(800) 823-4937
sales@northernhydraulics.net
| Weight | 37.0 lbs |
|---|---|
| Dimensions | 10 × 10 × 10 in |
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Product Selection Guide
These FluiDyne V2020 double vane pumps all provide direct Vickers compatibility and are 100% interchangeable, but differ primarily in flow rate, pump section sizes, rotation direction, shaft type, port orientation, and maximum speed. Selecting the right model depends on your required combined flow, desired port alignment, drive coupling, and system rotation direction. For single circuit systems, see our single stage vane pumps for additional options.
?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.
| Model Number | Flow Rate | Max Pressure | Displacement | Mounting |
|---|---|---|---|---|
| WF825301 (Current) | 12 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825308 | 11 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825975 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825063 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825884 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
Key Differences
Combined Flow Rate
Difference: WF825301 delivers the highest total flow at 19.0 GPM (12 GPM front + 7 GPM rear). WF825308 supplies 12.0 GPM (11 + 1), while WF825975, WF825063, and WF825884 each deliver 10.0 GPM (10 + 0).
Selection Guide: Choose WF825301 for systems requiring the highest combined flow, especially where two circuits with different flows are needed. WF825308 is suited for moderate dual-circuit needs, while the 10 GPM models fit compact or single-circuit applications.
Front vs Rear Pump Output
Difference: WF825301 and WF825308 both provide flow from front and rear pumps, enabling two separate outputs. The other models (WF825975, WF825063, WF825884) have rear pumps listed at 0 GPM, functioning essentially as single-section pumps in a double housing.
Selection Guide: Select a two-output model (WF825301 or WF825308) for Hi-Lo circuits or systems needing two flows from one pump. Single-output double pumps are good for simple, space-saving installations.
Port Orientation
Difference: WF825301 and WF825884 have both outlets inline with the inlet (0°); WF825308, WF825975, and WF825063 have both outlets opposite the inlet (180°).
Selection Guide: Choose inline (0°) port orientation for easier plumbing in straight-run installations. Opt for 180° orientation when connections are on opposite sides of the pump or for specific manifold layouts.
Rotation Direction
Difference: WF825301, WF825308, and WF825063 rotate right-hand (clockwise). WF825975 and WF825884 rotate left-hand (counter-clockwise).
Selection Guide: Match the rotation to your drive system. Most standard applications require right-hand; left-hand models are for engines or power units with opposite rotation.
Shaft Type
Difference: WF825301 and WF825308 use a straight keyed shaft. WF825975, WF825063, and WF825884 use a 13-tooth splined shaft (with some listings also referencing straight key).
Selection Guide: Choose straight keyed shafts for standard couplings, or splined shafts for higher torque and longer shaft life in demanding applications.
Maximum Speed
Difference: WF825301 supports up to 2400 RPM, WF825308 up to 1800 RPM, and the remaining models are limited to 1800 RPM.
Selection Guide: For high-speed drives up to 2400 RPM, select WF825301. For close alternatives, consider FluiDyne V20 Pump options. For slower drives, the other models are suitable.
Quick Selection Guide
If you need: Dual circuit supply with highest flow (up to 19 GPM) and high speed (2400 RPM)
Choose: WF825301
Because: It offers both high front and rear pump outputs, ideal for complex hydraulic systems or Hi-Lo circuits.
If you need: Moderate dual circuit flow (11 + 1 GPM) with opposite side port orientation
Choose: WF825308
Because: Great for two distinct but unequal circuit demands where plumbing access requires 180° outlet ports.
If you need: Single circuit (or one-output) with 10 GPM flow and left-hand rotation
Choose: WF825975 or WF825884
Because: Both provide 10 GPM and are suited for counter-clockwise drive systems; select port orientation as needed.
If you need: Single circuit with 10 GPM flow and right-hand rotation
Choose: WF825063
Because: This model is ideal for standard clockwise rotation systems needing a compact, double-housing pump with single output.
Compatibility: All models feature SAE ‘B’ 4-bolt flange mounting and G1″/G1/2″ BSPP straight thread ports, ensuring direct Vickers interchangeability applications and simplified installation.
For application-specific guidance or technical support, explore our hydraulic pumps resource hub or call (800) 823-4937. All pumps include same-day shipping on in-stock units, volume pricing from 4 units, and a 12-month manufacturer warranty.
Compatibility & Applications
Direct Replacement Information
As a Vickers WF825301 replacement, this Fluidyne pump delivers in systems requiring 19.5 cm³/r (1.19 in³/r) displacement and up to 2500 PSI performance. For more options, browse our full range of Vickers replacement pumps. Designed for direct interchangeability, it ensures seamless integration and reliable operation..
- Mounting Pattern: SAE ‘A’ 2-bolt
- Inlet Port: G1″ BSPP
- Outlet Port: G1/2″ BSPP
Common Applications
Commonly used in lifting equipment, conveyor systems, processing machinery, similar to other single stage vane pumps applications in demanding industrial environments.
- lifting equipment
- conveyor systems
- processing machinery
Important: Verify pump model WF825301 matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.
Purchasing Information
Availability & Delivery
Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.
For current availability on WF825301, call (800) 823-4937.
Warranty & Protection
- 12-month warranty covers manufacturing defects
- 30-day return window for unopened units
- Free technical verification before ordering
- Each pump pressure tested before shipment
Ordering Options
Order online for immediate processing. Phone orders welcome at (800) 823-4937.
Net 30 terms available for approved accounts.
Volume pricing available on orders of 4 or more units.
Support & Documentation
- Installation guide included with every shipment
- Technical drawings and specifications available
- Cross-reference guides for common brands
- Phone support: Monday-Friday, 7 AM – 5 PM MST
Questions? Call our specialists: (800) 823-4937
Fluidyne V2020 WF825301 Vane Pump | Replacement for Vickers/Eaton V2020-V20201F12S7S1CC30R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$822.80
Ready to order
No sales tax
Expected delivery Oct 13 - Oct 19
Get an exact shipping rate for your ZIP in the cart
Secure checkoutEncrypted card payments · pay over time with Affirm, Klarna or Afterpay
There are no reviews yet.