(800) 823-4937
sales@northernhydraulics.net
Fluidyne WF825265 double vane pump—drop-in replacement for Vickers/Eaton V2010-V20101F8S2S1CC12R. 2.0 GPM, 2500 PSI. In stock, ships same day. Call (800) 823-4937.
| Weight | 32.0 lbs |
|---|---|
| Dimensions | 10 × 10 × 10 in |
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Hydraulic failures cost operators over $2,000 per day in lost production. The FluiDyne V2010 Double Pump (V20101F8S2S1CC12R) solves this with 100% Vickers interchangeability and same-day shipping from Northern Hydraulics. Typical payback is under three months for most shops.
Technical Specifications
Flow Performance
At 10.0 GPM total flow, the FluiDyne V2010 matches the exact requirements of many Vickers-equipped presses and compactors. This direct fit eliminates downtime for part swaps or hose re-routing. Operators report up to three saved hours weekly compared to adapting generic pumps.
Efficiency & Durability
Performance stays steady across 2,000-2,500 PSI. After 2,000 hours, efficiency holds at 94%. Comparable remanufactured double vane pumps often drop below 87% by this point, causing increased power costs and slower cycles.
Installation
Installation takes just 35 minutes using standard shop tools. The SAE “B” 4-bolt flange fits Vickers V2010, V20, and V10 setups directly, with no adapters. Compatibility with ISO 32-68 hydraulic oils prevents seal swelling or early failure.
Features and Benefits
- 100% Vickers Interchangeability: Direct fit ensures no downtime or retraining. Fleet managers report 27% fewer callouts per year.
- Pressure Rating: 2,500 PSI max rating handles industrial cycles. Users report 18% longer service intervals than off-brand models.
- Dual Flow Design: 8 GPM front and 2 GPM rear supply two circuits at once. Reduces auxiliary pump needs by 33%.
Operational Information
Cold starts succeed at 10°F. Continuous operation is rated for 2,000 hours at 2,500 PSI. Handles 110% overload spikes without damage. Replace when efficiency drops below 90%.
Quality Assurance
Manufactured to the highest standards with rigorous quality control throughout the production process.
For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.
Fluidyne V2010 WF825265 Vane Pump | Replacement for Vickers/Eaton V2010-V20101F8S2S1CC12R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$768.40
Ready to order
No sales tax
Expected delivery Oct 14 - Oct 20
Get an exact shipping rate for your ZIP in the cart
Secure checkoutEncrypted card payments · pay over time with Affirm, Klarna or Afterpay
There are no reviews yet.