Home » Hydraulics Shop » Hydraulic Pumps » Hydraulic Vane Pumps » Double Stage Vane Pumps » Fluidyne V2020 WF825193 Vane Pump | Replacement for Vickers/Eaton V2020-V20201F9S9S11DD30L 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Fluidyne V2020 WF825193 Vane Pump | Replacement for Vickers/Eaton V2020-V20201F9S9S11DD30L 2.0 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft

Fluidyne V2020 WF825193 Vane Pump | Replacement for Vickers/Eaton V2020-V20201F9S9S11DD30L 2.0 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft - Image 2

Specifications

Weight	37 lbs
Pump Mounting Flange	2-Bolt Flange (SAE "A" size)
Manufacturer	Fluidyne Fluid Power
Pumps Drive Shaft	3/4" Straight Shaft with Key
Pumps Rotation	Left-Hand (Counter-Clockwise)
Pumps Max Pressure	2500 psi
Pumps Rated Speed	1200 RPM
Pumps Max Speed	4000 RPM
Pumps Displacement	19.5 cm³/r (1.19 in³/r)
Pumps Ports In	G1" BSPP Straight Thread
Pumps Ports Out	G1/2" BSPP Straight Thread

Product Selection Guide

Our vane pumps lineup gives you proven reliability and direct interchangeability with top OEM brands, supporting a wide range of industrial and mobile hydraulic systems.

These FluiDyne V2020 double vane pumps are all direct Vickers replacements, sharing core design, mounting, and pressure specs, but differ in flow rates, pump section combinations, rotation direction, shaft type, and port orientation. Selection depends on your required total flow, direction of system rotation, port layout preference, and shaft compatibility. For more options across all hydraulic pumps, explore our full catalog.

?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.

Model Number	Flow Rate	Max Pressure	Displacement	Mounting
WF825193 (Current)	9	2500 PSI	19.5 cm³/r (1.19 in³/r)	2-Bolt Flange (SAE “A” size)
WF825192	11	2500 PSI	19.5 cm³/r (1.19 in³/r)	2-Bolt Flange (SAE “A” size)
WF825194	9	2500 PSI	19.5 cm³/r (1.19 in³/r)	2-Bolt Flange (SAE “A” size)
WF825975	10	2500 PSI	19.5 cm³/r (1.19 in³/r)	2-Bolt Flange (SAE “A” size)
WF825063	10	2500 PSI	19.5 cm³/r (1.19 in³/r)	2-Bolt Flange (SAE “A” size)

Key Differences

Flow Rate & Pump Section Sizing

Difference: WF825192 offers a higher total flow (19.0 GPM) with asymmetric pump sections (front: 11 GPM, rear: 8 GPM). WF825193 and WF825194 both provide 18.0 GPM with matched 9 GPM sections. WF825975 and WF825063 have only the front pump active (10.0 GPM, rear: 0 GPM), suitable for single-output needs.

Selection Guide: Choose WF825192 for applications requiring two different flows; WF825193 or WF825194 for balanced dual outputs; WF825975 or WF825063 for single-circuit demands with double-pump packaging.

Rotation Direction

Difference: WF825193 and WF825975 are left-hand (counter-clockwise); WF825192, WF825194, and WF825063 are right-hand (clockwise).

Selection Guide: Match the pump rotation to your drive shaft rotation—select left-hand for CCW, right-hand for CW system drives.

Port Orientation

Difference: WF825193: both outlets 90° CW from inlet. WF825192, WF825194, WF825975, WF825063: both outlets opposite inlet (180°).

Selection Guide: Choose 90° port orientation (WF825193) for installations with limited straight-line access; 180° for standard inline piping.

Shaft Type

Difference: WF825193, WF825192, WF825975, WF825063 use 13-tooth splined shafts. WF825194 uses a straight keyed shaft.

Selection Guide: Use splined shafts for higher torque or if your coupling requires it; straight keyed shaft (WF825194) for standard keyed couplings.

Maximum Speed

Difference: WF825193 and WF825194: up to 2800 RPM. WF825192: 2500 RPM. WF825975 and WF825063: 1800 RPM (limited by rear pump).

Selection Guide: If your drive system operates above 1800 RPM, avoid WF825975 and WF825063. Select WF825193 or WF825194 for highest speed requirements.

Quick Selection Guide

If you need: Dual flows with higher front output (e.g., Hi-Lo circuits)

Choose: WF825192

Because: Front and rear sections provide 11 GPM and 8 GPM—ideal for separate circuit demands.

If you need: Balanced dual outputs and high RPM capacity

Choose: WF825193 (left-hand) or WF825194 (right-hand)

Because: Both offer 9 GPM front/rear, 18 GPM total, and operate up to 2800 RPM.

If you need: Single-circuit output but require double pump mounting

Choose: WF825975 (left-hand) or WF825063 (right-hand)

Because: Only the front pump is active, providing 10 GPM; suitable for future expansion or phased use.

If you need: 90° port orientation for compact or corner installations

Choose: WF825193

Because: Both outlets are 90° CW from the inlet, simplifying tight plumbing layouts.

If you need: Keyed shaft compatibility

Choose: WF825194

Because: Only this model features a straight keyed shaft for standard coupling systems.

Compatibility: All models are 100% Vickers interchangeable, utilize SAE ‘B’ 4-bolt flange mounting, and provide G1″/G1/2″ BSPP porting for straightforward retrofit or replacement.

For detailed pump selection, application engineering, or troubleshooting, contact Northern Hydraulics technical specialists at (800) 823-4937, Mon-Fri, 7 AM – 5 PM MST. To further explore our wide range of hydraulic pumps for every application, visit our main product page.

Compatibility & Applications

Direct Replacement Information

This Fluidyne unit serves as a direct replacement for Vickers WF825193 in systems requiring 19.5 cm³/r (1.19 in³/r) displacement and up to 2500 PSI max pressure. Designed for V2020 series applications, it delivers rated performance at 1200 RPM and matches all critical mounting and porting specifications..

Mounting Pattern: SAE ‘A’ 2-bolt
Inlet Port: G1″ BSPP
Outlet Port: G1/2″ BSPP

Common Applications

Commonly used in marine applications, stationary power units, and test stands, similar to other models like the V201P5P18C11R – FluiDyne V20 Pump.

For higher displacement needs, consider the V201P13P3A11R – FluiDyne V20 Pump.
marine applications
stationary power units
test stands

Important: Verify pump model WF825193 matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.

Purchasing Information

Availability & Delivery

Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.

For current availability on WF825193, call (800) 823-4937.

Warranty & Protection

12-month warranty covers manufacturing defects
30-day return window for unopened units
Free technical verification before ordering
Each pump pressure tested before shipment

Ordering Options

Order online for immediate processing. Phone orders welcome at (800) 823-4937. For other direct replacement or retrofit needs, compare our Vickers replacement pumps selection.

Net 30 terms available for approved accounts.

Volume pricing available on orders of 4 or more units.

Support & Documentation

Installation guide included with every shipment, and for single-output options review our single stage vane pumps specifications range.
Technical drawings and specifications available
Cross-reference guides for common brands
Phone support: Monday-Friday, 7 AM – 5 PM MST

Questions? Call our specialists: (800) 823-4937

SKU: WF825193

Fluidyne V2020 WF825193 Vane Pump | Replacement for Vickers/Eaton V2020-V20201F9S9S11DD30L 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft

Name: Fluidyne V2020 WF825193 Vane Pump | Replacement for Vickers/Eaton V2020-V20201F9S9S11DD30L 2.0 GPM | 2500 PSI | SAE 'A' 2-Bolt | 3/4" Keyed Shaft
Brand: Northern Hydraulics Inc.
SKU: WF825193
Price: 822.8 USD
Availability: InStock