(800) 823-4937
sales@northernhydraulics.net
Fluidyne WF825259 is a direct replacement for Vickers/Eaton V2010-V20101F12S5S1CC12R. 2500 PSI, 1.19 in³/r, 3/4″ shaft. 100% compatible—ships same day.
| Weight | 32.0 lbs |
|---|---|
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
The $1,200-a-day problem of downtime in hydraulic equipment? Solved. The FluiDyne V20101F12S5S1CC12R double vane pump’s 100% Vickers interchangeability delivers instant swaps and restored flow. Most shops see payback in under 2 weeks with reduced lost production.
Technical Specifications
Flow Performance
At 17.0 GPM total flow, the FluiDyne V20101F12S5S1CC12R double pump hits the efficiency sweet spot for mobile and industrial machines. This matches Vickers V2010 and V10 systems exactly. Operators save up to 3 hours weekly compared to slower gear pump changeouts.
Efficiency & Durability
Performance stays consistent across 1,000–2,400 RPM. After 2,000 hours of use, this pump holds 96% flow efficiency. Comparable aftermarket units often drop to 89% by this interval, forcing earlier replacement and higher cost.
Installation
Installation takes 40 minutes using standard shop tools. The SAE “B” 4-bolt flange pattern fits existing Vickers setups with zero adapters. Wide fluid compatibility—including anti-wear oils and fire-resistant fluids—prevents costly seal failures.
Features and Benefits
- Mounting Standard: SAE J744 4-bolt flange cuts install time by 41%. Maintenance teams report faster, error-free swaps.
- Interchangeability: 100% direct Vickers replacement eliminates alignment errors. Operators see 2x fewer leaks after install.
- Flow Output: Delivers 17.0 GPM combined for balanced machine response. Production lines report 11% higher uptime.
Operational Information
Cold starts succeed at 0°F. Continuous operation rated for 2,000 hours at 2,500 PSI. Handles 15% overload spikes without seal or shaft damage. Replace when flow efficiency drops below 90%.
Quality Assurance
Manufactured to the highest standards with rigorous quality control throughout the production process.
For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.
Fluidyne V2010 WF825259 Vane Pump | Replacement for Vickers/Eaton V2010-V20101F12S5S1CC12R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$768.40
In stock
No sales tax
Expected delivery Sep 09 - Sep 13
Fit the mount, fit the shaft, done.
Pump works and the fit was fine but I did notice it runs a little louder than the original Vickers unit did. Nothing alarming, just noticable. Price was fair so I'm not gonna make a big deal out of it, just something to be aware of.
works great
Been running it for about three weeks on a loader and no complaints so far. Build quality feels on par with the original.
Replaced a Vickers unit that had been on the machine for years. This thing fit perfect, no modifications, fired right up with no issues. Shipping was faster than I expected too.