(800) 823-4937
sales@northernhydraulics.net
| Manufacturer | Fluidyne Fluid Power |
|---|---|
| Pumps Max Pressure | 2,500 PSI |
| Pumps Rated Speed | 1,200 RPM |
| Pumps Max Speed | 4,000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Shipping weight | 37 lb |
| Package size | 10 × 10 × 10 in |
Product Selection Guide
These FluiDyne V2020 double vane pump models differ mainly by combined flow rate, individual front/rear pump output, port orientation, maximum speed, and shaft type. For applications needing single-output solutions, see our single stage vane pumps lineup. All are direct Vickers replacements, follow SAE J744 standards, and support up to 2500 PSI, but are tailored for specific hydraulic circuit demands.
?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.
| Model Number | Flow Rate | Max Pressure | Displacement | Mounting |
|---|---|---|---|---|
| WF825060 (Current) | 7 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825063 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825066 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825065 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825068 | 12 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
Key Differences
Total Flow Rate
Difference: WF825060 and WF825066 deliver 16.0 GPM, WF825063 offers 10.0 GPM, WF825065 provides 17.0 GPM applications, and WF825068 delivers the highest at 18.0 GPM.
Selection Guide: Select WF825068 if your application requires the highest overall flow, or WF825063 for lower demand systems.
Front/Rear Pump Sizing
Difference: WF825060: Front 7 GPM / Rear 9 GPM; WF825063: Front 10 GPM / Rear 0 GPM; WF825066: Front 10 GPM / Rear 6 GPM; WF825065: Front 10 GPM / Rear 7 GPM; WF825068: Front 12 GPM / Rear 6 GPM.
Selection Guide: Choose based on whether your system requires balanced outputs or a higher flow from one section (e.g., WF825068 for more front section flow). For larger volume requirements, consider V201P5P18C11R – FluiDyne V20 Pump in similar applications.
Maximum Speed
Difference: WF825060: 2800 RPM; WF825063: 1800 RPM; WF825066 and WF825065: 2500 RPM; WF825068: 2400 RPM.
Selection Guide: For higher-speed applications, WF825060 allows up to 2800 RPM; for lower-speed, use WF825063.
Shaft Type
Difference: WF825060 & WF825068: Straight keyed shaft; WF825063, WF825066, WF825065: 13-tooth splined shaft.
Selection Guide: Opt for splined shafts (WF825063/066/065) in high-torque or splined coupling setups; straight keyed (WF825060/068) for standard keyed couplings.
Port Orientation
Difference: WF825060, WF825065, WF825068: Outlets inline with inlet (0°); WF825063, WF825066: Outlets opposite inlet (180°).
Selection Guide: Choose inline (0°) for straight-line plumbing, or 180° for installations needing ports on opposite sides.
Front Pump Maximum Output
Difference: WF825060: 7 GPM; WF825063/066/065: 10 GPM; WF825068: 12 GPM.
Selection Guide: If your circuit demands a high front section flow, WF825068 (12 GPM) offers the most.
Rear Pump Maximum Output
Difference: WF825060: 9 GPM; WF825063: 0 GPM; WF825066: 6 GPM; WF825065: 7 GPM; WF825068: 6 GPM.
Selection Guide: For applications needing substantial rear flow, WF825060 (9 GPM) or WF825065 (7 GPM) are preferred.
Quick Selection Guide
If you need: Highest total flow (18.0 GPM) and maximum front pump output (12 GPM)
Choose: WF825068
Because: Ideal for systems requiring robust primary flow with additional secondary flow.
If you need: Balanced dual output (7 GPM front / 9 GPM rear) with highest speed capability (2800 RPM)
Choose: WF825060
Because: Best for Hi-Lo circuits or dual circuits with moderate to high-speed demands.
If you need: Single-section operation (10 GPM front only, no rear)
Choose: WF825063
Because: Use when only one hydraulic circuit is needed or to simplify plumbing.
If you need: Moderate dual outputs with splined shaft for high-torque coupling
Choose: WF825066 or WF825065
Because: Both provide 10 GPM front (6 or 7 GPM rear) and splined shafts for demanding applications. For even greater displacement, review V201P13P3A11R – FluiDyne V20 Pump for high-flow requirements.
If you need: Specific port orientations for plumbing layout
Choose: WF825060, WF825065, or WF825068 for inline (0°); WF825063 or WF825066 for 180°
Because: Match pump port orientation to your system’s piping for easier installation.
Compatibility: All models are 100% interchangeable with Vickers replacement pumps, mount via SAE ‘B’ 4-bolt flange, and use 1-1/16″-12 UN-2B outlets. They support up to 2500 PSI and are covered by a 12-month manufacturer warranty. Volume pricing is available starting at 4 units, with same-day shipping on in-stock items.
For model selection, cross-referencing, or installation advice, call (800) 823-4937 to speak with a hydraulic specialist or explore our full pumps with integral valves range for advanced system needs.
Compatibility & Applications
Direct Replacement Information
Fluidyne WF825060 offers a direct Vickers WF825060 replacement, delivering 19.5 cm³/r (1.19 in³/r) displacement, 2500 PSI max pressure, and reliable operation in V2020 series hydraulic systems..
- Mounting Pattern: SAE J744 ‘A’ 2-bolt
- Inlet Port: G1″ BSPP
- Outlet Port: G1/2″ BSPP
Common Applications
Commonly used in industrial machinery, material handling, production equipment, and other hydraulic pump applications.
- industrial machinery
- material handling
- production equipment
Important: Verify the Fluidyne WF825060 matches your existing Vickers unit for 100% interchangeability. If you’re replacing a Vickers-compatible unit, our Vickers replacement pump guide can help with cross-reference. For technical support or ordering, call (800) 823-4937. Same-day shipping is available for in-stock pumps, with volume pricing beginning at 4 units and a 12-month manufacturer warranty included.
Purchasing Information
Availability & Delivery
Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.
For current availability on WF825060, call (800) 823-4937.
Warranty & Protection
- 12-month warranty covers manufacturing defects
- 30-day return window for unopened units
- Free technical verification before ordering
- Each pump pressure tested before shipment, following stringent vane pump quality standards.
Ordering Options
Order online for immediate processing, or browse our full selection of single stage vane pumps for alternative configurations. Phone orders welcome at (800) 823-4937.
Net 30 terms available for approved accounts.
Volume pricing available on orders of 4 or more units.
Support & Documentation
- Installation guide included with every shipment
- Technical drawings and specifications available
- Cross-reference guides for common brands
- Phone support: Monday-Friday, 7 AM – 5 PM MST
Questions? Call our specialists: (800) 823-4937
Fluidyne V2020 WF825060 Vane Pump | Replacement for Vickers/Eaton V2020-V20201F7S9S1CC30R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$822.80
Ready to order
No sales tax
Expected delivery Oct 19 - Oct 23
Get an exact shipping rate for your ZIP in the cart
Secure checkoutEncrypted card payments · pay over time with Affirm, Klarna or Afterpay
There are no reviews yet.