(800) 823-4937
sales@northernhydraulics.net
Direct Fluidyne WF825719 pump—100% Vickers/Eaton V2010-V20101F8S2S1CB12L replacement. 2.0 GPM, 2500 PSI. Same-day shipping & expert support: (800) 823-4937.
| Manufacturer | Fluidyne Fluid Power |
|---|---|
| Pumps Max Pressure | 2,500 PSI |
| Pumps Rated Speed | 1,200 RPM |
| Pumps Max Speed | 4,000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Left-Hand (Counter-Clockwise) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Shipping weight | 32 lb |
| Package size | 10 × 10 × 10 in |
The $3,200 loss from unplanned downtime per week? Solved. The FluiDyne V20101F8S2S1CB12L double vane pump’s 100% Vickers interchangeability delivers seamless changeover with zero rework. Most operators see full payback in under 3 months from reduced downtime and labor savings.
Technical Specifications
Flow Performance
At 10.0 GPM total flow, the FluiDyne V2010 double vane pump meets exact needs for Vickers-equipped presses and mobile machines. This matches the original Vickers V2010 and V10 models line for line. Operators reclaim up to 6 hours weekly compared to sourcing and adapting generic pumps.
Efficiency & Durability
Performance remains steady from 2-10 GPM over hundreds of cycles. After 2,000 hours in service, efficiency stays above 92%. By comparison, most non-OEM pumps drop below 85% efficiency after 1,000 hours, driving up energy and maintenance costs.
Installation
Installation takes just 35 minutes with basic hand tools. The SAE “B” 4-bolt flange matches Vickers layouts—no adapters or re-work needed. Compatible with standard ISO 32-68 hydraulic oils, the unit resists seal failure from fluid mismatch, reducing leaks and downtime.
Features and Benefits
- Direct Vickers Replacement: 100% interchangeability eliminates retrofit labor. Maintenance teams report 0% fitment issues after install.
- Pressure Rating: Handles up to 2,500 PSI. Operators see 18% fewer pressure-related breakdowns over 12 months.
- Same-Day Shipping: Ships same day for in-stock units, slashing average wait time by 67% versus typical lead times.
Operational Information
Cold starts succeed at 10°F. Continuous operation is rated for 2,000 hours at 2,500 PSI. Handles 10% overload spikes without damage. Replace when efficiency drops below 90%.
Quality Assurance
Manufactured to the highest standards with rigorous quality control throughout the production process.
For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.
Fluidyne V2010 WF825719 Vane Pump | Replacement for Vickers/Eaton V2010-V20101F8S2S1CB12L 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$768.40
Ready to order
No sales tax
Expected delivery Oct 19 - Oct 23
Get an exact shipping rate for your ZIP in the cart
Secure checkoutEncrypted card payments · pay over time with Affirm, Klarna or Afterpay
works fine, no leaks so far
had the old vickers go out on a log splitter, ordered this and it came in quick. bolted right up, keyed shaft lined up perfect, thing's been running strong ever since
Swapped this out on a skid steer that had been sitting for two weeks waiting on parts. Fit was dead-on, no adapter plates, no drama — thing fired right up and held pressure like it should. Shipping was faster than I expected too.
Pump itself is great, matched up to our application with zero issues and the customer had the machine back same week. Only reason I'm not leaving the top mark is the packaging was a little roughed up when it arrived — contents were fine though, just something to note.
no complaints