Home » Hydraulics Shop » Hydraulic Pumps » Hydraulic Vane Pumps » Single Stage Vane Pumps » Fluidyne V20 WF8202498 Vane Pump | Replacement for Vickers/Eaton V201R8P62A11L 2.7 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Fluidyne V20 WF8202498 Vane Pump | Replacement for Vickers/Eaton V201R8P62A11L 2.7 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft

Fluidyne V20 WF8202498 Vane Pump | Replacement for Vickers/Eaton V201R8P62A11L 2.7 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft - Image 2

Specifications

Weight	18 lbs
Pump Mounting Flange	2-Bolt Flange (SAE "A" size)
Manufacturer	Fluidyne Fluid Power
Pumps Drive Shaft	3/4" Straight Shaft with Key
Pumps Rotation	Left-Hand (Counter-Clockwise)
Pumps Max Pressure	2500 psi
Pumps Rated Speed	1200 RPM
Pumps Max Speed	3200 RPM
Pumps Displacement	26.6 cm³/r (1.62 in³/r)
Pumps Ports In	G1" BSPP Straight Thread
Pumps Ports Out	G1/2" BSPP Straight Thread

Product Selection Guide

These FluiDyne V20 Series vane pumps are all direct Vickers replacements with SAE ‘A’ 2-bolt mounting and G1″/G1/2″ BSPP straight-thread ports, but vary in flow rate, displacement, rotation, shaft type, port orientation, and inlet size. Selection hinges on your system’s required flow, pressure, rotation direction, and installation constraints. For a full range of hydraulic pumps and application-specific advice, see our product lineup.

?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.

Model Number	Flow Rate	Max Pressure	Displacement	Mounting
WF8202498 (Current)	8.4 GPM	2500 PSI	26.6 cm³/r (1.62 in³/r)	2-Bolt Flange (SAE “A” size)
WF8202442 \| V201P13P39C11R	13.5 GPM	2500 PSI	42.6 cm³/r (2.60 in³/r)	2-Bolt Flange (SAE “A” size)
WF8202488	13.5 GPM	2500 PSI	42.6 cm³/r (2.60 in³/r)	2-Bolt Flange (SAE “A” size)
WF8202461	6.2 GPM	2500 PSI	19.5 cm³/r (1.19 in³/r)	2-Bolt Flange (SAE “A” size)
WF8202497 \| V201P8P10D11R	8.4 GPM	2500 PSI	26.6 cm³/r (1.62 in³/r)	2-Bolt Flange (SAE “A” size)

Key Differences

Flow Rate & Displacement

Difference: WF8202461 delivers 6.2 GPM (1.19 in³/r), WF8202498 & WF8202497 provide 8.4 GPM (1.62 in³/r), WF8202442 & WF8202488 reach 13.5 GPM (2.60 in³/r), all at 1200 RPM.

Selection Guide: Select higher flow/displacement models (WF8202442, WF8202488) for applications requiring faster cylinder movement or higher output; choose lower flow (WF8202461) for precise, lower-demand systems. For other material handling or light industrial circuits, V201P13P3C11R applications is also a proven option.

Rotation Direction

Difference: WF8202461 and WF8202498 are Left-Hand (Counter-Clockwise); WF8202442, WF8202488, and WF8202497 are Right-Hand (Clockwise).

Selection Guide: Match rotation to your drive requirements—incorrect rotation can damage the pump or system.

Shaft Configuration

Difference: WF8202498 uses a 9-tooth splined shaft; others have 3/4″ straight shaft with key (some with longer extension).

Selection Guide: Select splined shaft (WF8202498) for higher torque applications or where splined coupling is required; straight keyed shafts fit standard keyed couplings.

Port Position

Difference: WF8202498 has ports 180° apart; WF8202497, WF8202442, and WF8202488 have ports inline (0°); WF8202461’s ports are 90° counter-clockwise.

Selection Guide: Choose port orientation based on installation layout—inline for straight piping, 90°/180° for offset connections.

Inlet Size

Difference: WF8202498 uses 1″ NPT inlet; others have 1-1/4″ NPT inlet (except as noted).

Selection Guide: Ensure your inlet plumbing matches or can adapt to the pump’s inlet size.

Maximum Speed

Difference: WF8202461 supports highest speed (3400 RPM); others max at 2400–2800 RPM.

Selection Guide: For variable speed or high-RPM drives, WF8202461 is optimal.

Maximum Pressure

Difference: All models rated 2500 PSI max.

Selection Guide: Any model is suitable for systems up to 2500 PSI.

Quick Selection Guide

If you need: Lowest flow for precise, low-volume circuits

Choose: WF8202461

Because: It offers 6.2 GPM, lowest displacement, and highest RPM capacity.

If you need: Moderate flow with left-hand rotation and splined shaft

Choose: WF8202498

Because: It provides 8.4 GPM, left-hand rotation, and a 9-tooth splined shaft for high torque.

If you need: Moderate flow, right-hand rotation, keyed shaft, and inline ports

Choose: WF8202497

Because: It matches 8.4 GPM output with practical port and shaft configuration for standard setups.

If you need: Maximum flow in this series (13.5 GPM), right-hand rotation

Choose: WF8202442 or WF8202488

Because: Both provide highest displacement and flow rate, ideal for high-volume hydraulic systems.

Compatibility: All models are 100% interchangeable with Vickers replacement pumps, adhere to SAE J744 mounting, and use G1″/G1/2″ BSPP ports for straightforward replacement.

For model selection assistance, call Northern Hydraulics’ hydraulic specialists at (800) 823-4937, Mon-Fri, 7 AM – 5 PM MST. Same-day shipping is available on in-stock units, and all pumps include a 12-month manufacturer warranty. Volume pricing starts at 4 units.

Compatibility & Applications

Direct Replacement Information

Fluidyne WF8202498 provides exact replacement for Vickers WF8202498 applications in systems requiring 26.6 cm³/r (1.62 in³/r) displacement and up to 2500 PSI operation. This direct interchange ensures seamless fit and performance where V20 series pumps are specified..

Mounting Pattern: SAE ‘A’ 2-bolt
Inlet Port: G1″ BSPP
Outlet Port: G1/2″ BSPP

Common Applications

Commonly used in industrial machinery applications, material handling, and production equipment.

industrial machinery
material handling
production equipment

Important: Verify pump model WF8202498 matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.

Purchasing Information

Availability & Delivery

Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.

For current availability on WF8202498, call or explore our single stage vane pumps for similar models. (800) 823-4937.

Warranty & Protection

12-month warranty covers manufacturing defects
30-day return window for unopened units
Free technical verification before ordering
Each pump pressure tested before shipment

Ordering Options

Order online for immediate processing. Phone orders welcome at (800) 823-4937.

Net 30 terms available for approved accounts.

Volume pricing available on orders of 4 or more units.

Support & Documentation

Installation guide included with every shipment—see our Vickers replacement pumps documentation specifications for detailed specs.
Technical drawings and specifications available
Cross-reference guides for common brands and hydraulic pumps specifications families
Phone support: Monday-Friday, 7 AM – 5 PM MST

Questions? Call our specialists: (800) 823-4937

SKU: WF8202498

Fluidyne V20 WF8202498 Vane Pump | Replacement for Vickers/Eaton V201R8P62A11L 2.7 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Name: Fluidyne V20 WF8202498 Vane Pump | Replacement for Vickers/Eaton V201R8P62A11L 2.7 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft
Brand: Northern Hydraulics Inc.
SKU: WF8202498
Price: 299.2 USD
Availability: InStock