(800) 823-4937
sales@northernhydraulics.net
Fluidyne WF825886 V2010—direct replacement for Vickers/Eaton V2010-V20101F8S3S11CC12L. 2500 PSI, 1.19 in³/r. 100% compatible. In stock, ships same-day. Call (800) 823-4937.
| Manufacturer | Fluidyne Fluid Power |
|---|---|
| Pumps Max Pressure | 2,500 PSI |
| Pumps Rated Speed | 1,200 RPM |
| Pumps Max Speed | 4,000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Left-Hand (Counter-Clockwise) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Shipping weight | 32 lb |
| Package size | 10 × 10 × 10 in |
Stop losing $1,200 daily to costly hydraulic downtime. The FluiDyne V20101F8S3S11CC12L double vane pump delivers 11.0 GPM total flow and 100% Vickers interchangeability. Operators report 3-month payback after installation.
Technical Specifications
Flow Performance
At 11.0 GPM, the FluiDyne V20101F8S3S11CC12L matches industrial press and injection molding machine requirements. This double pump delivers 8 GPM (front) and 3 GPM (rear) to optimize multi-function circuits. Operators save 5-7 hours weekly compared to frequent Vickers repairs.
Efficiency & Durability
Performance stays consistent across 2,000–2,500 PSI pressure ranges. After 3,000 hours in service, efficiency remains at 92%. Comparable double vane pumps often drop to 80% by that point, forcing early replacement.
Installation
Installation takes 40 minutes with standard SAE J744 tools. The 4-bolt SAE “B” flange fits Vickers-equipped presses, balers, and extruders without adapters. Broad fluid compatibility prevents seal failures even with fire-resistant or synthetic fluids.
Features and Benefits
- Direct Vickers Compatibility: 100% matching model code and port locations eliminate guesswork. Reduces conversion errors by 0% for maintenance teams.
- Double Pump Design: 8 GPM and 3 GPM sections enable two-circuit operation. Users report 25% cycle time reduction on presses.
- Same-Day Shipping: Orders placed before 2 PM MST ship same day. Minimizes downtime by up to 72 hours for urgent breakdowns.
Operational Information
Cold starts succeed at 20°F. Continuous operation rated for 3,000 hours at 2,500 PSI. Handles 15% overload spikes with no seal or shaft damage. Replace when efficiency drops below 85%.
Quality Assurance
Manufactured to the highest standards with rigorous quality control throughout the production process.
For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.
Fluidyne V2010 WF825886 Vane Pump | Replacement for Vickers/Eaton V2010-V20101F8S3S11CC12L 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$768.40
Ready to order
No sales tax
Expected delivery Oct 19 - Oct 23
Get an exact shipping rate for your ZIP in the cart
Secure checkoutEncrypted card payments · pay over time with Affirm, Klarna or Afterpay
works great
Dropped this in place of the old Vickers on our log splitter and it fired right up, no leaks, no fuss. Thing's been running solid for a few weeks now under pretty heavy use.
Recieved it fast and it matched up to the old unit without any issues. Minor wait on shipping but nothing bad. Would order from these guys again.
Pump itself seems well built and pressure is where it should be, but the shaft fit was just a hair tight and I had to do a little work to get it seated properly. Not a huge deal but worth knowing. Does the job once its in there.