Home » Hydraulics Shop » Hydraulic Pumps » Hydraulic Vane Pumps » Single Stage Vane Pumps » Fluidyne V20 WF820516 Vane Pump | Replacement for Vickers/Eaton V201P8S1B11R 2.7 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Fluidyne V20 WF820516 Vane Pump | Replacement for Vickers/Eaton V201P8S1B11R 2.7 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft

Fluidyne V20 WF820516 Vane Pump | Replacement for Vickers/Eaton V201P8S1B11R 2.7 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft - Image 2

Specifications

Weight	18 lbs
Pump Mounting Flange	2-Bolt Flange (SAE "A" size)
Manufacturer	Fluidyne Fluid Power
Pumps Drive Shaft	3/4" Straight Shaft with Key
Pumps Rotation	Right-Hand (Clockwise)
Pumps Max Pressure	2500 psi
Pumps Rated Speed	1200 RPM
Pumps Max Speed	3200 RPM
Pumps Displacement	26.6 cm³/r (1.62 in³/r)
Pumps Ports In	G1" BSPP Straight Thread
Pumps Ports Out	G1/2" BSPP Straight Thread

Product Selection Guide

These FluiDyne V20 Series hydraulic vane pumps differ primarily in flow rate, displacement, maximum pressure, maximum speed, shaft type, port orientation, and port threading. For a full selection of hydraulic pumps and related equipment, explore our product family. All models are 100% Vickers interchangeable and follow SAE ‘A’ 2-bolt mounting, making them direct replacements for Vickers replacement pumps. Selection should be based on your required flow, system pressure, port layout, and shaft compatibility. To compare additional single stage vane pumps, browse our full lineup.

?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.

Model Number	Flow Rate	Max Pressure	Displacement	Mounting
WF820516 (Current)	8.4 GPM	2500 PSI	26.6 cm³/r (1.62 in³/r)	2-Bolt Flange (SAE “A” size)
WF820519	6.2 GPM	2500 PSI	19.5 cm³/r (1.19 in³/r)	2-Bolt Flange (SAE “A” size)
WF820511	12.5 GPM	2500 PSI	39.5 cm³/r (2.41 in³/r)	2-Bolt Flange (SAE “A” size)
WF8201811	13.5 GPM	2500 PSI	42.6 cm³/r (2.60 in³/r)	2-Bolt Flange (SAE “A” size)
WF8201212	13.5 GPM	2500 PSI	42.6 cm³/r (2.60 in³/r)	2-Bolt Flange (SAE “A” size)

Key Differences

Flow Rate

Difference: Flow rates at 1200 RPM range from 6.2 GPM (WF820519) up to 13.5 GPM (WF8201811 and WF8201212).

Selection Guide: Select WF820519 for low-flow circuits or pilot systems; choose WF8201811 or WF8201212 when higher flow is needed for larger actuators or faster cycle times.

Displacement

Difference: Displacement increases from 1.19 in³/rev (WF820519) to 2.60 in³/rev (WF8201811 and WF8201212).

Selection Guide: Match displacement to your system’s required volume per revolution; higher displacement models deliver more fluid per revolution.

Maximum Pressure

Difference: WF820516 and WF820519 support up to 2500 PSI, while WF820511, WF8201811, and WF8201212 are rated up to 2200 PSI.

Selection Guide: For applications requiring pressures above 2200 PSI, choose WF820516 or WF820519.

Maximum Speed

Difference: WF820519 supports up to 3400 RPM, while WF820516 allows 2800 RPM; WF820511, WF8201811, and WF8201212 are rated to 2400 RPM.

Selection Guide: Select WF820519 for high-speed applications. For standard speeds, any model will suffice.

Shaft Type and Extension

Difference: WF820516, WF820519, and WF820511 use a 3/4″ straight shaft with key (2.66″ extension). WF8201811 and WF8201212 have a 3/4″ straight shaft with a shorter (1.75″) extension. WF8201212 uniquely offers a 7/8″ threaded shaft with Woodruff key.

Selection Guide: Match shaft type and extension to your coupling. Use WF8201212 if a threaded shaft is required.

Port Position

Difference: WF820519 and WF8201811 have ports inline with the inlet (0°), WF820516 is at 90° counter-clockwise, and WF820511 and WF8201212 are opposite from inlet (180°).

Selection Guide: Choose port orientation that best fits your piping layout—inline for straight runs, 90° or 180° for compact or angled installations.

Port Thread Type

Difference: WF820516, WF820519, and WF8201811 use NPT inlets; WF820511 uses a 1-5/8″-12 straight thread inlet. Outlets vary between NPT and straight thread depending on model.

Selection Guide: Select a model that matches your required port threading to minimize adapters and installation complexity.

Quick Selection Guide

If you need: Lowest possible flow (6.2 GPM) at high speed and max pressure (2500 PSI, 3400 RPM)

Choose: WF820519

Because: Ideal for low-flow, high-speed circuits or pilot/auxiliary functions.

If you need: Intermediate flow (8.4 GPM) at up to 2500 PSI and 2800 RPM

Choose: WF820516

Because: Balances moderate flow with high pressure and standard shaft/port options.

If you need: Higher flow (12.5 GPM) with standard shaft and 180° port orientation

Choose: WF820511

Because: Suited for mid- to high-flow circuits needing straight thread inlet/outlet.

If you need: Maximum flow (13.5 GPM) with compact shaft extension

Choose: WF8201811

Because: Provides highest flow with inline ports and shorter shaft for space-constrained installations.

If you need: Maximum flow (13.5 GPM) and require a threaded shaft with Woodruff key

Choose: WF8201212

Because: Best for systems with threaded drive connections and 180° port orientation.

Compatibility: All models are direct Vickers replacements, fully interchangeable, and use the SAE J744 ‘A’ 2-bolt flange mounting. Most models feature G1″/G1/2″ BSPP ports for simplified plumbing.

For application-specific pump selection, cross-referencing, or troubleshooting, call Northern Hydraulics’ hydraulic specialists at (800) 823-4937, Mon-Fri, 7 AM – 5 PM MST. For broader system needs, see our full line of vane pumps.

Purchasing Information

Availability & Delivery

Most hydraulic vane pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.

For current availability on WF820516, call (800) 823-4937.

Warranty & Protection

12-month warranty covers manufacturing defects
30-day return window for unopened units
Free technical verification before ordering
Each pump pressure tested before shipment

Ordering Options

Order online for immediate processing. Phone orders welcome at (800) 823-4937.

Net 30 terms available for approved accounts.

Volume pricing available on orders of 4 or more units. For units with integrated control options, check our pumps with integral valves category.

Support & Documentation

Installation guide included with every shipment
Technical drawings and specifications available—reference our single stage vane pump specs for detailed engineering data
Cross-reference guides for common brands
Phone support: Monday-Friday, 7 AM – 5 PM MST

Questions? Call our specialists: (800) 823-4937

Compatibility & Applications

Direct Replacement Information

The WF820516 from Fluidyne replaces Vickers WF820516 units in systems requiring a displacement of 26.6 cm³/r (1.62 in³/r), with a maximum operating pressure of 2500 PSI and rated speed of 1200 RPM. If you require an alternative with similar specs, see our V201P8P10D11R – FluiDyne V20 Pump. This direct replacement offers 100% interchangeability and adheres to SAE J744 mounting standards, ensuring seamless integration..

Mounting Pattern: SAE ‘A’ 2-bolt
Inlet Port: G1″ BSPP
Outlet Port: G1/2″ BSPP

Common Applications

Commonly used in agricultural equipment, construction machinery, and utility vehicles. View additional real-world application examples for Vickers replacement pumps.

agricultural equipment
construction machinery
utility vehicles

Important: Verify pump model WF820516 matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937. For more options in this series, view the V201P13P3A11R – FluiDyne V20 Pump.

SKU: WF820516

Fluidyne V20 WF820516 Vane Pump | Replacement for Vickers/Eaton V201P8S1B11R 2.7 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Name: Fluidyne V20 WF820516 Vane Pump | Replacement for Vickers/Eaton V201P8S1B11R 2.7 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft
Brand: Northern Hydraulics Inc.
SKU: WF820516
Price: 299.2 USD
Availability: InStock

$299.20

In stock

No sales tax

Expected delivery Feb 20 - Feb 24

1+ $ 299.20/piece

4+ $ 284.24/piece -5%

8+ $ 269.28/piece -10%

Looking for help or a discount?

Call (800) 823-4937

Reviews (0)

Rating & Reviews (

There are no reviews yet.

5 star

4 star

3 star

2 star

1 star