Home » Hydraulics Shop » Hydraulic Pumps » Hydraulic Vane Pumps » Double Stage Vane Pumps » Fluidyne V2020 WF825180 Vane Pump | Replacement for Vickers/Eaton V2020-V20201F11S11S1DD30R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Fluidyne V2020 WF825180 Vane Pump | Replacement for Vickers/Eaton V2020-V20201F11S11S1DD30R 2.0 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft

Fluidyne V2020 WF825180 Vane Pump | Replacement for Vickers/Eaton V2020-V20201F11S11S1DD30R 2.0 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft - Image 2

Specifications

Weight	37 lbs
Pump Mounting Flange	2-Bolt Flange (SAE "A" size)
Manufacturer	Fluidyne Fluid Power
Pumps Drive Shaft	3/4" Straight Shaft with Key
Pumps Rotation	Right-Hand (Clockwise)
Pumps Max Pressure	2500 psi
Pumps Rated Speed	1200 RPM
Pumps Max Speed	4000 RPM
Pumps Displacement	19.5 cm³/r (1.19 in³/r)
Pumps Ports In	G1" BSPP Straight Thread
Pumps Ports Out	G1/2" BSPP Straight Thread

Product Selection Guide

These FluiDyne V2020 double vane pumps are all direct Vickers replacements with SAE ‘B’ 4-bolt flange mounting and 1-1/16″-12 UN-2B threaded outlets. The key differences lie in total flow rates, individual front and rear pump outputs, port orientation, shaft type, rotation direction, and maximum pump speeds. Selecting the right model depends on your required total flow, preferred shaft and rotation, and specific port orientation. For a broader overview of hydraulic pumps and selection criteria, see our main product family page.

?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.

Model Number	Flow Rate	Max Pressure	Displacement	Mounting
WF825180 (Current)	11	2500 PSI	19.5 cm³/r (1.19 in³/r)	2-Bolt Flange (SAE “A” size)
WF825185	11	2500 PSI	19.5 cm³/r (1.19 in³/r)	2-Bolt Flange (SAE “A” size)
WF825183	13	2500 PSI	19.5 cm³/r (1.19 in³/r)	2-Bolt Flange (SAE “A” size)
WF825975	10	2500 PSI	19.5 cm³/r (1.19 in³/r)	2-Bolt Flange (SAE “A” size)
WF825063	10	2500 PSI	19.5 cm³/r (1.19 in³/r)	2-Bolt Flange (SAE “A” size)

Key Differences

Total Flow Rate

Difference: Models deliver between 10.0 and 21.0 GPM total flow

Selection Guide: Select WF825183 for highest total flow (21.0 GPM); choose WF825975 or WF825063 for smallest systems (10.0 GPM total)

Front and Rear Pump Output

Difference: WF825185: 11 GPM front / 9 GPM rear; WF825180: 11 GPM front / 1 GPM rear; WF825183: 13 GPM front / 8 GPM rear; WF825975 & WF825063: 10 GPM front / 0 GPM rear

Selection Guide: Choose WF825185 or WF825183 if you need two separate circuit flows; select WF825180 for a primary circuit with a small secondary flow; pick WF825975 or WF825063 for single circuit flow

Port Orientation

Difference: WF825180 & WF825185: outlets 90° CW from inlet; WF825183: outlets inline (0°); WF825975 & WF825063: outlets opposite inlet (180°)

Selection Guide: Choose port orientation that best matches your system plumbing for easiest installation and hose routing

Rotation Direction

Difference: WF825180, WF825185, WF825063: Right-Hand (Clockwise); WF825183, WF825975: Left-Hand (Counter-Clockwise)

Selection Guide: Match pump rotation to your drive motor or engine direction to ensure correct operation

Shaft Type

Difference: WF825180 & WF825183: Straight keyed shaft; WF825185, WF825975, WF825063: 13-tooth splined shaft

Selection Guide: Select splined shafts (WF825185, WF825975, WF825063) for higher torque or if your coupling requires it; use straight keyed for standard applications

Maximum Speed

Difference: WF825185: up to 2500 RPM; WF825183: 2400 RPM; WF825180, WF825975, WF825063: 1800 RPM (limited by rear pump)

Selection Guide: Choose WF825185 or WF825183 for higher RPM drives; WF825180, WF825975, WF825063 for low-to-moderate speed applications

Quick Selection Guide

If you need: Highest total flow (21.0 GPM) with two outputs

Choose: WF825183

Because: Delivers 13 GPM front and 8 GPM rear; best for systems needing two significant flows

If you need: Balanced dual circuit flows with higher RPM capability

Choose: WF825185

Because: Provides 11 GPM front and 9 GPM rear, runs up to 2500 RPM

If you need: Single primary circuit with minimal secondary flow

Choose: WF825180

Because: Supplies 11 GPM front and 1 GPM rear; secondary side can run a low-demand accessory

If you need: Single circuit, lowest total flow with 180° port orientation

Choose: WF825975 (left rotation) or WF825063 (right rotation)

Because: Each provides 10 GPM front, 0 GPM rear, and may fit compact or single-function systems

If you need: Specific port orientation to match your hydraulic plumbing

Choose: WF825183 for inline (0°), WF825180/WF825185 for 90° CW, WF825975/WF825063 for 180°

Because: Matching port orientation simplifies installation and reduces hose stress

If you need: Splined shaft interface for high-torque or non-slip coupling

Choose: WF825185, WF825975, or WF825063

Because: 13-tooth splined shaft handles higher torque and is compatible with splined drive couplings

Compatibility: All models are 100% interchangeable with Vickers V2020-series double vane pumps, built to SAE J744 mounting standards, and feature SAE ‘B’ 4-bolt flanges and 1-1/16″-12 UN-2B threaded outlets for easy replacement and system compatibility. Pressure ratings are consistent at 2500 PSI across all models.

For detailed pump selection, cross-referencing, or troubleshooting, Northern Hydraulics hydraulic specialists are available Monday-Friday, 7 AM – 5 PM MST at (800) 823-4937. For additional options, explore our full range of single stage vane pumps.

Purchasing Information

Availability & Delivery

Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.

For current availability on WF825180, call (800) 823-4937.

Warranty & Protection

12-month warranty covers manufacturing defects
30-day return window for unopened units
Free technical verification before ordering
Each pump pressure tested before shipment

Ordering Options

Order online for immediate processing. Phone orders welcome at (800) 823-4937. For OEMs or specialized needs, see our range of Vickers replacement pumps.

Net 30 terms available for approved accounts.

Volume pricing available on orders of 4 or more units.

Support & Documentation

Installation guide included with every shipment
Technical drawings and specifications available—see our full hydraulic pumps documentation for further technical details
Cross-reference guides for common brands, including Vickers replacement pumps specifications
Phone support: Monday-Friday, 7 AM – 5 PM MST

Questions? Call our specialists: (800) 823-4937

Compatibility & Applications

Direct Replacement Information

As a Vickers WF825180 replacement, this Fluidyne pump delivers reliable hydraulic performance in systems requiring 19.5 cm³/r (1.19 in³/r) displacement and up to 2500 PSI continuous operation. For alternate displacements, consider the V201P5P18C11R – FluiDyne V20 Pump (18.0 cm³/r, 1.10 in³/r). Direct Vickers interchangeability ensures seamless installation and compatibility with existing systems..

Mounting Pattern: SAE ‘A’ 2-bolt
Inlet Port: G1″ BSPP
Outlet Port: G1/2″ BSPP

Common Applications

Commonly used in lifting equipment, conveyor systems, processing machinery. Discover more real-world applications and performance case studies in our hydraulic pumps portfolio.

lifting equipment
conveyor systems
processing machinery

Important: Verify pump model WF825180 matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937 or review our vane pumps category for additional support resources.

SKU: WF825180

Fluidyne V2020 WF825180 Vane Pump | Replacement for Vickers/Eaton V2020-V20201F11S11S1DD30R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Looking for help or a discount?

Call (800) 823-4937

Reviews (0)

Rating & Reviews (

There are no reviews yet.

5 star

4 star

3 star

2 star

1 star