(800) 823-4937
sales@northernhydraulics.net
| Weight | 37.0 lbs |
|---|---|
| Dimensions | 10 × 10 × 10 in |
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Product Selection Guide
These FluiDyne V2020 double vane pump models differ mainly in total flow rate, front/rear section capacities, port orientation, shaft type, and maximum speed. All models are direct Vickers replacements, meet SAE J744 standards, and are rated to 2500 PSI, making them 100% interchangeable in most Vickers applications. Selecting the right pump depends primarily on your required total flow, individual section flow requirements, port orientation needs, and shaft/coupling preferences. For a complete range of options, view our hydraulic pumps applications lineup.
?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.
For single circuit demands or simplified systems, see our single stage vane pumps specifications as well.
| Model Number | Flow Rate | Max Pressure | Displacement | Mounting |
|---|---|---|---|---|
| WF825330 (Current) | 11 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825332 | 11 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825334 | 8 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825975 (V20201F10S10S11AA30L) | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825063 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
Key Differences
Total Flow & Section GPM
Difference: WF825330 and WF825332 deliver the highest total flow (17–20 GPM from both sections), while WF825063 and WF825975 provide only 10 GPM from a single pump section.
Selection Guide: Choose WF825330 or WF825332 for systems requiring simultaneous high- and medium-flow circuits, such as Hi-Lo applications. Select WF825063 or WF825975 where only a single section is needed, or where a secondary section is not used.
Front/Rear Pump Output
Difference: WF825330: 11 GPM front / 6 GPM rear; WF825332: 11 GPM front / 9 GPM rear; WF825334: 8 GPM front / 8 GPM rear; WF825063 & WF825975: 10 GPM front / 0 GPM rear.
Selection Guide: Choose WF825332 if you need more flow from the rear section (9 GPM); WF825334 for balanced dual 8 GPM outputs; WF825330 for larger flow front with smaller rear; WF825063 or WF825975 for single-section demand.
Maximum Speed
Difference: WF825334 supports up to 2800 RPM; WF825330 and WF825332 up to 2500 RPM; WF825063 and WF825975 up to 1800 RPM (limited by rear pump).
Selection Guide: WF825334 is best for higher speed drive systems. Use WF825063 or WF825975 only if your drive speed is below 1800 RPM.
Port Orientation
Difference: WF825330: Front 90° CCW, rear 180°; WF825332: Front 90° CW, rear 90° CCW; WF825334: Front 180°, rear inline (0°); WF825063 & WF825975: both outlets 180°.
Selection Guide: Match port orientation to your piping layout: choose inline or 180° for straight-through connections, 90° for side exits in tight spaces.
Shaft Type
Difference: WF825330 and WF825332 use standard straight keyed shafts; WF825334, WF825063, and WF825975 use 13-tooth splined shafts.
Selection Guide: For high-torque or splined couplings, pick a splined shaft model (WF825334, WF825063, WF825975). For standard coupling, choose straight key (WF825330, WF825332). Similar high-torque configurations are available in our pumps with integral valves category.
Rotation
Difference: WF825332 and WF825063 are right-hand (clockwise); WF825334 and WF825975 are left-hand (counter-clockwise); WF825330 not specified.
Selection Guide: Ensure rotation matches your drive motor—right-hand for CW, left-hand for CCW.
Quick Selection Guide
If you need: Highest total flow with strong rear section output
Choose: WF825332
Because: It provides 20 GPM total (11 GPM front, 9 GPM rear) for demanding dual-section circuits.
If you need: Balanced flows in both pump sections and higher RPM capability
Choose: WF825334
Because: It offers 8 GPM front and rear with 2800 RPM max—ideal for applications needing even split flows at higher speeds.
If you need: Single-section flow (rear section unused or blocked)
Choose: WF825063 or WF825975
Because: These models deliver all flow through the front section and are suited for single-circuit systems.
If you need: Splined shaft for high-torque drive
Choose: WF825334, WF825063, or WF825975
Because: These models have 13-tooth splined shafts suitable for demanding applications.
Compatibility: All models are direct Vickers replacements, 100% interchangeable, and use SAE ‘A’ mounting and G1″/G1/2″ BSPP ports for easy system integration. Compare additional hydraulic pumps and vane pump options for your setup.
For detailed pump selection or application troubleshooting, call Northern Hydraulics at (800) 823-4937, Mon-Fri, 7 AM – 5 PM MST. Volume pricing available on 4+ units. All pumps include a 12-month manufacturer warranty. Same-day shipping on in-stock items.
Compatibility & Applications
Direct Replacement Information
The Fluidyne WF825330 is a direct replacement for Vickers WF825330, designed for hydraulic systems requiring 19.5 cm³/r (1.19 in³/r) displacement and up to 2500 PSI operation. This V2020 series pump ensures 100% interchangeability, following SAE J744 mounting standards for seamless integration. For other models in the series, browse our vane pumps and Vickers replacement pumps categories.
- Mounting Pattern: SAE ‘A’ 2-bolt
- Inlet Port: G1″ BSPP
- Outlet Port: G1/2″ BSPP
Common Applications
Commonly used in industrial machinery, material handling, production equipment.
- See also: V201P13P3C11R – FluiDyne V20 Pump for high-flow material handling and production systems.
- industrial machinery
- material handling
- production equipment
Important: Verify pump model WF825330 matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.
Purchasing Information
Availability & Delivery
Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.
For current availability on WF825330, call (800) 823-4937.
Warranty & Protection
- 12-month warranty covers manufacturing defects
- 30-day return window for unopened units
- Free technical verification before ordering
- Each pump pressure tested before shipment; our single stage vane pumps undergo similar quality control.
Ordering Options
Order online for immediate processing. Phone orders welcome at (800) 823-4937.
Net 30 terms available for approved accounts.
Volume pricing available on orders of 4 or more units.
Support & Documentation
- Installation guide included with every shipment
- Technical drawings and specifications available
- Cross-reference guides for common brands
- Phone support: Monday-Friday, 7 AM – 5 PM MST
Questions? Call our specialists: (800) 823-4937 For additional technical resources, installation guides, and cross-reference tools, see our hydraulic pumps documentation.
Fluidyne V2020 WF825330 Vane Pump | Replacement for Vickers/Eaton V2020-V20201F11S6S51BA20R035 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$822.80
Ready to order
No sales tax
Expected delivery Oct 13 - Oct 19
Get an exact shipping rate for your ZIP in the cart
Secure checkoutEncrypted card payments · pay over time with Affirm, Klarna or Afterpay
There are no reviews yet.