(800) 823-4937
sales@northernhydraulics.net
| Weight | 18.0 lbs |
|---|---|
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key (1.75" extension) |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 3000 RPM |
| Pumps Displacement | 29.7 cm³/r (1.81 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Product Selection Guide
These FluiDyne V20 Series single stage vane pump models differ primarily in flow rate, displacement, rotation direction, shaft type, port positioning, and maximum speed. All models are direct Vickers replacements, fully SAE J744 compliant, and share 2-bolt SAE ‘A’ mounting for easy interchangeability. If you need to compare all vane pumps or explore additional options, see our full selection.
?? Important: The specifications shown are for reference and comparison purposes. For a complete overview of available hydraulic pumps, refer to our main product family page. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.
| Model Number | Flow Rate | Max Pressure | Displacement | Mounting |
|---|---|---|---|---|
| WF820299 (Current) | 9.4 GPM | 2500 PSI | 29.7 cm³/r (1.81 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF8202913 | 6.2 GPM | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF820297 | 9.4 GPM | 2500 PSI | 29.7 cm³/r (1.81 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF8202907 | 8.4 GPM | 2500 PSI | 26.6 cm³/r (1.62 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF8202915 | 11.5 GPM | 2500 PSI | 36.3 cm³/r (2.22 in³/r) | 2-Bolt Flange (SAE “A” size) |
Key Differences
Flow Rate & Displacement
Difference: Flow rates at 1200 RPM range from 6.2 GPM (WF8202913) up to 11.5 GPM (WF8202915), with corresponding displacement from 19.5 cm³/r (1.19 in³/r) to 36.3 cm³/r (2.22 in³/r).
Selection Guide: Select lower displacement models like WF8202913 for smaller actuators or precise flow control; choose higher displacement models (WF8202915) for faster cylinder speeds or higher-volume systems.
Rotation Direction
Difference: WF820299 and WF820297 are right-hand (clockwise) rotation; WF8202907 and WF8202915 are left-hand (counter-clockwise).
Selection Guide: Match pump rotation to your drive motor direction—use right-hand for standard clockwise drives, left-hand for counter-clockwise.
Shaft Type & Length
Difference: Shafts vary: WF820299 and WF820297 use a 3/4″ straight keyed shaft (2.66″ extension), WF8202907 has a 9-tooth splined shaft (1.25″ extension), others may have special configurations.
Selection Guide: Choose straight keyed shafts for standard couplings; opt for splined shafts (WF8202907) in high-torque or misalignment-prone setups. For systems requiring intermediate displacement and similar specs, consider the V201P8P10D11R FluiDyne V20 Pump.
Port Position and Type
Difference: Port positions are either inline with inlet (0°) or opposite (180°). Port thread types vary between NPT and BSPP, as well as port sizes.
Selection Guide: Inline (0°) ports (WF8202913, WF820297, WF8202915) simplify straight plumbing; opposite (180°) ports (WF820299, WF8202907) suit installations needing separation. Check thread types and sizes for direct hose compatibility.
Maximum Speed
Difference: Max speeds range from 2500 RPM (WF8202915) up to 3000 RPM (WF8202913).
Selection Guide: For higher-speed applications, select models with higher max RPM (WF8202913); for lower speed, high-displacement needs, use WF8202915.
Quick Selection Guide
If you need: Precise, low-flow performance (6.2 GPM, 1.19 in³/r, highest RPM limit)
Choose: WF8202913
Because: Ideal for smaller cylinders, fine control, or high-speed drives up to 3000 RPM.
If you need: Standard 9 GPM output with clockwise rotation and opposite porting
Choose: WF820299
Because: Best for typical 9 GPM applications needing right-hand rotation and 180° port separation.
If you need: Standard 9 GPM output with inline ports
Choose: WF820297
Because: Matches right-hand rotation but provides inline (0°) porting for straight-through installations.
If you need: Mid-range flow (8.4 GPM), left-hand (CCW) rotation, and splined shaft
Choose: WF8202907
Because: Suited for high-torque, counter-clockwise drive systems with space constraints.
If you need: Maximum flow (11.5 GPM), left-hand rotation, and high displacement
Choose: WF8202915
Because: Best for large hydraulic cylinders or systems requiring the highest volume at 1200 RPM and CCW drive.
Compatibility: All pumps use SAE ‘A’ 2-bolt flange mounting and G1″/G1/2″ BSPP ports for direct Vickers replacement pumps interchangeability. Each is covered by a 12-month manufacturer warranty and volume pricing starts at 4 units. Same-day shipping available on in-stock models.
For detailed pump selection, cross-referencing, or troubleshooting, Northern Hydraulics’ specialists are available Mon-Fri, 7 AM – 5 PM MST at (800) 823-4937. You may also want to review our pumps with integral valves for advanced system requirements.
Purchasing Information
Availability & Delivery
Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.
For current availability on WF820299, call (800) 823-4937.
Warranty & Protection
- 12-month warranty covers manufacturing defects
- 30-day return window for unopened units
- Free technical verification before ordering
- Each pump pressure tested before shipment
Ordering Options
Order online for immediate processing. Phone orders welcome at (800) 823-4937.
Net 30 terms available for approved accounts. For those purchasing multiple units, see our volume pricing or browse all hydraulic pumps to compare options.
Volume pricing available on orders of 4 or more units.
Support & Documentation
- Installation guide included with every shipment
- Technical drawings and specifications available
- Cross-reference guides for common brands
- Phone support: Monday-Friday, 7 AM – 5 PM MST
Questions? Call our specialists: (800) 823-4937 or explore more Vickers replacement pumps for direct interchangeability.
Compatibility & Applications
Direct Replacement Information
The Fluidyne WF820299 directly replaces Vickers WF820299 pumps in systems requiring 29.7 cm³/r (1.81 in³/r) displacement and 2500 PSI maximum pressure. This model offers 100% interchangeability, meeting all SAE J744 mounting standards for quick, direct replacement..
- Mounting Pattern: SAE ‘A’ 2-bolt
- Inlet Port: G1″ BSPP
- Outlet Port: G1/2″ BSPP
Common Applications
Commonly used in mobile hydraulics applications, auxiliary power units, compact equipment. For additional real-world examples and application case studies, explore our V201P13P3A11R – FluiDyne V20 Pump used in similar mobile and industrial setups.
- mobile hydraulics
- auxiliary power units
- compact equipment
Important: Verify pump model WF820299 matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.
Fluidyne V20 WF820299 Vane Pump | Replacement for Vickers/Eaton V201P9P1A11R 3.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$299.20
In stock
No sales tax
Expected delivery Sep 12 - Sep 16
There are no reviews yet.