(800) 823-4937
sales@northernhydraulics.net
| Weight | 37.0 lbs |
|---|---|
| Dimensions | 10 × 10 × 10 in |
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Compatibility & Applications
Direct Replacement Information
The Fluidyne WF825052 is a direct replacement for Vickers WF825052, and is featured within our Vickers replacement pumps category, engineered for seamless interchangeability in demanding hydraulic systems. As part of our extensive vane pumps selection, this model is trusted by OEMs and repair shops alike. This model offers a displacement of 19.5 cm³/r (1.19 in³/r), supports maximum pressures up to 2500 PSI, and is rated for 1200 RPM operation..
- Mounting Pattern: SAE J744 ‘A’ 2-bolt
- Inlet Port: Systems utilizing G1″ BSPP
- Outlet Port: G1/2″ BSPP
Common Applications
Commonly used in agricultural equipment, construction machinery, utility vehicles.
- agricultural equipment
- construction machinery
- utility vehicles
Important: Verify pump model WF825052 matches your existing Vickers unit before ordering. For technical assistance or to confirm interchangeability, contact Northern Hydraulics at (800) 823-4937. Same-day shipping is available for in-stock items, and volume pricing begins at 4 units. For a single-stage version, see V20201F10S10S11AA30L – FluiDyne V2020. All Fluidyne pumps include a 12-month manufacturer warranty. See more vane pump solutions proven in the field.
Product Selection Guide
These FluiDyne V2020 double vane pump models differ (compare with FluiDyne V20 Pump (18.0 cm³/r) for similar displacement in single-section format) primarily in total flow output, front and rear section capacities, shaft type, and maximum speed. All are direct Vickers replacements, interchangeable, and share SAE ‘B’ 4-bolt flange mounting and inline port orientation. Selection should be based on required combined flow, section sizes, and shaft compatibility. For applications with directional control built-in, browse our pumps with integral valves.
?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.
| Model Number | Flow Rate | Max Pressure | Displacement | Mounting |
|---|---|---|---|---|
| WF825052 (Current) | 6 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825058 | 12 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825059 | 12 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825054 | 13 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825056 | 13 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
Key Differences
Total Flow Output
Difference: WF825052 delivers 7.0 GPM, WF825058 13.0 GPM, WF825054 18.0 GPM, WF825059 21.0 GPM, WF825056 22.0 GPM
Selection Guide: Choose the model that matches your system’s peak flow needs; e.g., WF825056 for highest combined flow applications
Front/Rear Pump Section Output
Difference: Front pumps range from 6–13 GPM, rear sections from 1–9 GPM
Selection Guide: Pick higher front and/or rear outputs for circuits needing more capacity or to run two circuits at different flows, or review V201P13P3A11R – FluiDyne V20 Pump for high-capacity single pumps used in similar applications.
Maximum Speed
Difference: Models with rear pumps capped at 1 GPM are limited to 1800 RPM; those with higher rear GPM allow up to 2400 RPM
Selection Guide: If your system runs above 1800 RPM, select WF825059 or WF825056
Shaft Type
Difference: WF825052 and WF825058 use straight keyed shafts; WF825054, WF825056, WF825059 use 13-tooth splined shafts
Selection Guide: Select splined shaft models for higher torque or if your drive requires spline coupling
Quick Selection Guide
If you need: A compact pump for low flow or pilot circuits (7 GPM total, very small rear section)
Choose: WF825052
Because: It provides minimal secondary flow and fits low-output requirements
If you need: Moderate total flow with minimal secondary circuit (13 GPM front + 1 GPM rear)
Choose: WF825058
Because: Best for main system with small auxiliary need, at up to 1800 RPM
If you need: Balanced higher flows for both circuits (13 GPM front + 9 GPM rear, 22 GPM total)
Choose: WF825056
Because: Ideal for Hi-Lo circuits or dual functions at up to 2400 RPM
If you need: High flow but with splined shaft for higher torque transmission
Choose: WF825054, WF825056, or WF825059
Because: These models feature 13-tooth splined shafts and higher combined flows
If you need: Two circuits with high but unequal flows (12 GPM front + 9 GPM rear, 21 GPM total)
Choose: WF825059
Because: Good for applications needing a strong main flow and robust secondary circuit
Compatibility: All models are 100% interchangeable with Vickers V2020 double pumps, including both double and single-stage configurations, use SAE ‘B’ 4-bolt mounting, and feature inline outlet ports for straightforward retrofits.
For pump sizing, shaft selection, or cross-reference questions, call our specialists at (800) 823-4937 (Mon-Fri, 7 AM – 5 PM MST). Volume pricing starts at 4 units; all pumps include a 12-month manufacturer warranty and same-day shipping on in-stock items.
Purchasing Information
Availability & Delivery
Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.
For current availability on WF825052, call or browse our full Vickers replacement pump inventory. (800) 823-4937.
Warranty & Protection
- 12-month warranty covers manufacturing defects
- 30-day return window for unopened units
- Free technical verification before ordering
- Each pump pressure tested before shipment
Ordering Options
Order online for immediate processing. Phone orders welcome at (800) 823-4937.
Net 30 terms available for approved accounts.
Volume pricing available on orders of 4 or more units.
Support & Documentation
- Installation guide included with every shipment (see our full line of hydraulic pumps specifications for more support options)
- Technical drawings and specifications available
- Cross-reference guides for common brands
- Phone support: Monday-Friday, 7 AM – 5 PM MST
Questions? Call our specialists or see our complete hydraulic pump selection: (800) 823-4937
Fluidyne V2020 WF825052 Vane Pump | Replacement for Vickers/Eaton V2020-V20201F6S11S1CC30R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$822.80
Ready to order
No sales tax
Expected delivery Oct 14 - Oct 20
Get an exact shipping rate for your ZIP in the cart
Secure checkoutEncrypted card payments · pay over time with Affirm, Klarna or Afterpay
There are no reviews yet.