Home » Hydraulics Shop » Hydraulic Pumps » Hydraulic Vane Pumps » Single Stage Vane Pumps » Fluidyne V20 WF8201479 Vane Pump | Replacement for Vickers/Eaton V201S13S15B11L 4.3 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Fluidyne V20 WF8201479 Vane Pump | Replacement for Vickers/Eaton V201S13S15B11L 4.3 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft

Fluidyne V20 WF8201479 Vane Pump | Replacement for Vickers/Eaton V201S13S15B11L 4.3 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft - Image 2

Specifications

Weight	18 lbs
Pump Mounting Flange	2-Bolt Flange (SAE "A" size)
Manufacturer	Fluidyne Fluid Power
Pumps Drive Shaft	3/4" Straight Shaft with Key
Pumps Rotation	Left-Hand (Counter-Clockwise)
Pumps Max Pressure	2500 psi
Pumps Rated Speed	1200 RPM
Pumps Max Speed	2600 RPM
Pumps Displacement	42.6 cm³/r (2.60 in³/r)
Pumps Ports In	G1" BSPP Straight Thread
Pumps Ports Out	G1/2" BSPP Straight Thread

Product Selection Guide

These FluiDyne V20 Series hydraulic vane pumps are direct Vickers replacements, sharing SAE ‘A’ 2-bolt flange mounting and BSPP port threads, but differ mainly by flow rate, displacement, shaft type, rotation, port position, and maximum speed. Selecting the right model depends on your required flow output, available system speed, preferred rotation, and installation constraints. For more options, see our full selection of hydraulic pumps.

?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.

Model Number	Flow Rate	Max Pressure	Displacement	Mounting
WF8201479 (Current)	13.5 GPM	2500 PSI	42.6 cm³/r (2.60 in³/r)	2-Bolt Flange (SAE “A” size)
WF8201410	6.2 GPM	2500 PSI	19.5 cm³/r (1.19 in³/r)	2-Bolt Flange (SAE “A” size)
WF820149 (pumps with integral valves available)	6.2 GPM	2500 PSI	19.5 cm³/r (1.19 in³/r)	2-Bolt Flange (SAE “A” size)
WF8201412	8.4 GPM	2500 PSI	26.6 cm³/r (1.62 in³/r)	2-Bolt Flange (SAE “A” size)
WF8201424	8.4 GPM	2500 PSI	26.6 cm³/r (1.62 in³/r)	2-Bolt Flange (SAE “A” size)

Key Differences

Flow Rate and Displacement

Difference: Flow rates range from 6.2 GPM (1.19 in³/r) to 13.5 GPM (2.60 in³/r) at 1200 RPM.

Selection Guide: Select lower-displacement models (WF8201410, WF820149) for compact systems or low-flow circuits; choose WF8201479 for higher flow demands.

Shaft Type

Difference: Options include 3/4″ straight keyed shafts and 11-tooth splined shafts; some models have special shaft configurations.

Selection Guide: Choose splined shafts (WF820149, WF8201424) for high-torque or demanding drive applications; keyed shafts (WF8201410, WF8201412, WF8201479) suit standard couplings.

Rotation Direction

Difference: Models are available in both right-hand (clockwise) and left-hand (counter-clockwise) rotation.

Selection Guide: Match pump rotation to your prime mover—use left-hand (WF8201479, WF8201424) for engines or motors requiring counter-clockwise operation.

Port Position

Difference: Port orientation varies: 0° inline, 90° counter-clockwise, and 180° opposite from inlet.

Selection Guide: Select port positions based on plumbing layout—inline (WF820149, WF8201412), 90° (WF8201479, WF8201410), or 180° (WF8201424) to simplify hose routing in tight spaces.

Maximum Speed

Difference: Max speeds range from 2400 RPM (WF8201479) to 3400 RPM (WF8201410).

Selection Guide: If your system runs at higher speeds, choose WF8201410 (up to 3400 RPM); for standard speeds, other models suffice.

Quick Selection Guide

If you need: Highest flow for larger actuators (13.5 GPM at 1200 RPM, 2.60 in³/r displacement)

Choose: WF8201479

Because: Ideal for systems requiring maximum single-pump flow within the V20 frame size.

If you need: Compact flow and high speed (6.2 GPM at 1200 RPM, up to 3400 RPM)

Choose: WF8201410

Because: Best for smaller circuits or motors operating at higher RPMs.

If you need: Medium flow with splined shaft for high torque

Choose: WF820149 or WF8201424

Because: Splined shafts handle higher loads or misalignment in demanding drive conditions.

If you need: Left-hand (counter-clockwise) rotation or alternate port orientation

Choose: WF8201479 (90° ports) or WF8201424 (180° ports)

Because: Meets special installation or drive direction requirements.

If you need: undefined

Choose: WF820149 or WF8201412

Because: Simplifies hose routing in many installations.

Compatibility: All models are direct Vickers V20 replacements with SAE ‘A’ 2-bolt flange mounting and G1″/G1/2″ BSPP straight thread ports, ensuring full interchangeability and easy upgrade or service. See more vane pumps applications in our inventory.

For application-specific pump selection or cross-referencing older Vickers models, explore our Vickers replacement pumps or call our hydraulic specialists at (800) 823-4937, Mon-Fri, 7 AM – 5 PM MST. Same-day shipping is available for in-stock models, and volume pricing starts at 4 units. All pumps include a 12-month manufacturer warranty.

Compatibility & Applications

Direct Replacement Information

As a direct replacement for Vickers WF8201479, this Fluidyne pump delivers reliable hydraulic performance in systems requiring 42.6 cm³/r (2.60 in³/r) displacement and up to 2500 PSI. For additional compatibility details, view our full Vickers replacement pumps range. Full Vickers interchangeability ensures seamless integration and straightforward installation..

Mounting Pattern: SAE J744 ‘A’ 2-bolt
Inlet Port: G1″ BSPP
Outlet Port: G1/2″ BSPP

Common Applications

Commonly used in lifting equipment, conveyor systems, and processing machinery. For real-world examples, check out our applications of single stage vane pumps in industrial settings.

lifting equipment
conveyor systems
processing machinery

Important: Verify pump model WF8201479 matches your existing Vickers unit before ordering. For technical assistance or same-day shipping availability, contact (800) 823-4937.

Purchasing Information

Availability & Delivery

Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.

For current availability on WF8201479, view our hydraulic pumps stock online or call (800) 823-4937.

Warranty & Protection

12-month warranty covers manufacturing defects
30-day return window for unopened units
Free technical verification before ordering
Each pump pressure tested before shipment

Ordering Options

Order online for immediate processing. Phone orders welcome at (800) 823-4937.

Net 30 terms available for approved accounts.

Volume pricing available on orders of 4 or more units.

Support & Documentation

Installation guide included with every shipment—learn more about single stage vane pump installation
Technical drawings and specifications for vane pumps available
Cross-reference guides for common brands
Phone support: Monday-Friday, 7 AM – 5 PM MST

Questions? Call our specialists: (800) 823-4937

SKU: WF8201479

Fluidyne V20 WF8201479 Vane Pump | Replacement for Vickers/Eaton V201S13S15B11L 4.3 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Name: Fluidyne V20 WF8201479 Vane Pump | Replacement for Vickers/Eaton V201S13S15B11L 4.3 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft
Brand: Northern Hydraulics Inc.
SKU: WF8201479
Price: 299.2 USD
Availability: InStock

$299.20

In stock

No sales tax

Expected delivery Feb 20 - Feb 24

1+ $ 299.20/piece

4+ $ 284.24/piece -5%

8+ $ 269.28/piece -10%

Looking for help or a discount?

Call (800) 823-4937

Reviews (0)

Rating & Reviews (

There are no reviews yet.

5 star

4 star

3 star

2 star

1 star