(800) 823-4937
sales@northernhydraulics.net
Stop losing $1,200 every week to machine downtime. The V101S3R1A20R delivers 3 GPM at 1200 RPM, proven in over 3,000 field installations. 3-month ROI typical for operators replacing legacy Vickers pumps.
Technical Specifications
Flow Performance
At 3 GPM, the V101S3R1A20R hits the efficiency sweet spot for compact hydraulic machinery. This matches light industrial loader and conveyor requirements exactly. Operators save 5 hours weekly versus off-brand replacements.Performance stays consistent across 1,200 to 4,000 RPM. After 2,000 hours, efficiency remains at 95%. Comparable gear pumps drop to 83% by then.Installation takes 35 minutes using standard tools. The 2-bolt SAE “A” pattern fits dozens of Vickers-equipped machines without adapters. Standard hydraulic oils prevent seal degradation.
Efficiency & Durability
Maintains consistent efficiency throughout operational lifespan.
Features and Benefits
- Direct Vickers Interchangeability: Model-for-model match eliminates retrofit costs. Operators report 100% first-time fit.
- 2500 PSI Rating: Handles higher loads than Vickers V10. Maintenance teams see 15% fewer leaks.
- Standard Inlet/Outlet Ports: 1-5/16″ and 1-1/16″ straight threads simplify hose swaps. Downtime drops by 30% per repair cycle.
Operational Information
Cold starts succeed at 10°F. Continuous operation rated for 2,000 hours at 2,500 PSI. Handles 10% overload spikes without damage. Replace when efficiency drops below 90%.
Quality Assurance
Manufactured to the highest standards with rigorous quality control throughout the production process.
For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.
| Weight | 12.0 lbs |
|---|---|
| Dimensions | 5 × 5 × 5 in |
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4500 RPM |
| Pumps Displacement | 6.6 cm³/r (0.40 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Product Selection Guide
These FluiDyne V10 Series single stage vane pump models are direct replacements for Vickers V10 units, designed for compact hydraulic systems. Key differences across the models are found in displacement, flow rate, maximum pressure, shaft configuration, port orientation, and port positioning. View our complete selection of hydraulic pumps for more model options. Selection depends mainly on required system flow, available mounting space, and connection layout.
?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.
| Model Number | Flow Rate | Max Pressure | Displacement | Mounting |
|---|---|---|---|---|
| V101S3R1A20R (Current) | 2.1 GPM | 2500 PSI | 6.6 cm³/r (0.40 in³/r) | 2-Bolt Flange (SAE “A” size) |
| V101S6S1D20R | 2.1 GPM | 2500 PSI | 6.6 cm³/r (0.40 in³/r) | 2-Bolt Flange (SAE “A” size) |
| V101S6S1D20R | 2.1 GPM | 2500 PSI | 6.6 cm³/r (0.40 in³/r) | 2-Bolt Flange (SAE “A” size) |
| V101S6S27A20R | 2.1 GPM | 2500 PSI | 6.6 cm³/r (0.40 in³/r) | 2-Bolt Flange (SAE “A” size) |
| V101S6S27C20R | 2.1 GPM | 2500 PSI | 6.6 cm³/r (0.40 in³/r) | 2-Bolt Flange (SAE “A” size) |
Key Differences
Displacement & Flow Rate
Difference: V101S3R1A20R delivers 3 GPM at 1200 RPM (0.60 in³/r), while V101S6S1D20R, V101S6S27A20R, and V101S6S27C20R deliver 6 GPM at 1200 RPM (1.19 in³/r).
Selection Guide: Choose V101S3R1A20R for light-duty, lower-flow systems (e.g., compact tractors). Select any V101S6S model for higher-flow needs (e.g., faster cylinder actuation or larger actuators).
Maximum Pressure & Speed
Difference: V101S3R1A20R supports up to 2500 PSI and 4000 RPM; V101S6S models are rated for up to 2200 PSI and 3000 RPM.
Selection Guide: For applications requiring higher continuous pressure or higher speed, use V101S3R1A20R. For systems operating below 2200 PSI, any V101S6S model is suitable.
Port Orientation & Position
Difference: V101S3R1A20R: Ports opposite (180°). : Port position 90° clockwise from inlet. V101S6S27A20R: Ports opposite (180°). V101S6S27C20R: Ports inline with inlet (0°).
Selection Guide: Match port orientation to your plumbing layout: 180° for direct-opposite connections, 90° for side exits, 0° for inline installations in confined spaces.
Shaft Configuration
Difference: V101S3R1A20R and have a 3/4″ straight key shaft (1.75″ extension); V101S6S27A20R and V101S6S27C20R use shaft code 27 (details not specified, likely variant for specialty fit).
Selection Guide: Standard keyed shafts fit most couplings. If your setup requires a specific shaft profile, verify compatibility—choose shaft code 27 for matched requirements.
Port Threads
Difference: V101S3R1A20R: Inlet 1-5/16″-12, Outlet 1-1/16″-12 (SAE threads). V101S6S models: G1″ BSPP Inlet, G1/2″ BSPP Outlet (British Standard Pipe Parallel).
Selection Guide: Select based on your system’s thread standards—use V101S3R1A20R for SAE connections, V101S6S models for BSPP piping.
Quick Selection Guide
If you need: Lower flow, higher pressure, or maximum speed (up to 3 GPM, 2500 PSI, 4000 RPM)
Choose: V101S3R1A20R
Because: Ideal for compact, high-pressure circuits with SAE-threaded ports.
If you need: Higher flow (6 GPM) at moderate pressure (up to 2200 PSI), with BSPP ports
Choose: Any V101S6S model
Because: All deliver the same flow and pressure, differing only in port position and shaft detail.
If you need: Specific port orientation for plumbing fit
Choose: (90°), V101S6S27A20R (180°), or V101S6S27C20R (0°)
Because: Select based on whether your hoses enter straight, from the side, or opposite the inlet.
If you need: BSPP port connections
Choose: Any V101S6S model
Because: All V101S6S models use BSPP threads for inlet/outlet.
Compatibility: All models are direct Vickers V10 replacements, follow SAE ‘A’ 2-bolt mounting, and offer 100% dimensional interchangeability. For ongoing maintenance, see our selection of vane pump cartridge kits. Select the correct port thread (SAE vs BSPP) for your system plumbing.
For application-specific guidance, call Northern Hydraulics at (800) 823-4937 or explore our full range of vane pumps for more solutions. (800) 823-4937 (Mon-Fri, 7 AM – 5 PM MST).
Compatibility & Applications
Direct Replacement Information
The V101S3R1A20R from Fluidyne replaces Vickers V101S3R1A20R units in hydraulic systems requiring a displacement of 6.6 cm³/r (0.40 in³/r), maximum pressure of 2500 PSI, and rated speed of 1200 RPM. This direct replacement ensures 100% compatibility and interchangeability with Vickers models, following SAE J744 mounting standards. Same-day shipping is available for in-stock items..
- Mounting Pattern: SAE ‘A’ 2-bolt
- Inlet Port: G1″ BSPP
- Outlet Port: G1/2″ BSPP
Common Applications
Commonly used in agricultural equipment, construction machinery, utility vehicles. For more real-world examples and case studies, see our Vickers replacement pumps applications.
- agricultural equipment
- construction machinery
- utility vehicles
Important: Verify pump model V101S3R1A20R matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.
Purchasing Information
Availability & Delivery
Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.
For current availability on V101S3R1A20R, call (800) 823-4937 or browse our single stage vane pumps for alternate quick-ship options. (800) 823-4937.
Warranty & Protection
- 12-month warranty covers manufacturing defects—see details on our hydraulic pumps warranty page.
- 30-day return window for unopened units
- Free technical verification before ordering
- Each pump pressure tested before shipment
Ordering Options
Order online for immediate processing or learn more about our range of single stage vane pumps. Phone orders welcome at (800) 823-4937.
Net 30 terms available for approved accounts.
Volume pricing available on orders of 4 or more units.
Support & Documentation
- Installation guide included with every shipment. For technical specifications and selection advice, visit our hydraulic pumps resource center.
- Technical drawings and specifications available
- Cross-reference guides for common brands and helpful vane pump cartridge kits specifications for ongoing maintenance.
- Phone support: Monday-Friday, 7 AM – 5 PM MST
Questions? Call our specialists: (800) 823-4937
Fluidyne V10 V101S3R1A20R Vane Pump | Vickers V10 Replacement 0.7 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$251.60
Ready to order
No sales tax
Expected delivery Oct 14 - Oct 20
Get an exact shipping rate for your ZIP in the cart
Secure checkoutEncrypted card payments · pay over time with Affirm, Klarna or Afterpay
Fit my application without any modifications, shaft and bolt pattern matched up exactly. Shipping was quick too, had it in a couple days. Only reason I'm not giving it higher marks is the inlet port fitting was a little rough on the threads — got it sorted but had to chase it with a tap.
Pump runs okay but took a little longer than I expected to prime up the first time. Once it got going it's been fine, just worth knowing if you're swapping one out on something that's been sitting.
Customer brought in a machine with a dead Vickers, ordered this as the replacement and it swapped right in. Flow and pressure came up where they needed to be. Would've been a perfect experience but the packaging was a little beat up when it arrived — pump itself looked fine though.
Been running it about three weeks. Seems alright but not totally sure yet if it'll hold up long term. Pressure is where it needs to be.
exactly as described