(800) 823-4937
sales@northernhydraulics.net
| Weight | 18.0 lbs |
|---|---|
| Dimensions | 5 × 5 × 5 in |
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key (1.75" extension) |
| Pumps Rotation | Left-Hand (Counter-Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 2600 RPM |
| Pumps Displacement | 42.6 cm³/r (2.60 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Product Selection Guide
These FluiDyne V20 Series hydraulic vane pump models differ primarily in flow rate, displacement, shaft configuration, port orientation, and rotation direction. All are direct Vickers replacements, fully SAE J744 compatible, and rated to 2500 PSI, but each model is optimized for specific hydraulic system requirements.
?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.
| Model Number | Flow Rate | Max Pressure | Displacement | Mounting |
|---|---|---|---|---|
| WF8202195 (Current) | 13.5 GPM | 2500 PSI | 42.6 cm³/r (2.60 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF8202153 | 6.2 GPM | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF820217 | 9.4 GPM | 2500 PSI | 29.7 cm³/r (1.81 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF8202113 | 5.7 GPM | 2500 PSI | 18.0 cm³/r (1.10 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF8202160 | 8.4 GPM | 2500 PSI | 26.6 cm³/r (1.62 in³/r) | 2-Bolt Flange (SAE “A” size) |
Key Differences
Flow Rate
Difference: Models range from 5.7 GPM (WF8202113) up to 13.5 GPM (WF8202195)
Selection Guide: Select higher GPM models for systems demanding greater hydraulic output, such as larger actuators or faster cycle times. For more options, see our single stage vane pumps applications selection. Lower GPM is ideal for precision applications or smaller cylinders.
Displacement
Difference: Displacement varies from 1.10 in³/rev (WF8202113) to 2.60 in³/rev (WF8202195)
Selection Guide: Larger displacement models deliver more fluid per revolution, suitable for higher flow at lower speeds. Choose based on your system’s desired flow and available drive speed.
Shaft Configuration
Difference: WF8202195 uses a 9-tooth splined shaft (1.25″ extension), while others use 3/4″ straight keyed shafts (1.75″ or 2.66″ extension)
Selection Guide: Splined shafts (WF8202195) are better for high-torque, heavy-duty coupling. Straight keyed shafts suit standard applications with less torque demand.
Port Position
Difference: WF8202195, WF8202153, WF820217 have ports opposite from inlet (180°). WF8202113 and WF8202160 have ports 90° counter-clockwise from inlet.
Selection Guide: Use 180° port models for straightforward hose routing; 90° port models fit better in compact or space-constrained installations.
Rotation Direction
Difference: WF8202195 and WF8202113 are left-hand (CCW); others are right-hand (CW)
Selection Guide: Match pump rotation to your drive motor’s direction to ensure proper function; select left- or right-hand as required.
Inlet/Outlet Port Size
Difference: WF8202195, WF8202153, WF820217: 1-1/4″ NPT inlet, 1-1/16″-12 or 3/4″ NPT outlet. WF8202113, WF8202160: 1″ NPT inlet, 3/4″ NPT outlet.
Selection Guide: Larger ported models accommodate higher flow; choose port size to match your system plumbing and minimize flow restriction.
Maximum Speed
Difference: Models rated from 2400 RPM (WF8202195) up to 3400 RPM (WF8202153)
Selection Guide: Higher speed ratings allow more flexibility with variable-speed drives. Select accordingly if your system runs above 2400 RPM.
Quick Selection Guide
If you need: Highest flow and displacement for large actuators or rapid operation (13+ GPM, 2.6 in³/rev)
Choose: WF8202195
Because: It provides the maximum flow rate and displacement in this group, plus a heavy-duty splined shaft for robust applications.
If you need: Compact pump with moderate flow (8.4 GPM, 1.62 in³/rev) and right-hand rotation
Choose: WF8202160
Because: It balances flow capacity and compact port orientation (90°), ideal for mid-sized systems in tight spaces.
If you need: Lowest flow and displacement for precise or low-volume circuits (5.7 GPM, 1.10 in³/rev)
Choose: WF8202113
Because: This model delivers precise control for small cylinders or metering applications, with left-hand rotation.
If you need: Moderate flow and highest speed rating (6.2 GPM, 3400 RPM)
Choose: WF8202153
Because: It supports higher drive speeds and is suitable for applications where pump RPM exceeds 2400.
If you need: General-purpose, mid-flow (9.4 GPM, 1.81 in³/rev), right-hand rotation
Choose: WF820217
Because: It fits standard hydraulic systems needing a balance between flow and efficiency.
Compatibility: All models are direct Vickers replacements with 100% interchangeability, SAE ‘A’ 2-bolt flange mounting, and G1″/G1/2″ BSPP ports. Select based on flow, displacement, rotation, and shaft/port requirements.
For application-specific guidance or help with Vickers cross-referencing, call Northern Hydraulics at (800) 823-4937, Mon-Fri, 7 AM – 5 PM MST, or browse our full range of hydraulic pumps for more solutions.
Compatibility & Applications
Direct Replacement Information
The Fluidyne WF8202195 is a direct, 100% interchangeable replacement for Vickers WF8202195 pumps (see also: V201P13P39C11R – FluiDyne V20 Pump for related models), meeting SAE J744 mounting standards and designed for systems requiring 42.6 cm³/r (2.60 in³/r) displacement and up to 2500 PSI operation..
- Mounting Pattern: SAE ‘A’ 2-bolt
- Inlet Port: G1″ BSPP
- Outlet Port: G1/2″ BSPP
Common Applications
Commonly used in mobile hydraulics, auxiliary power units, compact equipment. For similar applications, consider the V201P13P40C11R – FluiDyne V20 Pump.
- See also: pumps with integral valves for systems needing built-in control.
- mobile hydraulics
- auxiliary power units
- compact equipment
Important: Verify pump model WF8202195 matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937. Same-day shipping available on in-stock items. Volume pricing starts at 4 units. All Fluidyne pumps include a 12-month manufacturer warranty.
Purchasing Information
Availability & Delivery
Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.
For current availability on WF8202195, call (800) 823-4937.
Warranty & Protection
- 12-month warranty covers manufacturing defects
- 30-day return window for unopened units
- Free technical verification before ordering
- Each pump pressure tested before shipment
Ordering Options
Order online for immediate processing. Phone orders welcome at (800) 823-4937.
Net 30 terms available for approved accounts.
Volume pricing available on orders of 4 or more units.
Support & Documentation
- Installation guide included with every shipment (see vane pumps specifications technical documentation)
- Technical drawings and specifications available
- Cross-reference guides for common brands, including Vickers replacement pumps specifications
- Phone support: Monday-Friday, 7 AM – 5 PM MST
Questions? Call our specialists: (800) 823-4937 or view our single stage vane pumps for additional options.
Fluidyne V20 WF8202195 Vane Pump | Replacement for Vickers/Eaton V201P13S62A11L 4.3 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$299.20
Ready to order
No sales tax
Expected delivery Oct 14 - Oct 20
Get an exact shipping rate for your ZIP in the cart
Secure checkoutEncrypted card payments · pay over time with Affirm, Klarna or Afterpay
There are no reviews yet.