(800) 823-4937
sales@northernhydraulics.net
| Weight | 37.0 lbs |
|---|---|
| Dimensions | 10 × 10 × 10 in |
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Product Selection Guide
The FluiDyne V2020 double vane pump models listed differ primarily in their front and rear pump flow rates, total flow output, outlet port orientation, shaft type, and maximum speed limits. All are direct Vickers replacements, follow SAE mounting standards, and support up to 2500 PSI, but are best matched to different hydraulic system requirements based on these measurable specs. For more information on how vane pumps perform in real-world applications, see our application guides.
?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.
| Model Number | Flow Rate | Max Pressure | Displacement | Mounting |
|---|---|---|---|---|
| WF825068 (Current) | 12 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825063 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825066 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825065 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825060 | 7 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
Key Differences
Front/Rear Pump Flow Rate & Total Flow
Difference: WF825068 delivers the highest total flow (18.0 GPM: 12 GPM front + 6 GPM rear), WF825065 offers 17.0 GPM (10+7), WF825066 provides 16.0 GPM (10+6), WF825060 has 16.0 GPM (7+9), and WF825063 delivers the lowest total flow at 10.0 GPM (10+0).
Selection Guide: Choose WF825068 for highest total flow demands, WF825065 or WF825066 for balanced dual outputs, WF825060 where rear flow is prioritized, and WF825063 for applications needing only single-section flow. For closely related options, see the V20201F10S10S11AA30L – FluiDyne V2020 series.
Maximum Speed
Difference: WF825068 is limited to 2400 RPM, WF825065 and WF825066 to 2500 RPM, WF825063 to 1800 RPM (due to rear pump being inactive), and WF825060 to 2800 RPM (limited by rear pump).
Selection Guide: Select WF825060 if higher RPM operation is critical; choose others based on your system’s speed capabilities.
Port Orientation
Difference: WF825068 and WF825065 have both outlets inline with the inlet (0°), while WF825066 and WF825063 have outlets opposite the inlet (180°). WF825060 also features inline outlets.
Selection Guide: Inline port orientation (0°) simplifies straight-line plumbing; 180° orientation is better for systems where rear connections are needed or space is tight.
Shaft Type
Difference: WF825068 and WF825060 use a straight keyed shaft; WF825065, WF825066, and WF825063 use a 13-tooth splined shaft.
Selection Guide: Choose splined shaft models for higher torque or if your coupling requires a splined input; use keyed shaft models for standard applications.
Rear Pump Operation
Difference: WF825063’s rear pump is inactive (0 GPM), unlike the other models which provide dual outputs.
Selection Guide: Select WF825063 if your application only requires a single flow output in a double-pump housing, which may aid in future upgrades or space matching.
Quick Selection Guide
If you need: Maximum total flow (18.0 GPM) for high-demand dual-circuit systems
Choose: WF825068
Because: It provides the highest combined flow with balanced front and rear outputs and inline ports.
If you need: Higher rear pump flow or system prioritizes rear section (9 GPM rear, 7 GPM front)
Choose: WF825060
Because: The rear section delivers more flow and supports higher RPM (up to 2800), useful for multi-speed circuits.
If you need: Balanced dual outputs with moderate total flow (17.0 GPM, 10+7)
Choose: WF825065
Because: Both sections are productive; suitable for applications needing two simultaneous flows.
If you need: Dual outputs with slightly lower total flow or 180° port layout
Choose: WF825066
Because: Provides two outputs and ports opposite inlet for flexible plumbing. For pumps with additional integrated features, explore our pumps with integral valves category.
If you need: Single-flow output in a double pump frame (10 GPM front, rear inactive)
Choose: WF825063
Because: Ideal for systems only needing one flow now but may expand later, or where matching double pump dimensions is important.
Compatibility: All models are direct Vickers replacement pumps for the V2020 series, 100% interchangeable, and use SAE ‘B’ 4-bolt flange mounting and 1-1/16″-12 UN-2B threaded outlets, ensuring easy system upgrade or replacement.
For model selection, cross-referencing, or application engineering, Northern Hydraulics’ hydraulic specialists are available Mon-Fri, 7 AM – 5 PM MST at (800) 823-4937 applications. Explore our full range of hydraulic pumps for additional options and technical resources.
Compatibility & Applications
Direct Replacement Information
Engineered as a direct replacement for the Vickers WF825068, this Fluidyne pump provides reliable performance in systems demanding 19.5 cm³/r (1.19 in³/r) displacement and up to 2500 PSI operation. Its 12-month manufacturer warranty and same-day shipping on in-stock items ensure minimal downtime for your hydraulic equipment..
- Mounting Pattern: SAE ‘A’ 2-bolt
- Inlet Port: G1″ BSPP
- Outlet Port: G1/2″ BSPP
Common Applications
Commonly used in lifting equipment, conveyor systems, processing machinery. For additional performance options, compare with the V201P5P18C11R – FluiDyne V20 Pump applications. For more applications and real-world case studies, visit our vane pumps applications section.
- lifting equipment
- conveyor systems
- processing machinery
Important: Verify pump model WF825068 matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.
Purchasing Information
Availability & Delivery
Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.
For current availability on WF825068, call (800) 823-4937.
Warranty & Protection
- 12-month warranty covers manufacturing defects
- 30-day return window for unopened units
- Free technical verification before ordering
- Each pump pressure tested before shipment
Ordering Options
Order online for immediate processing. Phone orders welcome at (800) 823-4937. For other Vickers interchange options, see our full range of Vickers replacement pumps.
Net 30 terms available for approved accounts.
Volume pricing available on orders of 4 or more units.
Support & Documentation
- Installation guide included with every shipment
- Technical drawings and specifications available
- Cross-reference guides for common brands
- Phone support: Monday-Friday, 7 AM – 5 PM MST
Questions? Call our specialists: (800) 823-4937 or explore our hydraulic pumps knowledge base.
Fluidyne V2020 WF825068 Vane Pump | Replacement for Vickers/Eaton V2020-V20201F12S6S1CC30R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$822.80
Ready to order
No sales tax
Expected delivery Oct 09 - Oct 15
Get an exact shipping rate for your ZIP in the cart
Secure checkoutEncrypted card payments · pay over time with Affirm, Klarna or Afterpay
There are no reviews yet.