Home » Hydraulics Shop » Hydraulic Pumps » Hydraulic Vane Pumps » Single Stage Vane Pumps » Fluidyne V20 WF820487 Vane Pump | Replacement for Vickers/Eaton V201P9P1C11L 3.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Fluidyne V20 WF820487 Vane Pump | Replacement for Vickers/Eaton V201P9P1C11L 3.0 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft

Fluidyne V20 WF820487 Vane Pump | Replacement for Vickers/Eaton V201P9P1C11L 3.0 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft - Image 2

Specifications

Weight	18 lbs
Pump Mounting Flange	2-Bolt Flange (SAE "A" size)
Manufacturer	Fluidyne Fluid Power
Pumps Drive Shaft	3/4" Straight Shaft with Key (1.75" extension)
Pumps Rotation	Left-Hand (Counter-Clockwise)
Pumps Max Pressure	2500 psi
Pumps Rated Speed	1200 RPM
Pumps Max Speed	3000 RPM
Pumps Displacement	29.7 cm³/r (1.81 in³/r)
Pumps Ports In	G1" BSPP Straight Thread
Pumps Ports Out	G1/2" BSPP Straight Thread

Product Selection Guide

These FluiDyne V20 Series vane pumps are all direct Vickers replacements, offering standardized SAE ‘A’ 2-bolt mounting and similar port sizes, but differ mainly in flow rate, displacement, shaft type, rotation, port orientation, and special cover features. Selecting the right model depends on your flow/pressure demands, shaft compatibility, rotation direction, and any need for integral flow control. For a full overview of available hydraulic pumps, explore our main product selection.

?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.

Model Number	Flow Rate	Max Pressure	Displacement	Mounting
WF820487 (Current)	9.4 GPM	2500 PSI	29.7 cm³/r (1.81 in³/r)	2-Bolt Flange (SAE “A” size)
WF820488	9.4 GPM	2500 PSI	29.7 cm³/r (1.81 in³/r)	2-Bolt Flange (SAE “A” size)
WF820481	9.4 GPM	2500 PSI	29.7 cm³/r (1.81 in³/r)	2-Bolt Flange (SAE “A” size)
WF820489	11.5 GPM	2500 PSI	36.3 cm³/r (2.22 in³/r)	2-Bolt Flange (SAE “A” size)
WF8201811	13.5 GPM	2500 PSI	42.6 cm³/r (2.60 in³/r)	2-Bolt Flange (SAE “A” size)

Key Differences

Flow Rate & Displacement

Difference: WF820487, WF820488, and WF820481 deliver 9–9.4 GPM at 1.81 in³/rev; WF820489 increases to 11.5 GPM at 2.22 in³/rev; WF8201811 delivers the highest at 13.5 GPM/2.60 in³/rev.

Selection Guide: For higher system demand, choose WF8201811 (13.5 GPM); for moderate demand, select WF820489 (11.5 GPM); for standard flows, use WF820487, WF820488, or WF820481.

Shaft Type

Difference: WF820487 and WF820481 use a 3/4″ straight keyed shaft; WF820488 and WF820489 have an 11-tooth splined shaft; WF8201811 uses a special shaft (Code 39).

Selection Guide: Use splined shaft models (WF820488, WF820489) for higher torque or spline couplings; straight keyed shaft models (WF820487, WF820481) suit standard keyed couplings.

Rotation Direction

Difference: WF820487, WF820488, WF820489 are left-hand (counter-clockwise); WF820481, WF8201811 are right-hand (clockwise).

Selection Guide: Match the rotation to your drive motor—select left-hand for counter-clockwise drives, right-hand for clockwise.

Port Orientation

Difference: WF820487, WF820488, WF8201811 have inline ports (0°); WF820481 has 90° clockwise ports; WF820489 has 90° counter-clockwise ports.

Selection Guide: Choose inline for straightforward plumbing; 90° ports suit installations with limited space or specific hose routing needs.

Pump Cover/Features

Difference: WF820489 features a flow control cover (includes relief valve and flow control); others have standard covers. For more options with integrated control, explore our pumps with integral valves.

Selection Guide: Use WF820489 when you need integrated flow and pressure control to simplify your circuit.

Maximum Pressure & Speed

Difference: Most models rated 2500 PSI and 2800 RPM max; WF8201811 maxes at 2200 PSI and 2400 RPM; WF820489 (with flow control) is limited to 2500 RPM.

Selection Guide: For highest pressure and speed demands, avoid WF8201811 and WF820489—choose other models for full 2500 PSI/2800 RPM operation.

Quick Selection Guide

If you need: Standard 9 GPM pump with left-hand rotation and keyed shaft

Choose: WF820487

Because: Matches most common Vickers V20 applications with direct interchangeability.

If you need: Standard 9 GPM, left-hand rotation, high-torque or splined coupling

Choose: WF820488

Because: Offers same performance as WF820487 but with a splined shaft for high-torque or spline couplings.

If you need: Standard 9 GPM, right-hand rotation, 90° port orientation

Choose: WF820481

Because: Best for systems needing clockwise rotation and side port configuration. Alternatively, for similar applications with slightly lower displacement, see our V201P8P10D11R model.

If you need: Higher flow (11.5 GPM), left-hand rotation, integrated flow control

Choose: WF820489

Because: Ideal for circuits that require controlled flow and built-in pressure relief.

If you need: Maximum flow (13.5 GPM), right-hand rotation

Choose: WF8201811

Because: Provides the highest output for demanding applications, with right-hand rotation. For related high-performance models, see the V201P13P3A11R pump.

Compatibility: All models are 100% interchangeable with Vickers V20 series, use SAE J744 ‘A’ 2-bolt mounting, G1″/G1/2″ BSPP ports, and fit standard hydraulic system footprints for easy integration.

For model selection assistance, troubleshooting, or cross-referencing, Northern Hydraulics’ team of hydraulic specialists is available Mon-Fri, 7 AM – 5 PM MST. See our full line of single stage vane pumps for additional options, or call us at (800) 823-4937.

Compatibility & Applications

Direct Replacement Information

For users needing a direct Vickers WF820487 replacement, this Fluidyne V20 series pump is fully interchangeable and delivers a displacement of 29.7 cm³/r (1.81 in³/r) at pressures up to 2500 PSI. It is designed for reliable performance in hydraulic circuits operating at rated speeds up to 1200 RPM, maintaining flow and pressure standards set by the original Vickers specification..

Mounting Pattern: SAE ‘A’ 2-bolt
Inlet Port: G1″ BSPP
Outlet Port: G1/2″ BSPP

Common Applications

Commonly used in lifting equipment, conveyor systems, processing machinery, and other industrial hydraulic systems. See additional Vickers replacement pumps for a broader list of applications.

lifting equipment
conveyor systems
processing machinery

Important: Verify pump model WF820487 matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.

Purchasing Information

Availability & Delivery

Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.

For current availability on WF820487, call (800) 823-4937.

Warranty & Protection

12-month warranty covers manufacturing defects
30-day return window for unopened units
Free technical verification before ordering
Each pump pressure tested before shipment

Ordering Options

Order online for immediate processing, or browse our complete hydraulic pumps range. Phone orders welcome at (800) 823-4937.

Net 30 terms available for approved accounts.

Volume pricing available on orders of 4 or more units.

Support & Documentation

Installation guide included with every shipment
Technical drawings and specifications available
Cross-reference guides for common brands
Phone support: Monday-Friday, 7 AM – 5 PM MST

For more detailed technical resources and to review our full range of vane pumps, contact us. Questions? Call our specialists: (800) 823-4937

SKU: WF820487

Fluidyne V20 WF820487 Vane Pump | Replacement for Vickers/Eaton V201P9P1C11L 3.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Name: Fluidyne V20 WF820487 Vane Pump | Replacement for Vickers/Eaton V201P9P1C11L 3.0 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft
Brand: Northern Hydraulics Inc.
SKU: WF820487
Price: 299.2 USD
Availability: InStock