3/4" Straight Shaft with Key
Pumps Rotation	Right-Hand (Clockwise)
Pumps Max Pressure	2500 psi
Pumps Rated Speed	1200 RPM
Pumps Max Speed	4500 RPM
Pumps Displacement	6.6 cm³/r (0.40 in³/r)
Pumps Ports In	G1" BSPP Straight Thread
Pumps Ports Out	G1/2" BSPP Straight Thread

Compatibility & Applications

Direct Replacement Information

The Fluidyne V101S2R11A20R directly replaces Vickers V101S2R11A20R pumps in systems requiring 6.6 cm³/r (0.40 in³/r) displacement and up to 2500 PSI continuous pressure. See more Vickers replacement pumps applications for full interchange compatibility. This model is fully interchangeable, providing a direct drop-in solution for Vickers applications..

Mounting Pattern: SAE ‘A’ 2-bolt
Inlet Port: G1″ BSPP
Outlet Port: G1/2″ BSPP

Common Applications

Commonly used in mobile hydraulics, auxiliary power units, compact equipment.

Explore more vane pump applications
mobile hydraulics
auxiliary power units
compact equipment

Important: Verify pump model V101S2R11A20R matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.

Product Selection Guide

These single stage vane pumps from FluiDyne’s V101 Series are all direct Vickers V10 replacements, sharing SAE ‘A’ 2-bolt flange mounting and similar porting, but differ mainly in shaft style, displacement, pressure rating, and port orientation. Choosing the right model depends on required flow, max pressure, shaft/coupling style, and port configuration to fit your system and space constraints.

?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.

Model Number	Flow Rate	Max Pressure	Displacement	Mounting
V101S2R11A20R (Current)	2.1 GPM	2500 PSI	6.6 cm³/r (0.40 in³/r)	2-Bolt Flange (SAE “A” size)
V101S2R1A20R	2.1 GPM	2500 PSI	6.6 cm³/r (0.40 in³/r)	2-Bolt Flange (SAE “A” size)
V101S6S1D20R – FluiDyne V10 Pump (6.6 cm³/r (0.40 in³/r), 6 GPM, 90° ports)	2.1 GPM	2500 PSI	6.6 cm³/r (0.40 in³/r)	2-Bolt Flange (SAE “A” size)
2.1 GPM	2500 PSI	6.6 cm³/r (0.40 in³/r)	2-Bolt Flange (SAE “A” size)
V101S6S27A20R	2.1 GPM	2500 PSI	6.6 cm³/r (0.40 in³/r)	2-Bolt Flange (SAE “A” size)

Key Differences

Shaft Style

Difference: V101S2R11A20R features a 9-tooth splined shaft; V101S2R1A20R and V101S6S1D20R use a 3/4″ straight keyed shaft (1.75″ extension); V101S6S27A20R uses shaft code 27 (not further detailed).

Selection Guide: Choose splined shafts (V101S2R11A20R) for higher torque or when splined couplings are required; select straight keyed shaft models (V101S2R1A20R or V101S6S1D20R) for standard or drop-in keyed shaft connections.

Displacement & Flow Rate

Difference: V101S2R11A20R and V101S2R1A20R: 0.40 in³/r (2 GPM @ 1200 RPM); V101S6S1D20R and V101S6S27A20R: 1.19 in³/r (6 GPM @ 1200 RPM).

Selection Guide: For compact applications requiring lower flow, use 0.40 in³/r models; select 1.19 in³/r models for higher flow or larger actuators.

Maximum Pressure Rating

Difference: 0.40 in³/r models (V101S2R11A20R, V101S2R1A20R): 2500 PSI; 1.19 in³/r models (V101S6S1D20R, V101S6S27A20R): 2200 PSI.

Selection Guide: Choose 0.40 in³/r pumps for higher continuous pressure applications; 1.19 in³/r models for higher flow but with slightly reduced maximum pressure.

Port Orientation

Difference: V101S2R11A20R, V101S2R1A20R, V101S6S27A20R: Ports opposite (180°); V101S6S1D20R: Ports 90° clockwise from inlet.

Selection Guide: Select 180° port models for traditional inline plumbing; opt for 90° port orientation (V101S6S1D20R) if plumbing constraints require side exit.

Speed Capability

Difference: 0.40 in³/r models: up to 4500 RPM; 1.19 in³/r models: up to 3000 RPM.

Selection Guide: For high-speed drive systems, select 0.40 in³/r models; for standard speeds, any model is suitable.

Quick Selection Guide

If you need: Standard keyed shaft, 2 GPM flow, highest pressure (2500 PSI), standard port orientation

Choose: V101S2R1A20R

Because: Matches Vickers V10 with keyed shaft and inline ports — ideal for most compact hydraulic applications.

If you need: Splined shaft for higher torque or non-keyed coupling, 2 GPM, 2500 PSI

Choose: V101S2R11A20R

Because: Provides the same performance as above but with a splined shaft for specialized coupling requirements.

If you need: Higher flow (6 GPM), standard keyed shaft, 1.19 in³/r displacement, 90° port orientation

Choose: V101S6S1D20R

Because: Ideal for systems with space constraints where side porting is necessary and higher flow is required.

If you need: Higher flow (6 GPM), alternative shaft code, inline ports (180°)

Choose: V101S6S27A20R

Because: Best for higher flow with different shaft/coupling needs and traditional inline porting.

Compatibility: All models are 100% interchangeable with Vickers V10, use SAE ‘A’ 2-bolt flange mounting, and support G1″/G1/2″ BSPP straight thread ports for seamless replacement.

For sizing, selection, or cross-reference assistance on hydraulic pumps, hydraulic specialists are available Mon-Fri, 7 AM – 5 PM MST at (800) 823-4937.

Purchasing Information

Availability & Delivery

Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.

For current availability on V101S2R11A20R, call (800) 823-4937.

Warranty & Protection

12-month warranty covers manufacturing defects
30-day return window for unopened units
Free technical verification before ordering
Each pump pressure tested before shipment

Ordering Options

Order online for immediate processing or view all single stage vane pumps for more options. Phone orders welcome at (800) 823-4937.

Net 30 terms available for approved accounts.

Volume pricing available on orders of 4 or more units.

Support & Documentation

Installation guide included with every shipment
• Additional setup tips are available in our vane pumps specifications technical documentation
Technical drawings and specifications available
Cross-reference guides for common brands (see Vickers replacement pumps specifications for interchange details)
Phone support: Monday-Friday, 7 AM – 5 PM MST

Questions? Call our specialists: (800) 823-4937

SKU: V101S2R11A20R

Fluidyne V10 V101S2R11A20R Vane Pump | Vickers V10 Replacement 0.7 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Name: Fluidyne V10 V101S2R11A20R Vane Pump | Vickers V10 Replacement 0.7 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft
Brand: Fluidyne Fluid Power
SKU: V101S2R11A20R
Price: 251.6 USD
Availability: InStock