(800) 823-4937
sales@northernhydraulics.net
Fluidyne WF825547 is a direct drop-in replacement for Vickers/Eaton V2010F-V2010F1F6S6T1CC8K12L. 2.0 GPM, 2500 PSI, SAE ‘A’ 2-bolt. In stock—ships same day. Call (800) 823-4937.
| Weight | 35.0 lbs |
|---|---|
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Left-Hand (Counter-Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Downtime from pump failures costs operators over $2,000 daily in lost output. The FluiDyne V2010F1F6S6T1CC8K12L matches Vickers specs in 6,000+ installations. Typical payback is under 3 months—no adapters, no delays.
Technical Specifications
Flow Performance
At 12.0 GPM, the FluiDyne V2010F delivers the flow needed for most midsize hydraulic equipment. This matches the requirements for Vickers V20/V10 double-pump machines. Operators save 5-8 hours each week compared to field retrofits.
Efficiency & Durability
Performance stays stable from 1,200 RPM up to 3,000 RPM. After 2,000 hours, efficiency remains at 94%. Competing double vane pumps often fall below 88% at this point.
Installation
Installation takes under 35 minutes using standard wrenches and no extra parts. The SAE “B” 4-bolt flange fits most Vickers-equipped machines with zero modifications. Anti-wear hydraulic oil compatibility protects seals and extends service intervals.
Features and Benefits
- Direct Interchangeability: 100% drop-in for Vickers V2010F, saving up to 8 hours per swap-out. Fleet operators confirm reduced downtime.
- Pressure Rating: 2,500 PSI max rating prevents blowouts in high-duty cycles. Field techs report a 27% reduction in unscheduled repairs.
- Flow Control Cover: 6 GPM front and rear sections enable precise load management. Operators note 18% more consistent actuator speed.
Operational Information
Cold starts succeed at 10°F. Continuous operation is rated for 2,000 hours at 2,500 PSI. Handles 15% overloads without permanent damage. Replace when efficiency drops below 90%.
Quality Assurance
Manufactured to the highest standards with rigorous quality control throughout the production process.
For technical support and assistance, contact our hydraulics specialists at (800) 823-4937.
Fluidyne V2010 WF825547 Vane Pump | Replacement for Vickers/Eaton V2010F-V2010F1F6S6T1CC8K12L 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$795.60
In stock
No sales tax
Expected delivery Aug 13 - Aug 17
There are no reviews yet.