(800) 823-4937
sales@northernhydraulics.net
| Weight | 37.0 lbs |
|---|---|
| Dimensions | 10 × 10 × 10 in |
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Product Selection Guide
These FluiDyne V2020 double vane pump specifications models differ mainly in front pump flow rate, rotation direction, port orientation, mounting, and shaft type. All are direct Vickers replacements, fully compatible with original Vickers specifications, and ideal for applications needing two flows from a single compact unit. Selection depends on required flow, rotation, and how the pump integrates with your hydraulic circuit specifications applications.
?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.
| Model Number | Flow Rate | Max Pressure | Displacement | Mounting |
|---|---|---|---|---|
| WF825915 (Current) | 11 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825913 | 13 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825975 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825063 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825884 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
Key Differences
Front Pump Flow Rate
Difference: WF825913 provides the highest front pump flow at 13 GPM; WF825915 delivers 11 GPM; the remaining models (WF825975, WF825063, WF825884) offer 10 GPM.
Selection Guide: Choose WF825913 for applications needing higher fluid delivery or faster actuator speeds; select 11 or 10 GPM models for lower flow requirements or smaller actuators.
Rear Pump Flow
Difference: WF825915 and WF825913 include a 1 GPM rear pump; WF825975, WF825063, and WF825884 have a 0 GPM rear pump.
Selection Guide: If your application requires a secondary low-flow circuit (e.g., pilot control or lube), select WF825915 or WF825913. If not, the 0 GPM models are suitable and may offer simplified plumbing.
Rotation Direction
Difference: WF825915 and WF825063 are right-hand (clockwise); WF825975 and WF825884 are left-hand (counter-clockwise). WF825913 is right-hand (clockwise).
Selection Guide: Match pump rotation to your prime mover (motor/engine) direction—select right-hand for standard engine/motor rotation or left-hand for reverse-drive configurations.
Port Orientation
Difference: WF825915 has front outlet opposite (180°) and rear inline (0°); WF825913 front inline (0°), rear at 90° CCW; WF825975 and WF825063 both outlets opposite inlet (180°); WF825884 both outlets inline with inlet (0°).
Selection Guide: Choose port orientation based on hose routing and space constraints—inline ports simplify straight connections, 90° or opposite arrangements can help avoid tight bends in confined installations.
Mounting and Shaft
Difference: WF825915, WF825975, WF825063, WF825884 feature 13-tooth splined shafts and SAE ‘B’ 4-bolt flanges; WF825913 uses a straight keyed shaft with SAE ‘A’ 2-bolt flange.
Selection Guide: Select splined shafts for higher-torque, vibration-prone environments; straight keyed shafts for standard coupling. Match mounting flange to your equipment’s pattern (SAE ‘A’ or ‘B’).
Quick Selection Guide
If you need: Highest flow for main circuit and a secondary low-flow output
Choose: WF825913
Because: Delivers 13 GPM (front) plus 1 GPM (rear) with a right-hand rotation and compact SAE ‘A’ mounting.
If you need: Mid-range flow with a secondary low-flow output and right-hand rotation
Choose: WF825915
Because: Provides 11 GPM (front) and 1 GPM (rear) with right-hand rotation, splined shaft, and SAE ‘B’ mounting.
If you need: Lower flow, single-output, left-hand rotation, and both outlets opposite inlet
Choose: WF825975
Because: Offers 10 GPM (front), 0 GPM (rear), left-hand rotation, ideal for mirrored drive setups.
If you need: Lower flow, single-output, right-hand rotation, both outlets opposite inlet
Choose: WF825063
Because: Similar to WF825975 but with right-hand rotation.
If you need: Lower flow, single-output, left-hand rotation, both outlets inline with inlet
Choose: WF825884
Because: Best for installations where straight-line hose routing is required.
Compatibility: All models are 100% interchangeable with Vickers V2020 series, use SAE J744 mountings, and support up to 2500 PSI. All feature G1″/G1/2″ BSPP straight thread ports for easy plumbing.
For model selection, application engineering, or troubleshooting, call Northern Hydraulics technical specialists at (800) 823-4937 (Mon-Fri, 7 AM – 5 PM MST). You can also explore our single stage vane pumps for other direct replacements. Volume pricing is available starting at 4 units, and all pumps include a 12-month manufacturer warranty. Same-day shipping available for in-stock items.
Purchasing Information
Availability & Delivery
Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.
For current availability on WF825915, call (800) 823-4937.
Warranty & Protection
- 12-month warranty covers manufacturing defects
- 30-day return window for unopened units
- Free technical verification before ordering
- Each pump pressure tested before shipment; pumps with integral valves available for specialized needs
Ordering Options
Order online for immediate processing. Phone orders welcome at (800) 823-4937.
Net 30 terms available for approved accounts.
Volume pricing available on orders of 4 or more units.
Support & Documentation
- Installation guide included with every shipment
- Technical drawings and specifications available; see similar models like V201P5P18C11R – FluiDyne V20 Pump
- Cross-reference guides for common brands; alternative options for similar applications include V201P13P3A11R – FluiDyne V20 Pump specifications
- Phone support: Monday-Friday, 7 AM – 5 PM MST
Questions? Call our specialists: (800) 823-4937
Compatibility & Applications
Direct Replacement Information
The Fluidyne WF825915 is a direct replacement for Vickers WF825915 pumps, matching key specifications such as 19.5 cm³/r (1.19 in³/r) displacement, 2500 PSI maximum pressure, and a rated speed of 1200 RPM. This model is fully interchangeable and meets SAE J744 mounting standards for seamless installation..
- Mounting Pattern: SAE ‘A’ 2-bolt
- Inlet Port: G1″ BSPP
- Outlet Port: G1/2″ BSPP
Common Applications
Commonly used in mobile hydraulics applications, auxiliary power units, compact equipment.
- mobile hydraulics
- auxiliary power units
- compact equipment
Important: Verify pump model WF825915 matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937. Same-day shipping is available for in-stock pumps, and all Fluidyne units come with a 12-month manufacturer warranty. Volume pricing is available starting at 4 units.
Fluidyne V2020 WF825915 Vane Pump | Replacement for Vickers/Eaton V2020-V20201F11S11S11AC30R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$822.80
Ready to order
No sales tax
Expected delivery Oct 13 - Oct 19
Get an exact shipping rate for your ZIP in the cart
Secure checkoutEncrypted card payments · pay over time with Affirm, Klarna or Afterpay
There are no reviews yet.