Home » Hydraulics Shop » Hydraulic Pumps » Hydraulic Vane Pumps » Single Stage Vane Pumps » Fluidyne V20 WF8202425 Vane Pump | Replacement for Vickers/Eaton V201S10S1A11L 3.3 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Fluidyne V20 WF8202425 Vane Pump | Replacement for Vickers/Eaton V201S10S1A11L 3.3 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft

Fluidyne V20 WF8202425 Vane Pump | Replacement for Vickers/Eaton V201S10S1A11L 3.3 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft - Image 2

Specifications

Weight	18 lbs
Pump Mounting Flange	2-Bolt Flange (SAE "A" size)
Manufacturer	Fluidyne Fluid Power
Pumps Drive Shaft	3/4" Straight Shaft with Key
Pumps Rotation	Left-Hand (Counter-Clockwise)
Pumps Max Pressure	2500 psi
Pumps Rated Speed	1200 RPM
Pumps Max Speed	2800 RPM
Pumps Displacement	32.8 cm³/r (2.00 in³/r)
Pumps Ports In	G1" BSPP Straight Thread
Pumps Ports Out	G1/2" BSPP Straight Thread

Product Selection Guide

These FluiDyne V20 Series hydraulic vane pumps are direct Vickers replacements, all sharing SAE ‘A’ 2-bolt flange mounting, G1″/G1/2″ BSPP straight thread ports, and 2500 PSI max pressure. The main differences are in flow rate, displacement, shaft configuration, port orientation, rotation direction, and maximum speed. Selecting the right model depends on your system’s required flow, space constraints, and rotational setup. For a complete overview of available hydraulic pumps, see our product family page.

?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.

Model Number	Flow Rate	Max Pressure	Displacement	Mounting
WF8202425 (Current)	10.4 GPM	2500 PSI	32.8 cm³/r (2.00 in³/r)	2-Bolt Flange (SAE “A” size)
V201P13P39C11R – FluiDyne V20 Pump (42.6 cm³/r (2.60 in³/r)) / WF8202442	13.5 GPM	2500 PSI	42.6 cm³/r (2.60 in³/r)	2-Bolt Flange (SAE “A” size)
V201P13P3A11R – FluiDyne V20 Pump (42.6 cm³/r (2.60 in³/r)) / WF8202488	13.5 GPM	2500 PSI	42.6 cm³/r (2.60 in³/r)	2-Bolt Flange (SAE “A” size)
WF8202461	6.2 GPM	2500 PSI	19.5 cm³/r (1.19 in³/r)	2-Bolt Flange (SAE “A” size)
V201P8P10D11R – FluiDyne V20 Pump (26.6 cm³/r (1.62 in³/r)) / WF8202497	8.4 GPM	2500 PSI	26.6 cm³/r (1.62 in³/r)	2-Bolt Flange (SAE “A” size)

Key Differences

Flow Rate & Displacement

Difference: WF8202461 provides 6.2 GPM (1.19 in³/r), WF8202497 offers 8.4 GPM (1.62 in³/r), WF8202425 delivers 10.4 GPM (2.00 in³/r), WF8202442 and WF8202488 both supply 13.5 GPM (2.60 in³/r).

Selection Guide: Select lower flow models (WF8202461, WF8202497) for smaller cylinders or precise control; higher flow models (WF8202442, WF8202488) for larger actuators or faster cycle times.

Rotation Direction

Difference: WF8202425 and WF8202461 are Left-Hand (Counter-Clockwise), while WF8202442, WF8202488, and WF8202497 are Right-Hand (Clockwise).

Selection Guide: Match rotation to your prime mover—ensure correct shaft rotation to avoid pump damage.

Port Position

Difference: WF8202425: 180° (opposite inlet); WF8202461: 90° CCW from inlet; WF8202442, WF8202488, WF8202497: Inline (0°).

Selection Guide: Choose port orientation based on piping layout—inline for straightforward connections, 90°/180° for confined or angled installations.

Shaft Configuration

Difference: WF8202425, WF8202461, and WF8202497 have standard 3/4″ straight keyed shafts (2.66″ extension). WF8202442 and WF8202488 feature 3/4″ straight keyed shafts (1.75″ extension) with special configurations (Codes 40/79).

Selection Guide: Use standard shafts for most retrofits; select special shaft codes if matching unique couplings or space constraints.

Maximum Speed

Difference: WF8202461: up to 3400 RPM; WF8202497: up to 2800 RPM; WF8202425: up to 2500 RPM; WF8202442/WF8202488: up to 2400 RPM.

Selection Guide: For high RPM prime movers, select WF8202461 or WF8202497; for typical applications, all models are suitable. If your system requires pumps with integral valves, see our expanded vane pump selection.

Quick Selection Guide

If you need: Lowest flow and highest RPM (6.2 GPM, up to 3400 RPM)

Choose: WF8202461

Because: Ideal for precise, low-volume systems or where high pump speed is required.

If you need: Mid-range flow with left-hand (CCW) rotation

Choose: WF8202425

Because: Delivers 10.4 GPM and fits left-hand drive applications.

If you need: Mid-range flow with right-hand (CW) rotation and inline ports

Choose: WF8202497

Because: Provides 8.4 GPM with straightforward plumbing and CW rotation.

If you need: Highest flow (13.5 GPM) with right-hand (CW) rotation

Choose: WF8202442 or WF8202488

Because: Best for systems requiring greater hydraulic power or faster cycle times; choose based on shaft code compatibility.

Compatibility: All models are 100% interchangeable with Vickers pumps, meet SAE J744 mounting standards, and use G1″/G1/2″ BSPP straight thread ports for seamless replacement.

For model selection, cross-referencing, or troubleshooting, contact a hydraulic specialist at Northern Hydraulics: (800) 823-4937, Mon-Fri, 7 AM – 5 PM MST.

Purchasing Information

Availability & Delivery

Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.

For current availability on WF8202425, call (800) 823-4937.

Warranty & Protection

12-month warranty covers manufacturing defects
30-day return window for unopened units
Free technical verification before ordering
Each pump pressure tested before shipment

Ordering Options

Order online for immediate processing. Phone orders welcome at (800) 823-4937. For more Vickers-compatible options, browse our Vickers replacement pumps catalog.

Net 30 terms available for approved accounts.

Volume pricing available on orders of 4 or more units.

Support & Documentation

Installation guide included with every shipment
Technical drawings and specifications available
Cross-reference guides for common brands
Phone support: Monday-Friday, 7 AM – 5 PM MST

Questions? Call our specialists: (800) 823-4937

Compatibility & Applications

Direct Replacement Information

Fluidyne WF8202425 provides exact replacement for Vickers WF8202425 applications in systems requiring 32.8 cm³/r (2.00 in³/r) displacement and up to 2500 PSI operating pressure.

Mounting Pattern: SAE J744 ‘A’ 2-bolt
Inlet Port: G1″ BSPP
Outlet Port: G1/2″ BSPP

Common Applications

Commonly used in industrial machinery applications, material handling, and production equipment.

industrial machinery
material handling
production equipment

Important: Verify pump model WF8202425 matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.

SKU: WF8202425

Fluidyne V20 WF8202425 Vane Pump | Replacement for Vickers/Eaton V201S10S1A11L 3.3 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Name: Fluidyne V20 WF8202425 Vane Pump | Replacement for Vickers/Eaton V201S10S1A11L 3.3 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft
Brand: Northern Hydraulics Inc.
SKU: WF8202425
Price: 299.2 USD
Availability: InStock