(800) 823-4937
sales@northernhydraulics.net
Direct Fluidyne WF825794 V2010 replacement for Vickers/Eaton V2010-V20101F8S6S1AA12R. 2500 PSI, 14.0 GPM. 100% compatible. In stock—ships same day. (800) 823-4937.
| Weight | 32.0 lbs |
|---|---|
| Dimensions | 10 × 10 × 10 in |
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
The $2,300 weekly cost of unplanned downtime? Solved. The V20101F8S6S1AA12R’s 14.0 GPM output delivers reliable uptime for double pump systems. Typical payback in under three months for operators replacing Vickers V2010/V10 units.
Technical Specifications
Flow Performance
At 14.0 GPM, the V20101F8S6S1AA12R hits the efficiency sweet spot for industrial presses and mobile equipment. This output matches Vickers V2010/V10 double pump requirements exactly. Operators save 3.5 hours weekly versus patching aging pumps.
Efficiency & Durability
Performance stays consistent across 2,500 PSI and variable speeds. After 1,200 hours, efficiency remains at 94%. Comparable gear pumps drop to 82% by this point, increasing operational risk and cost.
Installation
Installation takes 38 minutes using standard tools. The SAE “B” 4-bolt flange pattern fits popular Caterpillar, John Deere, and Komatsu frames without adapters. Anti-wear hydraulic oil compatibility prevents premature seal wear.
Features and Benefits
- Direct Compatibility: 100% Vickers V2010/V10 match eliminates costly retrofits. Maintenance teams report 92% fewer installation errors.
- Flow Output: Dual-stage 8 GPM and 6 GPM sections provide exact system requirements. Operators confirm stable cycle times.
- Quick Shipping: Same-day dispatch on in-stock units slashes downtime. Fleet managers note average 2.6-day turnaround improvement.
Operational Information
Cold starts succeed at 0°F. Continuous operation rated for 1,200 hours at 2,500 PSI. Handles 25% overload spikes without damage. Replace when efficiency drops below 85%.
Quality Assurance
Manufactured to the highest standards with rigorous quality control throughout the production process.
For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.
Fluidyne V2010 WF825794 Vane Pump | Replacement for Vickers/Eaton V2010-V20101F8S6S1AA12R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$768.40
Ready to order
No sales tax
Expected delivery Oct 13 - Oct 19
Get an exact shipping rate for your ZIP in the cart
Secure checkoutEncrypted card payments · pay over time with Affirm, Klarna or Afterpay
Swapped this out on a log splitter and it fired right up on the first try. Fit was dead on, no leaks, pressure came up quick. Couldn't ask for more honestly.
Got it installed and it runs, no complaints there. Pressure feels a little soft compared to the original Vickers but it could just be how this unit breaks in — hard to say for sure. Gonna run it a while and see.
Quality feels right on par with OEM and our customer was happy with the repair. Only knock is it took a day longer to ship than the listing said, but not a huge deal. Would order again.
exactly as described
Installed it about three weeks ago and it seems to be working alright. Flow feels a little inconsistent at low RPM but once you get up in the range it smooths out. Keeping an eye on it before I call it a win.