(800) 823-4937
sales@northernhydraulics.net
| Manufacturer | Fluidyne Fluid Power |
|---|---|
| Pumps Max Pressure | 2,500 PSI |
| Pumps Rated Speed | 1,200 RPM |
| Pumps Max Speed | 4,000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Left-Hand (Counter-Clockwise) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Shipping weight | 37 lb |
| Package size | 10 × 10 × 10 in |
Product Selection Guide
See our full range of hydraulic pumps for additional options and system compatibility.
These vane pumps from FluiDyne’s V2020 series are all designed as direct Vickers replacements, but differ mainly in flow rate, port orientation, pump rotation, and shaft configuration. The WF825717 stands out for offering genuine dual flow sections (8 GPM + 9 GPM), while the others (WF825975, WF825063, WF825884, WF825700) have only a single active pumping section. Port orientation and rotation options allow for adaptation to specific system layouts and drive directions.
?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.
| Model Number | Flow Rate | Max Pressure | Displacement | Mounting |
|---|---|---|---|---|
| WF825717 (Current) | 8 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825975 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825063 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825884 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825700 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
For single-stage requirements, explore our single stage vane pumps selection.
Key Differences
Total Flow Rate
Difference: WF825717 delivers 17.0 GPM (8 GPM + 9 GPM from front and rear pumps), while all others provide only 10.0 GPM (single front pump active, rear pump inactive).
Selection Guide: Choose WF825717 if your system requires dual independent flows or a higher total output.
Pump Rotation
Difference: WF825717, WF825975, WF825884 are left-hand (counter-clockwise); WF825063, WF825700 are right-hand (clockwise).
Selection Guide: Match the pump rotation to your drive motor or engine—left-hand for CCW drive, right-hand for CW.
Port Orientation
Difference: WF825717 and WF825884: outlets inline with inlet (0°); WF825975, WF825063: outlets opposite inlet (180°); WF825700: outlets 90° CW from inlet.
Selection Guide: Select the port orientation that best fits your plumbing—inline for straightforward runs, 180° for opposite-side connections, 90° for side exits in compact spaces.
Shaft Type
Difference: WF825717, WF825975, WF825063, WF825884: 13-tooth splined shaft; WF825700: 3/4″ straight keyed shaft.
Selection Guide: Splined shafts are preferable for high-torque, heavy-duty applications; keyed shafts for standard installations. See similar output options in the V201P5P18C11R – FluiDyne V20 Pump family.
Maximum Speed
Difference: WF825717: up to 2800 RPM, others: up to 1800 RPM (limited by rear pump section).
Selection Guide: Choose WF825717 for higher-speed applications. For large displacement systems, compare with V201P13P3A11R – FluiDyne V20 Pump for similar applications.
Quick Selection Guide
If you need: Dual flow sections or highest total flow (17.0 GPM) and speeds up to 2800 RPM
Choose: WF825717
Because: It provides two independently sized flows (8 GPM + 9 GPM) and supports higher RPM, ideal for Hi-Lo circuits or systems needing simultaneous different flows.
If you need: Single flow section (10.0 GPM) with left-hand rotation and inline port orientation
Choose: WF825884
Because: It matches standard left-hand drive and allows for straightforward plumbing.
If you need: Single flow section (10.0 GPM) with right-hand rotation and 90° port orientation
Choose: WF825700
Because: It suits applications with right-hand drive and requires side port access in tight installations.
If you need: Single flow section (10.0 GPM) with either rotation and opposite-side ports
Choose: WF825975 (left-hand) or WF825063 (right-hand)
Because: These allow flexible integration where opposite-side porting is needed.
Compatibility: All models are 100% Vickers-interchangeable, use SAE ‘B’ 4-bolt flange mountings, and have G1″/G1/2″ BSPP straight-thread ports for seamless system replacement. For options with valve integration, browse our pumps with integral valves. All pumps meet SAE J744 standards.
For tailored pump selection, hydraulic troubleshooting, or help cross-referencing Vickers part numbers, contact Northern Hydraulics’ specialists at (800) 823-4937, Mon-Fri, 7 AM – 5 PM MST. For more information on interchangeability, see our Vickers replacement pump guide. Same-day shipping available for in-stock units; 12-month manufacturer warranty included. Volume pricing begins at 4 units.
Purchasing Information
For comprehensive product selection, visit our hydraulic pumps catalog.
Availability & Delivery
Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.
For current availability on WF825717, call (800) 823-4937.
Warranty & Protection
- 12-month warranty covers manufacturing defects
- 30-day return window for unopened units
- Free technical verification before ordering
- Each pump pressure tested before shipment
Ordering Options
Order online for immediate processing. Phone orders welcome at (800) 823-4937.
Net 30 terms available for approved accounts.
Volume pricing available on orders of 4 or more units.
Support & Documentation
For additional technical resources, refer to our vane pump documentation and cross-reference guides.
- Installation guide included with every shipment
- Technical drawings and specifications available
- Cross-reference guides for common brands
- Phone support: Monday-Friday, 7 AM – 5 PM MST
Questions? Call our specialists: (800) 823-4937
Compatibility & Applications
See real-world uses and application case studies in our hydraulic pumps application library.
Direct Replacement Information
The Fluidyne WF825717 is a direct, 100% interchangeable replacement for Vickers WF825717, engineered for systems requiring 19.5 cm³/r (1.19 in³/r) displacement and up to 2500 PSI maximum pressure..
- Mounting Pattern: SAE ‘A’ 2-bolt
- Inlet Port: G1″ BSPP
- Outlet Port: G1/2″ BSPP
Common Applications
Commonly used in mobile hydraulics, auxiliary power units, compact equipment. For similar single-stage solutions, explore our single stage vane pumps applications options.
- mobile hydraulics
- auxiliary power units
- compact equipment
Important: Verify pump model WF825717 matches your existing Vickers unit before ordering. For technical assistance or to confirm interchangeability, contact Northern Hydraulics at (800) 823-4937.
Fluidyne V2020 WF825717 Vane Pump | Replacement for Vickers/Eaton V2020-V20201F8S9S11CC30L 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$822.80
Ready to order
No sales tax
Expected delivery Oct 19 - Oct 23
Get an exact shipping rate for your ZIP in the cart
Secure checkoutEncrypted card payments · pay over time with Affirm, Klarna or Afterpay
There are no reviews yet.