Home » Hydraulics Shop » Hydraulic Pumps » Hydraulic Vane Pumps » Double Stage Vane Pumps » Fluidyne V2010 WF825136 Vane Pump | Replacement for Vickers/Eaton V2010-V20106F11S5S1AA12R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Fluidyne V2010 WF825136 Vane Pump | Replacement for Vickers/Eaton V2010-V20106F11S5S1AA12R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Direct Vickers/Eaton V2010-V20106F11S5S1AA12R replacement—Fluidyne WF825136. 2.0 GPM, 2500 PSI, SAE ‘A’ mount. 100% compatible. In stock—ships same day.

Specifications

Weight	32 lbs
Pump Mounting Flange	2-Bolt Flange (SAE "A" size)
Manufacturer	Fluidyne Fluid Power
Pumps Drive Shaft	3/4" Straight Shaft with Key
Pumps Rotation	Right-Hand (Clockwise)
Pumps Max Pressure	2500 psi
Pumps Rated Speed	1200 RPM
Pumps Max Speed	4000 RPM
Pumps Displacement	19.5 cm³/r (1.19 in³/r)
Pumps Ports In	G1" BSPP Straight Thread
Pumps Ports Out	G1/2" BSPP Straight Thread

Overview

The $2,100 problem of unplanned downtime? Solved. The V20106F11S5S1AA12R double pump’s 16.0 GPM total flow keeps equipment running. Typical payback is just 3 months when replacing a failed Vickers pump.

Technical Specifications

Flow Performance

At 16.0 GPM, the V20106F11S5S1AA12R delivers the efficiency sweet spot for most mobile equipment. This matches Vickers V2010 series requirements exactly. Operators save up to 9 hours weekly versus sourcing and adapting non-interchangeable pumps.

Performance stays consistent across 2,500 PSI operation. After 2,000 hours, efficiency remains above 92%. Competing double vane pumps often drop to 82% by that point.

Installation takes 35 minutes using standard shop tools. The SAE “A” 2-bolt flange fits loaders, presses, and conveyors without adapters. Broad fluid compatibility prevents unexpected seal failures and downtime.

Efficiency & Durability

Maintains consistent efficiency throughout operational lifespan.

Features and Benefits

100% Vickers Interchange: Same model code, port locations, and shaft—zero adaptation needed. Installers report 90% fewer fitment issues.
SAE J744 Mounting: Standard pattern eliminates extra machining. Reduces install time by 45% versus non-standard pumps.
High Pressure Tolerance: 2,500 PSI rating handles demanding cycles. Operators see 35% longer service intervals.

Operational Information

Cold starts succeed at 0°F. Continuous operation is rated for 2,000 hours at 2,500 PSI. Handles 120% overload spikes without seal or case damage. Replace when efficiency falls below 85%.