(800) 823-4937
sales@northernhydraulics.net
| Weight | 37.0 lbs |
|---|---|
| Dimensions | 10 × 10 × 10 in |
| Pump Mounting Flange | 2-Bolt Flange (SAE "A" size) |
| Manufacturer | Fluidyne Fluid Power |
| Pumps Drive Shaft | 3/4" Straight Shaft with Key |
| Pumps Rotation | Right-Hand (Clockwise) |
| Pumps Max Pressure | 2500 psi |
| Pumps Rated Speed | 1200 RPM |
| Pumps Max Speed | 4000 RPM |
| Pumps Displacement | 19.5 cm³/r (1.19 in³/r) |
| Pumps Ports In | G1" BSPP Straight Thread |
| Pumps Ports Out | G1/2" BSPP Straight Thread |
Compatibility & Applications
Direct Replacement Information
This Fluidyne unit serves as a direct replacement for Vickers WF825611 in systems requiring 19.5 cm³/r (1.19 in³/r) displacement and up to 2500 PSI operating pressure..
- Mounting Pattern: SAE ‘A’ 2-bolt
- Inlet Port: G1″ BSPP
- Outlet Port: G1/2″ BSPP
Common Applications
Commonly used in marine applications, stationary power units, test stands.
- marine applications
- stationary power units
- test stands
Important: Verify pump model WF825611 matches your existing Vickers unit before ordering. For technical assistance, contact (800) 823-4937.
Product Selection Guide
The main differences between these FluiDyne V2020 double vane pump models are total flow rates, individual section output, shaft and rotation options, port orientation, and mounting flange style. Each model is suited for specific hydraulic circuit requirements, depending on needed flow split, rotation, and installation constraints.
?? Important: The specifications shown are for reference and comparison purposes. Always verify specifications with the official manufacturer documentation or contact our technical team at (800) 823-4937 before ordering to ensure compatibility with your application. We cannot accept returns due to specification mismatches.
| Model Number | Flow Rate | Max Pressure | Displacement | Mounting |
|---|---|---|---|---|
| WF825611 (Current) | 6 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825615 | 13 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825617 | 9 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825975 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
| WF825063 | 10 | 2500 PSI | 19.5 cm³/r (1.19 in³/r) | 2-Bolt Flange (SAE “A” size) |
Key Differences
Total Flow Rate
Difference: WF825611 and WF825615 both provide 14.0 GPM; WF825617 delivers the highest at 18.0 GPM; WF825975 and WF825063 offer 10.0 GPM each.
Selection Guide: Choose WF825617 for applications needing higher total system flow; select WF825611 or WF825615 for balanced dual flows around 14 GPM; choose WF825975 or WF825063 for lower flow requirements.
Front/Rear Pump Flow Split
Difference: WF825611: 6 GPM (front) + 8 GPM (rear); WF825615: 13 GPM (front) + 1 GPM (rear); WF825617: 9 GPM + 9 GPM; WF825975/WF825063: 10 GPM (front) + 0 GPM (rear).
Selection Guide: Choose WF825611 or WF825617 for circuits needing balanced or dual flows; WF825615 for high/low split flow (ideal for Hi-Lo circuits); WF825975 or WF825063 when only a single pump section is needed but double pump mounting is required.
Maximum Speed
Difference: WF825611 and WF825617 operate up to 2800 RPM; WF825615, WF825975, and WF825063 are limited to 1800 RPM due to rear pump section.
Selection Guide: Select WF825611 or WF825617 for high-speed drives; WF825615, WF825975, or WF825063 for standard-speed applications.
Mounting Flange Type
Difference: WF825611 uses SAE ‘A’ 2-bolt flange; WF825617, WF825975, and WF825063 use SAE ‘B’ 4-bolt flange.
Selection Guide: Choose the flange that matches your existing system; SAE ‘A’ fits smaller pumps, SAE ‘B’ for heavier-duty or larger-bore applications.
Rotation
Difference: WF825611 and WF825063 are right-hand (clockwise); WF825615, WF825617, and WF825975 are left-hand (counter-clockwise).
Selection Guide: Match pump rotation to your drive motor’s rotation—select right-hand for clockwise, left-hand for counter-clockwise shafts.
Shaft Type
Difference: WF825611 features a straight keyed shaft; others use a 13-tooth splined shaft.
Selection Guide: Choose straight keyed for standard couplings; splined shafts for higher torque or specific coupling requirements.
Port Orientation
Difference: WF825611 and WF825617: both outlets inline with inlet (0°); others: both outlets opposite inlet (180°).
Selection Guide: Inline (0°) ports simplify straight plumbing; 180° orientation is preferred when connections are on opposite sides.
Quick Selection Guide
If you need: Balanced dual flows up to 14 GPM
Choose: WF825611
Because: It provides 6 GPM and 8 GPM from each section, with high-speed capability and inline ports.
If you need: High/low flow split or Hi-Lo circuit
Choose: WF825615
Because: 13 GPM from the front and 1 GPM from the rear section is ideal for rapid approach/slow feed circuits.
If you need: Maximum total flow (18 GPM) and equal split
Choose: WF825617
Because: Delivers 9 GPM from each section, suited for systems requiring higher volume and balanced output.
If you need: Lowest total flow or single-section usage with double pump body
Choose: WF825975 or WF825063
Because: Only the front section supplies flow (10 GPM), useful for simplified circuits or future expansion.
If you need: Clockwise (right-hand) rotation
Choose: WF825611 or WF825063
Because: Both models are built for standard right-hand drive.
If you need: SAE ‘A’ 2-bolt flange mounting
Choose: WF825611
Because: Ensures compatibility with smaller frame mounts.
If you need: High torque or splined shaft interface
Choose: WF825615, WF825617, WF825975, or WF825063
Because: All feature 13-tooth splined shafts.
Compatibility: All models are direct Vickers replacements, follow SAE J744 mounting standards, and feature G1″/G1/2″ BSPP straight thread ports for straightforward interchangeability.
For model selection, cross-referencing, or hydraulic application engineering, contact Northern Hydraulics technical specialists at (800) 823-4937, Mon-Fri, 7 AM – 5 PM MST.
Purchasing Information
Availability & Delivery
Most hydraulic pumps ship within 1-2 business days. Made-to-order items typically require 5-7 business days.
For current availability on WF825611, call (800) 823-4937.
Warranty & Protection
- 12-month warranty covers manufacturing defects
- 30-day return window for unopened units
- Free technical verification before ordering
- Each pump pressure tested before shipment
Ordering Options
Order online for immediate processing. Phone orders welcome at (800) 823-4937.
Net 30 terms available for approved accounts.
Volume pricing available on orders of 4 or more units.
Support & Documentation
- Installation guide included with every shipment
- Technical drawings and specifications available
- Cross-reference guides for common brands
- Phone support: Monday-Friday, 7 AM – 5 PM MST
Questions? Call our specialists: (800) 823-4937
Fluidyne V2020 WF825611 Vane Pump | Replacement for Vickers/Eaton V2020-V20206F6S8S1CC30R 2.0 GPM | 2500 PSI | SAE ‘A’ 2-Bolt | 3/4″ Keyed Shaft
$1,269.90
Ready to order
No sales tax
Expected delivery Oct 13 - Oct 19
Get an exact shipping rate for your ZIP in the cart
Secure checkoutEncrypted card payments · pay over time with Affirm, Klarna or Afterpay
There are no reviews yet.