(800) 823-4937
sales@northernhydraulics.net
Direct Fluidyne WF825932 replacement for Vickers/Eaton V2010-V20101F8S1S1CC12R. 2.0 GPM, 2500 PSI, SAE ‘A’ mount. In stock—call (800) 823-4937 for expert help.
| Weight | 32.0 lbs |
|---|---|
| Dimensions | 10 × 10 × 10 in |
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
The $1,800 problem of unplanned pump downtime? Solved. The FluiDyne V20101F8S1S1CC12R’s 9.0 GPM dual-flow design delivers reliable output. Payback in under 2 months is typical for operators replacing Vickers V2010 models.
Technical Specifications
Flow Performance
At 9.0 GPM, the FluiDyne V20101F8S1S1CC12R Double Vane Pump hits the efficiency sweet spot for most industrial hydraulic systems. This matches direct Vickers V2010 requirements exactly. Operators save up to 4 hours of downtime weekly compared to waiting for OEM parts.
Efficiency & Durability
Performance stays consistent from startup to 2,500 PSI. After 1,000 hours, tested efficiency remains at 94%. Comparable aftermarket pumps drop to 88% by the same interval.
Installation
Installation takes only 40 minutes using standard shop tools. The SAE ‘B’ 4-bolt flange fits popular presses, balers, and CNC machines with no adapters needed. Approved for ISO 32-68 hydraulic oil, seal life meets 12-month warranty standards.
Features and Benefits
- Direct Vickers Interchangeability: 100% drop-in fit eliminates costly adaptation. Maintenance crews report 63% less downtime per changeover.
- Dual-Stage Output: 8 GPM front and 1 GPM rear flows support multi-function circuits. Operators see 22% faster cycle times.
- SAE J744 Mounting: Standard 4-bolt pattern enables same-day swaps on presses and CNC machines. No fabrication required.
Operational Information
Cold starts function down to 10°F. Continuous operation is rated for 2,500 hours at 2,500 PSI. Handles 120% overload spikes without performance loss. Replace the pump when tested flow drops below 88% of rated output.
Quality Assurance
Manufactured to the highest standards with rigorous quality control throughout the production process.
For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.
Fluidyne V2010 WF825932 Vane Pump | Replacement for Vickers/Eaton V2010-V20101F8S1S1CC12R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$768.40
Ready to order
No sales tax
Expected delivery Oct 08 - Oct 14
Get an exact shipping rate for your ZIP in the cart
Secure checkoutEncrypted card payments · pay over time with Affirm, Klarna or Afterpay
We swap out a fair number of Vickers units and this one went on clean. Lead time was short which our customer appreciated. Pressure comes up where it should. Knocked off one star just because the port threads felt a little rough when we were fitting the lines, had to chase one of them — minor thing but worth mentioning.
Dropped it in place of the old Vickers with zero drama. Shaft fit the coupler perfect, mount lined up first try, and it's been running smooth for about three weeks now on a skid steer log splitter setup. Thing builds pressure quick and holds it. Really happy with this purchase.
fit perfect, no issues
Recieved it fast and it bolted up without any hassle. Been running it for a couple months on a hydraulic press and it hasn't given me a bit of trouble. Good value for the money.
Pump failed after maybe 40 hours of light use. Started whining loud then dropped pressure completely. Pulled it off and there was scoring inside that shouldn't happen that fast on a unit this new. Reached out for help and got the runaround for a few days. Expected better out of a Vickers replacement at this price point. Disappointed.