(800) 823-4937
sales@northernhydraulics.net
| Weight | 37.0 lbs |
|---|---|
| Dimensions | 10 × 10 × 10 in |
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Product Selection Guide
These FluiDyne V2020 double vane pump models are all direct Vickers replacements, offering varied front and rear pump flow rates, rotation direction, shaft types, and port orientations. The main differences impact total flow, suitability for right- or left-hand systems, and the ability to deliver dual flows for complex circuits. For a full overview of available vane pumps, see our product family.
?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.
| Model Number | Flow Rate | Max Pressure | Displacement | Mounting |
|---|---|---|---|---|
| WF825239 (Current) | 9 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825230 | 11 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825232 | 13 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825975 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825063 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
Key Differences
Total Flow Rate
Difference: WF825232 offers the highest total flow at 19.0 GPM, followed by WF825230 at 17.0 GPM, WF825239 at 15.0 GPM, and WF825063/WF825975 at 10.0 GPM (single section active).
Selection Guide: Select WF825232 for the highest system throughput, or WF825239/WF825063/WF825975 for moderate to lower flow requirements.
Front and Rear Pump Output
Difference: WF825239, WF825230, and WF825232 have both front and rear sections active (e.g., 9+6, 11+6, 13+6 GPM), while WF825063 and WF825975 have only the front section active (10+0 GPM). For more details on this variant, view the V20201F10S10S11AA30L – FluiDyne V2020 specification.
Selection Guide: Choose a two-section model (WF825239, WF825230, WF825232) for Hi-Lo circuits or dual flow applications; select WF825063/WF825975 for single flow circuits.
Maximum Speed
Difference: WF825239: 2800 RPM; WF825230: 2500 RPM; WF825232: 2400 RPM; WF825063/WF825975: 1800 RPM (limited by rear pump).
Selection Guide: For higher-speed requirements, WF825239 supports up to 2800 RPM; for standard speeds, all models suffice. For similar performance, consider the V201P5P18C11R – FluiDyne V20 Pump with comparable speed ratings.
Rotation Direction
Difference: WF825239, WF825230, WF825232, and WF825063 are right-hand (clockwise); WF825975 is left-hand (counter-clockwise).
Selection Guide: Match pump rotation to your system: select WF825975 for left-hand drives, others for right-hand.
Shaft Type
Difference: WF825239, WF825975, and WF825063 use a 13-tooth splined shaft; WF825230 and WF825232 use a straight keyed shaft.
Selection Guide: Choose splined shafts (e.g., WF825239) for high-torque or flexible coupling needs; keyed shafts (WF825230, WF825232) are standard. For pumps with additional integrated features, see our pumps with integral valves category.
Port Orientation
Difference: WF825239, WF825232, WF825063, WF825975: both outlets opposite inlet (180°); WF825230: front 90° CW, rear 90° CCW.
Selection Guide: Pick 180° orientation for in-line plumbing; 90° (WF825230) for installations with space constraints or side connections.
Quick Selection Guide
If you need: Highest total flow for dual-circuit or Hi-Lo systems
Choose: WF825232 (19.0 GPM, 13+6 GPM split, right-hand, keyed shaft) or explore our full range of Vickers replacement pumps
Because: It provides the most combined flow and is ideal for equipment needing simultaneous or sequential motions. For large-displacement requirements, see also the V201P13P3A11R – FluiDyne V20 Pump.
If you need: Moderate dual-flow with high RPM capability
Choose: WF825239 (15.0 GPM, 9+6 GPM, right-hand, splined shaft, up to 2800 RPM)
Because: It balances flow rates with higher speed limits and splined shaft for higher torque.
If you need: Single-flow operation or to replace a single-section pump
Choose: WF825063 (right-hand) or WF825975 (left-hand), each at 10.0 GPM
Because: Rear section is inactive, making these best for simplified circuits or replacements.
If you need: Side or offset porting for tight installations
Choose: WF825230 (front 90° CW, rear 90° CCW port orientation)
Because: 90° ports facilitate hose routing in confined spaces.
If you need: Left-hand (counter-clockwise) rotation
Choose: WF825975
Because: It’s the only model here with left-hand rotation.
Compatibility: All models are 100% interchangeable with Vickers equivalents, feature SAE J744 mounting and compatible port sizing, and support pressures up to 2500 PSI. To compare with our full hydraulic pumps applications selection, visit our main product page.
For application-specific model selection or troubleshooting, call our hydraulic specialists at (800) 823-4937 or see our single stage vane pumps for further options. (800) 823-4937 (Mon-Fri, 7 AM – 5 PM MST).
Compatibility & Applications
Direct Replacement Information
Designed as a direct replacement for Vickers WF825239, this Fluidyne V2020 series pump is engineered for systems requiring 19.5 cm³/r (1.19 in³/r) displacement and a maximum pressure rating of 2500 PSI. Benefit from 100% Vickers interchangeability, ensuring seamless integration and reliable performance in demanding hydraulic applications..
- Mounting Pattern: SAE ‘A’ 2-bolt
- Inlet Port: G1″ BSPP
- Outlet Port: G1/2″ BSPP
Common Applications
Commonly used in lifting equipment, conveyor systems, processing machinery. For more examples, review our hydraulic pumps in real-world applications.
- lifting equipment
- conveyor systems
- processing machinery
Important: Verify pump model WF825239 matches your existing Vickers unit before ordering. For technical assistance or recommendations, contact our hydraulic specialists at (800) 823-4937. Same-day shipping available on in-stock items; volume pricing starts at 4 units. All Fluidyne pumps are backed by a 12-month manufacturer warranty.
Purchasing Information
Availability & Delivery
Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.
For current availability on WF825239, call (800) 823-4937.
Warranty & Protection
- 12-month warranty covers manufacturing defects
- 30-day return window for unopened units
- Free technical verification before ordering
- Each pump pressure tested before shipment
Ordering Options
Order online for immediate processing. For a complete listing of hydraulic pumps, browse our online store. Phone orders welcome at (800) 823-4937.
Net 30 terms available for approved accounts.
Volume pricing available on orders of 4 or more units.
Support & Documentation
- Installation guide included with every shipment
- Technical drawings and specifications available
- Cross-reference guides for common brands
- Phone support: Monday-Friday, 7 AM – 5 PM MST
Questions? Call our specialists: (800) 823-4937
Fluidyne V2020 WF825239 Vane Pump | Replacement for Vickers/Eaton V2020-V20201F9S6S11AA30R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$822.80
Ready to order
No sales tax
Expected delivery Oct 13 - Oct 19
Get an exact shipping rate for your ZIP in the cart
Secure checkoutEncrypted card payments · pay over time with Affirm, Klarna or Afterpay
There are no reviews yet.